Category Archives: Software Defined Radio

Radio Waves: FCC Fines Drone Retailer, High School WSPR Buoy, Flashing Radio Firmware, and “Radio Recliner” Powered by Senior Resident DJs

Radio Waves:  Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers.  To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Ron, Pete Eaton, Paul Evans, and Jennifer Gulley for the following tips:


FCC Fines HobbyKing Nearly $3 Million for Marketing Unauthorized Drone Transmitters (ARRL News)

The FCC has issued a Forfeiture Order (FO) calling for HobbyKing to pay a fine of $2,861,128 for marketing drone transmitters that do not comply with FCC rules. An FCC Enforcement Bureau investigation stemmed in part from a 2017 ARRL complaint that HobbyKing was selling drone transmitters that operated on amateur and non-amateur frequencies, in some instances marketing them as amateur radio equipment. The fine affirms the monetary penalty sought in a June 2018 FCC Notice of Apparent Liability (NAL). The FCC said its investigation found that dozens of devices marketed by the company transmitted in unauthorized radio frequency bands and, in some cases, operated at excessive power levels. “Such unlawful transmissions could interfere with key government and public safety services, like aviation systems,” the FCC said.“We have fully considered HobbyKing’s response to the NAL, which does not contest any facts and includes only a variety of legal arguments, none of which we find persuasive,” the FCC said in the FO. “We therefore adopt the $2,861,128 forfeiture penalty proposed in the NAL.”[]

High School Marine Buoy Transmitter Now Active on 20-Meter WSPR (ARRL News)

Phil Karn, KA9Q; Randy Standke, KQ6RS, and members of the Mount Carmel High School Amateur Radio Club (MCHSARC) in San Diego have constructed and deployed an amateur radio marine buoy in the Pacific. The buoy, which transmits WSPR on 14.0956 MHz USB, has already been heard around the continental US, Brazil, Hawaii, Japan, Costa Rica, Australia, and South Africa.

“Over the past year, Randy and I have mentored the MCHSARC in designing and constructing a simple marine buoy that was deployed from the RV Sally Ride [on July 16], about 700 kilometers off the coast of southern California,” Karn said in a post on the AMSAT Bulletin Board. “It is up and transmitting WSPR on 20 meters using the call sign KQ6RS, and is being received all over the US and into Canada and Brazil.” Karn is blogging about the project with updates.

The electronics are the 20-meter WSPR version of the WB8ELK “pico tracker” that has been flown on long-duration balloons. “We removed the solar panels and substituted 21 ordinary alkaline D cells, wired to supply 4.5 V,” Karn explained. “We estimate battery lifetime will be 6 months.”

[…]The first reception report was on July 16 at 12:52:30 UTC from grid square CL89eu, although the current carried the buoy east into CL89fu at 20:32:30 UTC. The buoy (KQ6RS-1) can be tracked on the APRS and WSPRnet sites.[]

Stop Bad Laws Before They Start (Hackaday)

With everything else going on this summer, you might be forgiven for not keeping abreast of new proposed regulatory frameworks, but if you’re interested in software-defined radio (SDR) or even reflashing your WiFi router, you should. Right now, there’s a proposal to essentially prevent you from flashing your own firmware/software to any product with a radio in it before the European Commission. This obviously matters to Europeans, but because manufacturers often build hardware to the strictest global requirements, it may impact everyone. What counts as radio equipment? Everything from WiFi routers to wearables, SDR dongles to shortwave radios.

The idea is to prevent rogue reconfigurable radios from talking over each other, and prevent consumers from bricking their routers and radios. Before SDR was the norm, and firmware was king, it was easy for regulators to test some hardware and make sure that it’s compliant, but now that anyone can re-flash firmware, how can they be sure that a radio is conformant? Prevent the user from running their own firmware, naturally. It’s pretty hard for Hackaday to get behind that approach.[]

New Internet Radio Station Helps Seniors Share Their Favorite Music (NPR)

A new internet radio station called Radio Recliner has started during the coronavirus pandemic. It gives residents in senior living facilities a chance to share some of their favorite music.

Click here to check out the Radio Recliner website.


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Silphase R1 videos and information about power and antenna ports

We’re starting to get a little more info about the recently posted Silphase R1 SDR receiver. At this point, the radio isn’t in production and is obviously only in a prototype stage so there are a lot of question marks–including if it’ll ever come to fruition. The pandemic is obviously not an ideal time to launch and produce a new high-end radio. I, for one, certainly hope they do!

Many thanks to SWLing Post contributor, Mark Hirst asked Silphase about R1 external antenna support and power options. A Silphase representative replied:

“We are constantly redesigning the rear panel receiver Silphase R1, so we
can say for sure that there are 4 connectors – antenna F-type connector,
12.6 V power/charging, RJ-45 and USB”

And thanks to SWLing Post contributor, Paul, who received the following info from Silphase:

You can watch real videos on our YouTube channel.

https://www.youtube.com/channel/UCQN8YbKULHlkA4KBFt76Hhg

Sample videos:

Click here to view all of the videos on the Silphase YouTube channel.

