KSEN DX test November 7 & 8, 2020

(Source: KSEN via Facebook)

LAST MINUTE UPDATE: DX TEST – KSEN-1150 Shelby, Montana will test BOTH Saturday Morning Nov 7 AND Sunday Morning Nov 8 12:01 AM – 1:00 AM MST (0701-0800 UTC) with 10,000 watts on daytime pattern. Test will consist of voice announcements, Morse Code ID’s, sweep tones, off-hook telephone sounders, etc. The station has a small staff, so they have asked the CPC Committee to handle reception reports and verifications. Verifications will be by e-mail only. The CPC prefers audio recordings in .MP3 or .WAV format. These should be e-mailed to: [email protected]

Put this on your calendar, and don’t miss the chance to log a great station in Northern Montana. Thanks again to CE Todd Clark and Paul Walker for this great DX Test.

Spread the radio love

The new Raspberry Pi 400 All-In-One Keyboard PC Released

On Monday, I received the announcement about the new Raspberry Pi 400 via the Pi Hut.

The Pi 400 is essentially a Raspberry Pi 4 built into a keyboard. Wonderful concept that very much takes me back to my first personal computer.

Of course, in the spirit of all things Raspberry, the complete kit price is pretty reasonable at about $100 US. Here are details via Pi Hut:

The Pi400 has all of the great features of a Raspberry Pi 4 wrapped in a convenient and compact keyboard – it’s the ultimate coding machine!

The keyboard is available as a kit with everything you need in one box (minus a monitor), or on its own.

The Pi400 doesn’t compromise on performance either – in fact, the CPU is clocked to a whopping 1.8GHz which is made possible thanks to the large metal heatsink inside the keyboard.

CPU aside, the Pi400 boasts the same great specs and connectivity as a Raspberry Pi 4 – 4GB RAM, dual-band wireless networking, Gigabit Ethernet, dual-display output and 4K video playback.

USB, power, video, Ethernet and SD ports are located at the rear of the keyboard, including the familiar 40-pin GPIO connector.

The Raspberry Pi 400 is also available in a number of different regional variants (some international variants coming soon!).

Many thanks to SWLing Post contributor, Richard Langley, who shares the following Pi 400 review from Tom’s Hardware:

The Raspberry Pi Model B has seen the same board layout since the Raspberry Pi B+ arrived in 2014. Sure the Raspberry Pi 4 swapped the Ethernet and USB ports around, but the same basic design has persisted. So when we received a parcel from Raspberry Pi Trading and opened the box to find a keyboard, we were somewhat puzzled as to the contents. Inside this compact and well designed keyboard is a Raspberry Pi 400, a variant of the Raspberry Pi 4 4GB designed specifically for this purpose.

Retailing as a single unit for $70 or as a complete $100 kit with mouse, power supply, cables, micro SD card and a copy of the Raspberry Pi Beginner’s Guide, the Raspberry Pi 400 could be the ideal way to introduce the Raspberry Pi to your home.

[…]Despite the change in form factor, this is still a Raspberry Pi 4 4GB and, as such, it behaves in exactly the same manner, with one exception. The Raspberry Pi 400 lacks the CSI and DSI connectors, used for the Camera and Official Touchscreen. Without these connectors there is no way to use those devices. This loss of the touchscreen connector is not such a big deal, but the camera connector is.

The range of Raspberry Pi cameras are cheap and effective add-ons (see our list of best Raspberry Pi accessories) that provide a fun stream of projects. If you want to create camera projects, then the Raspberry Pi 400 is not for you.[…]

Click here to read the full review.

I normally scoop up new Raspberry Pi products as soon as they’re released, but I’m flush with RPi’s at the moment! I do believe, however, I’ll eventually replace out my daughters’ Pi 4s with these all-in-ones.

Spread the radio love

Icom IC-R30 new firmware (v 1.11) now available

Many thanks to SWLing Post contributor, Markku Koskinen, who shares the following:

Just letting you know that Icom has released new firmware for the IC-R30 receiver.

Please read carefully and follow all instructions:

https://www.icomjapan.com/support/firmware_driver/

Changes from version 1.10: Fixed the problem of when the ANL of the band that is not used is ON, while the Dualwatch function is OFF, the received DCR audio may not be output from the speaker.