As we learn more about the Siplase R1, we’ll publish it on the Post with the tag: R1.

The new Silphase R1 SDR receiver


I’ve just learned about a new SDR receiver in development by the Polish company Silphase. It’s called the Silphase R1 and appears to be a stand-alone, high-performance SDR receiver.

What could set this receiver apart from the rest is the:

  • Color backlit 5″ TFT touch screen display
  • Magnesium alloy body/chassis
  • USB out for recording and native logging
  • Record to internal “flash memory” (unclear if audio and/or spectrum)
  • Four internal speakers
  • 12.6V 12000 mAh, internal battery
  • IP55 rating for water/dust protection
  • The price is $1199/€1099 with no expected availability date at time of posting
  • Click here to download the PDF product brochure.

The receiver is portable and will measure 11.25×4.3×2.2in (285×110×55mm). Looks like the screen will be 5″ which should allow for a detailed spectrum viewing area (for comparison, the Icom IC-7300 TFT display is 4.3″)

Siphase is a new company based in Poland and they claim they also plan to eventually produce transceivers:

“At the end of 2020 we will introduce a 25W transceiver in the same form factor powered by an internal battery, and a bit little later a 100W transceiver in the same form factor also powered by an internal battery.”

The Silphase product page has a complete list of specifications, but here are some worth noting:

  • Frequency coverage RX 0.1–30MHz
  • Frequency resolution 1Hz
  • Frequency steps 1Hz to 1KHz
  • Dual VFO
  • Direct sampling 16bit high speed 122 M/s ADC
  • Modes: CW, SSB, AM, FM
  • Sensitivity 1.8–29.999MHz, SSB/CW: (BW: 2.4kHz at 10dB S/N) – 132 dBm, 0.06?V
  • 20dB LNA
  • Spurious and image rejection >90 dBm
  • Clipping level -3dBm
  • DSP (various filters, adaptive noise reduction, automatic notch filter, notch blanker, adjustable filters (0-1KHz HPF,0.5-6KHZ LPF, 50Hz step, etc.)
  • AGC (slow, medium, fast)
  • Main filter sharpness Factor 1.05 and lower
  • Audio recorder (use the internal flash memory or USB 16GB external flash memory)
  • Virtual USB audio card for OS update
  • Ham radio hardware log
  • OS QNX (“UNIX-like” real time operating system)
  • Telescopic antenna with F connector
  • Main optical encoder and four multifunction encoders
  • 6 input modes buttons (attenuators, adjustable filters, AGC, NB, auto notch filter, NR)
  • Power supply requirement 12.6 DC ±15%
  • Power consumption RX 0.6 A typical
  • Battery 12000 mAh, 12.6V (3×3.7V/12000 mAh)
  • Operating time 20 Hours
  • Operating temperature range –10C to +60C; 14F to 140F
  • Frequency stability Less than ±0.2ppm (–10?C to +60?C; 14?F to 140?F)
  • Dimensions (W×H×D) 285×110×55mm; 11.25×4.3×2.2in
  • Weight (approximately) 1.8kg; 4 lbs
  • Magnesium alloy body, IP55 (in future IP 67)
  • “Expected Operational Lifetime 30 Years” With One Year Warranty – Additional Warranty
  • Made in EU

As I learn more about this receiver and the company producing it, I’ll post updates with the tag: Silphase R1

Click here to check out the Silphase website.


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Sneak peek of the Apache Labs Andromeda 100 watt SDR transceiver

Many thanks to Apache Labs who share the following announcement:

Sneak peek at the Andromeda 100W Transceiver……

10th GEN Intel 6 Core i7, 7 inch built in touch screen and an option to add up to two External HD Monitors.

Windows 10 Powerful PC and an Ultra High performance 100W SDR with PureSignal Goodness in a single compact Box!

Run FT8 and other Digital Modes out of the box!

Coming Soon!

We will post more information about the Andromeda transceiver when we have solid details.

Radio Waves: Pack Thanks Interim Leaders, KE4ZXW Moves to Virginia Tech, WWV and WWVH Still Matter, and A New WebSDR in Iceland

Radio Waves:  Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers.  To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Tony, Dan Robinson, Michael Bird for the following tips:


USAGM CEO Michael Pack thanks interim heads of agency’s five broadcasting networks (USAGM)

Today, U.S. Agency for Global Media (USAGM) Chief Executive Officer Michael Pack thanked officials who will serve in an interim capacity as the heads of the agency’s two federal organizations and its three public service grantee broadcasting networks.

  • Elez Biberaj, who has led Voice of America (VOA)’s Eurasia Division since 2006, will serve as VOA’s Acting Director.
  • Jeffrey Scott Shapiro, previously Senior Advisor at Office of Cuba Broadcasting (OCB), will serve as OCB’s Acting Director and Principal Deputy Director.
  • Parameswaran Ponnudurai, who has been Vice President of Programming at Radio Free Asia (RFA) since 2014, will serve as RFA’s Acting President.
  • Kelley Sullivan, who has been a Vice President at Middle East Broadcasting Networks (MBN) since 2006, will serve as MBN’s Acting President.
  • Daisy Sindelar, who has been with RadioFreeEurope/RadioLiberty (RFE/RL) for nearly two decades, will serve as RFE/RL’s Acting President.

CEO Pack sent, in part, the following message to staff:

“The experience of these talented men and women, their knowledge of the networks, and their commitment to the standards of journalism will allow us to launch into the next exciting chapter of our agency. Dr. Biberaj, Mr. Shapiro, Mr. Ponnudurai, Ms. Sullivan, and Ms. Sindelar will serve critical roles in allowing our networks to become higher performing and to more effectively serve our audiences. For their willingness to step up and help lead this effort, I am deeply appreciative. I am excited to serve alongside them as well as with all of you.”

Virginia Air & Space Center Ends Relationship with Ham Radio (ARRL News)

Virginia Air & Space Center (VASC) Executive Director and CEO Robert Griesmer has advised that the Center’s amateur radio station exhibit will be discontinued, effective July 1, when the Center, in Hampton, Virginia, reopens. VASC is the official visitor center for NASA’s Langley, Virginia, facility. The KE4ZXW display station was shut down on March 13. It was to be out of the VASC by June 30. A main feature of the exhibit was the ability to communicate with amateur radio satellites and with the International Space Station.

Randy Grigg, WB4KZI, of the VASC Amateur Radio Group said the station’s equipment would be relocated. “Thanks to all who have supported KE4ZXW during the last 25 years, especially the volunteer operators who manned the station during that time,” Grigg said. “To the many visitors we have met and school groups that have stopped by and talked with us about ham radio, communications, satellites, and STEM Program related subjects, thank you!”

On June 30, it was announced that the Virginia Tech Amateur Radio Association (K4KDJ) in Blacksburg will be the new host for the KE4ZXW Amateur Radio Demonstration. — Thanks to Randy Grigg, WB4KZI, and Ed Gibbs, KW4GF[]

Why WWV and WWVH Still Matter (Radio World)

Last year was one of both celebration and uncertainty for WWV, the station adjacent to Fort Collins, Colo., that transmits automated time broadcasts on the shortwave bands.

On the plus side, it marked the 100th year of WWV’s call letters, making the site, operated by the National Institute of Standards and Technology, one of the world’s oldest continually operating radio stations.

On the negative side, WWV and its sister time station WWVH in Hawaii nearly missed this centennial. That’s because NIST’s original 2019 budget called for shutting down the pair, along with WWVB, the longwave code station co-located next to WWV, as a cost-saving move.

Fortunately, these cuts never happened, and WWV, WWVH and WWVB seem likely to keep broadcasting the most accurate time from NIST’s atomic clocks, at least for the immediate future. (No further cuts have been threatened.)[]

Another Shortwave WebSDR operational in Iceland (Southgate ARC)

On June 27, a new KiwiSDR web software defined radio became operational in Iceland

A translation of the IRA post reads:

The new receiver is located in Bláfjöll at an altitude of 690 meters. It has for the first time used, a horizontal dipole for 80 and 40 meters.

The KiwiSDR receiver operates from 10 kHz up to 30 MHz. You can listen to AM, FM, SSB and CW transmissions and select a bandwidth suitable for each formulation. Up to eight users can be logged into the recipient at the same time.

Ari Þórólfur Jóhannesson TF1A was responsible for the installation of the device today, which is owned by Georg Kulp, TF3GZ.
Bláfjöll: http://blafjoll.utvarp.com/

The other two receivers that are active are located at Bjargtångar in Vesturbyggð, Iceland’s westernmost plains and the outermost point of Látrabjarg and at Raufarhöfn. Listen at:
Bjargtångar: http://bjarg.utvarp.com/
Raufarhöfn: http://raufarhofn.utvarp.com/

The IRA Board thanks Ara and Georg for their valuable contributions. This is an important addition for radio amateurs who are experimenting in these frequency bands, as well as listeners and anyone interested in the spread of radio waves.

Source IRA https://tinyurl.com/IcelandIRA

KiwiSDR Network
http://kiwisdr.com/public/


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

EladUSA now selling the Perseus with factory support from Microtelecom

Many thanks to Paul Jones with EladUSA who notes that they now sell the venerable Microtelecom Perseus via their online store. Paul also notes that each purchase comes with full factory support from Microtelecom. Price is $760 US.

Click here to view at EladUSA.