This firmware is for the USA version that has a serial number beginning with “16”.

This firmware is for non-USA versions that have a serial number beginning with other than “16”.

Thank you for the tip, Markku!

Spread the radio love

Radio Waves: Future of Radio is Relevant, Hams Commemorate KDKA, Listen to the Globe, and Sangean EU Pre-Order for ATS-909X2

Radio Waves:  Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers.  To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Troy Riedel, Dennis Dura, Mike Hansgen, and Eckhard Hensel for the following tips:


The future of radio is real, relevant and multi-platform (Biz Community)

Exciting new technologies promise to make radio more accessible and engaging than it has ever been. This includes app-based platforms that enable broadcasters to engage with listeners like never before, software that lets producers edit sound as easily as a text document, and a ‘radio station in a bucket’ that turns a mobile phone onto a broadcast hub.
That’s according to radio futurologist James Cridland, who believes that while innovations like these point to a bright future for the over 100-year-old medium, it’ll take more than adopting cool new tech to succeed in the increasingly splintered and diverse arena that radio is evolving into.

“Radio is more than just AM and shortwave, more than big, old fashioned transmitters. Radio is a shared experience with a human connection,” he said during a recent webinar on the future of radio hosted by Fabrik, a South African-developed software platform for broadcasters and community groups.

“That shared experience is something that [streaming music service] Spotify can’t offer. It’s something that somebody’s CD player can’t offer,” he said, adding that this also applied to radio stations who just play non-stop music. “There’s no human connection there. There’s no real shared experience.”[…]

 

Radio Amateurs in Western Pennsylvania to Commemorate KDKA Broadcasting Centennial (ARRL News)

Pittsburgh radio station KDKA will celebrate 100 years of radio broadcasting in November, and Pennsylvania radio amateurs will honor that milestone in a multi-station special event. KDKA dates its broadcasting history to the airing of the Harding-Cox presidential results on November 2, 1920, and the station has been on the air ever since. The special event, which will involve the operation of four stations, will run through the entire month of November.

“More than 100 years ago, many experimenters started delving into a new technology known as wireless, or radio,” said Bob Bastone, WC3O, Radio Officer for the Skyview Radio Society in New Kensington, Pennsylvania. Bastone explained that many of those early pioneers were radio amateurs. “One hundred plus years later, many amateur radio operators are still contributing to wireless technology, while also serving their communities and enhancing international goodwill. Congratulations to KDKA Radio, also known in the early years as amateur radio stations 8XK, 8ZZ, and W8XK.”

Special event stations K3K, K3D, K3A, and W8XK will set up and operate at several locations in Pennsylvania during November. Stations will determine their own modes and schedules. Visit the W8XK profile on QRZ.com for information on certificates and QSLs.

What became KDKA initially began broadcasting in 1916 as amateur radio station 8XK, licensed by the Federal Radio Commission (FRC), the predecessor to the FCC. At the time, amateurs were not prohibited from broadcasting. The small station was operated by Dr. Frank Conrad, who was Westinghouse Electric and Manufacturing Company assistant chief engineer. The transmitter ran 75 W, and the broadcasts gained some popularity in Pittsburgh.

During World War I, amateur radio operation was suspended due to national security concerns. After the war, 8XK was reorganized as a commercial AM radio station, KDKA. The first transmissions of KDKA originated in a makeshift studio on the roof of Westinghouse K Building in East Pittsburgh.

Ham radio clubs participating in the centennial special event include the North Hills Amateur Radio Club in Pittsburgh — which is planning to operate from KDKA’s 1930s’ transmitter site, where an original tower pier still stands. A 1920s’ transmitter site, in Forest Hills, will serve as another operating location. In addition to the North Hills ARC and Skyview Radio Society, other clubs taking part include the Panther Amateur Radio Club, Steel City Amateur Radio Club, the Wireless Association of South Hills, the Butler County Amateur Radio Public Service Group, and the Washington Amateur Communications Radio Club.

Individual radio amateurs will operate from their own stations, and a small group of hams is planning a portable operation from South Park in suburban Pittsburgh.

Stations will invite the public to visit, while observing the required social distancing protocols.

“We amateur radio operators look forward to contacting thousands of other hams around the world to celebrate this huge milestone in the commercial broadcasting industry,” said Bastone. Contact him for more information. — Thanks to ARRL Public Information Officer and Allegheny County ARES Emergency Coordinator Bob Mente, NU3Q, for providing the information for this story.[]

Listen to the Globe (NY Times)

Radio programming from around the world is available on the internet or through apps.

Americans may not be able to travel the world because of the pandemic, but thousands of foreign radio stations are easily accessible online to bring the world to you.

For Dorothy Parvaz, a radio editor in Washington, D.C., foreign radio was her first introduction to the world beyond Tehran, where she lived until 12. “Listening to radio signals coming in from other countries was just like seeing the world in a way we couldn’t on TV, ” she said. “If I wanted to find music, I went to the apartment downstairs, where one of the kids always got a good signal somehow. We heard Pink Floyd for the first time together.”

Click here to continue reading noting that the NY Times might require a login to read the fll article.

Sangean ATS-909X2 once again available for preorder

Many thanks to Eckhard Hensel who notes that the ATS-909X2 is once again on the Sangean EU retailer site for pre-order. The price is €329.00 and they expect the product to ship in the first quarter of 2021.

Click here for details.

 


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

First look at the new Xiegu GSOC Touch Screen Transceiver Controller!

Yesterday, I took delivery of the new Xiegu GSOC Touch Screen Controller which has kindly been sent to me by Radioddity on loan for a frank evaluation. [Thank you, Radioddity!] GSOC development has been closely watched by Xiegu owners since its announcement this summer.

To be clear: the GSOC is not a transceiver, it’s a control head for the Xiegu G90 and X5105. Readers might recall my recent review of the Xiegu G90.

The Xiegu G90

I’ve heard some GSOC reviewers on YouTube note that the GSOC may also work with the tiny Xiegu G1M transceiver, but I’m not sure how it could convey the I/Q information since I don’t believe the G1M has I/Q output (perhaps someone can correct me as I’ve never used the G1M).

Connecting the GSOC to the G90 is a simple process:

  1. Remove the G90’s control head
  2. Use the supplied 9 pin serial cable to connect the GSOC to the G90
  3. Connect the G90 I/Q out to the GSOC I/Q in with the supplied 1/8″ (3.5mm) stereo patch cable
  4. Connect the G90 and the GSOC to a power supply or battery (each unit has a separate power connection)

The GSOC Sports a Large Touch Screen Interface

No doubt, the best thing about the GSOC is the 7 inch color touch LCD screen. It’s a capacitive touch screen as well, so feels more like a tablet screen than a soft pressure-sensitive screen.

While it doesn’t seem to have the pixel density of some modern tables, the resolution is more than adequate for the task and is, frankly, quite attractive!

The GSOC has a large encorder with a finger dimple that “floats” as you turn the the knob (much like my Icom IC-756 Pro).

This firmware version does have a number of adjustable settings for the GSOC and transceiver–all are easy to use.

A huge bonus is that the GSOC sports two USB ports. I’ve connected my portable wireless Logitech keyboard/trackpad to the GSOC via one of the USB ports and it works brilliantly.

I find it’s much easier to use a mouse or trackpad to click buttons on the screen as some buttons–especially the cluster below the frequency display–are tiny and a little more difficult to accurately click/select with a finger.

Form factor

The GSOC form factor works well for tabletop operation. There’s a fold-out bail that tilts the display forward for very easy operation. In fact, the GSOC bail must be used because it also acts as a stand-off to give the serial cable and IQ cable room to be connected. I prefer this rather than having all of the cables exit one side of the unit, for example.

When everything is connected, there are quite a few connections and cables in play:

  • Two power cords (G90 and GSOC)
  • Microphone
  • CW Key
  • Serial Cable
  • IQ cable
  • Antenna cable (for the G90 body)

If I owned a GSOC, I would sort out a way to manage the cables better and move the G90 body off of my table to save space.

One note: while the GSOC has a dedicated microphone port, it does not have a CW key port.  Your CW key still needs to be connected to the G90 body.

Notes

Keep in mind, all of these notes only pertain to the initial firmware version:

  • Startup time is about 29-30 seconds.
  • Many features such as CW/Voice memory keyers, CW reader/decoder, audio recording, auto notch filter, and many others have not been implemented yet but will be in the next firmware release according to the manufacturer.
  • The pointer arrow shows on the display regardless if you’re making selections with an attached mouse or your finger.
  • There’s a latency issue with the CW keyer in this firmware version which makes it difficult to form CW characters properly so I can’t test CW functionality. I understand this will be fixed in the next firmware version.
  • I’ve noticed some images across the spectrum display (most notably on 31 and 20 meters. I believe this may be due to the I/Q signal being a little too “hot.” I’m not sure if there’s a way to adjust this with the current firmware.

At time of posting, there’s very little in the way of a manual for this radio. It was shipped to me with this quick operation guide (PDF).

Price

The GSOC retails for $550 US via Radioddity–which is more than the G90 transceiver (currently $430).

If you’re a fan of the G90 or the X5105, though, it makes for an attractive and useful addition in the shack. It not only adds features to the G90, but even an FM mode.  While the GSOC is certainly portable, I’m not sure I’d take it to the field often because it would require extra setup time, bulk and weight. In an extended field event like Field Day or a park vacation, it might be worth the extra weight and space as it will soon give you programmable voice and CW memory keying.

What I find most interesting about the GSOC, in fact, is that it’s a case in point about how our radio world is moving into a “modular” area where components like the transceiver, amplifier, and panadapter/controller can be swapped out.

Any questions?

The Xiegu GSOC is following in the footsteps of other rado products out of China these days in that they’re initially released with a basic set of features to get you on the air, but advanced features and adjustments/tweaks are made in firmware upgrades after production. Based on the success of the G90 and Xiegu’s attention to customer feedback, I assume many of the missing features will be added soon. I’ll take a deeper dive into the GSOC in the coming days and certainly note when firmware upgrades have been made.

If you have any questions about the GSOC feel free to ask in the comments section of this post. I’ll do my best to answer, but keep in mind I’m pretty much learning the ropes here without a manual!


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Channel 292 testing new antenna on 9670 kHz

Many thanks to SWLing Post contributor, Harald Kuhl, who shares the following note from Channel 292:

Maybe you already noticed on our homepage, that we try to start using
our new beam on 9670 kHz, which will increase the radiated power to the
target area by more than ten times.

Tests transmissions start today; we are grateful for every reception
report you will send. We change the target area every 15 minutes, so it would
be very helpful, if you could monitor for two hours, when all target areas
would have been covered.

Thanks for the tip, Harald!

Listeners, please send reception reports to Channel 292: [email protected]

Spread the radio love

FTIOM & UBMP, November 8-14


From the Isle of Music, November 8-14:

This week, a dance party with music by Original de Manzanillo and Ritmo Oriental.
The broadcasts take place:
1. For Eastern Europe but audible well beyond the target area in most of the Eastern Hemisphere (including parts of East Asia and Oceania) with 100Kw, Sunday 1500-1600 UTC on SpaceLine, 9400 KHz, from Sofia, Bulgaria (1800-1900 MSK)
2. For the Americas and parts of Europe, Tuesday 0100-0200 (NEW UTC) on WBCQ, 7490 kHz from Monticello, ME, USA (Monday 8-9PM EDT in the US).
3 & 4. For Europe and sometimes beyond, Tuesday 1900-2000 UTC and Saturday 1300-1400 (NEW UTC) on Channel 292, 6070 kHz from Rohrbach, Germany.
Our Facebook page is https://www.facebook.com/fromtheisleofmusic/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Uncle Bill’s Melting Pot, November 8, 10 and 14:
This week we enjoy music from Ghana.
The transmissions take place:
1.Sunday 2300-0000 (6:00PM -7:00PM EDT) on WBCQ The Planet 7490 kHz from the US to the Americas and parts of Europe
2. Tuesday 2000-2100 UTC on Channel 292, 6070 kHz from Rohrbach, Germany for Europe.
3. Saturday 0800-0900 UTC on Channel 292, 9670 kHz from Rohrbach, Germany for Europe.
Our Facebook page is https://www.facebook.com/UncleBillsMeltingPot/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

 

Spread the radio love