Monthly Archives: June 2021

Guest Post: Dikeside Icom IC-705 RX action

Many thanks to SWLing Post contributor, 13dka, who shares the following guest post:


The IC-705 in action at the dike

by 13dka

When I got the IC-705 in late October 2020, I didn’t get that much chance to enjoy it at the dike: After a couple of initial tests and 2 nightly “FYBO” MW DX sessions in November, a way too long and wet winter struck the German North Sea coast, with nighttime temperatures recovering to 2-digit Celsius figures only in the past few weeks. I took the opportunity to do more experiments with loops, preamps and a phasing unit to improve the RFI-stricken reception at home, so I could at least listen to European hams on 80 and 40m raving about their new 705s and start to write my own musings about that lovely little radio, recently posted here.

SSB DX

June 1st, 202

Finally, acceptable temperatures at night! But they come with a downside: When I connected the vertical around 8:00pm (local time), it was still almost 2 hours before sunset and a lot of thunderstorms in Europe made even 14 MHz very noisy, my hopes for some nice catches were immediately taking a dive. A short scan of the bands brought up nothing special, the only notable thing being the CB and 10m bands being moderately open. I should’ve known better: As soon as the sun splashed into the ocean, grayline propagation worked its magic!

Grayline while receiving Japan, June 1st

As the image probably hints, a couple of Japanese “big guns” produced some nice, comfy signals on the monopole, in addition to the South American and Carribbean stations usually booming in here!

Video: A short collection of ham stations heard around midnight

After midnight I noticed a residue signal of WWV on 20 MHz and still a few EU beacons on 10m. Both incredibly weak with QSB making them disappear but that’s where the 705 really shines – it’s not only picking up these grassroots signals just fine, it shows me that they’re there, or that they were there – a waterfall display keeps on proving that a perceived lack of activity on a band is often pure bad luck – you can tune across an entire band without hearing anything because on each frequency with some activity there’s the other (inaudible to you) station speaking right now, QSB is dipping the signal just when you tune past it…

June 5/6, 2021

That evening the Japanese stations were missing on 20m, I thought I picked one up on 17m, and like so often, the one odd Australian station came in on 20m. After midnight I noticed the 10m beacons again, there were even a few more of them. This time I brought my Belka DSP to the dike so I could compare it with the IC-705, after all the Belka proved to be my most sensitive portable before! The devastating result is likely owed to the fact that the Belka is pretty picky about passive antennas not being matched very well to its input (which is much optimized for the whip) but it picked up diddly squat. If it isn’t a testimony for the sensitivity of the IC-705, it might be one for its aptitude to cope with all sorts of antennas.

Then I tuned into the 10m SSB range and I was veeeery surprised to hear VO1FOG from St. Johns, Canada! This is the first time I heard a transatlantic signal on 10m in a solar minimum ever, but it was with condx only elevated enough for some daytime DX within the EU…and literally in the middle of the night! The signal was very unstable though, he later switched to the 12m band which worked better. Back to what I said about the waterfall display above: Without it, I could’ve missed this station with a pretty high probability simply because I didn’t expect any activity up there, so I wouldn’t have tuned across that band for very long, and without seeing the signal while the VFO is already somewhere else…

I also heard another new country (Ecuador) in SSB, the usual collection of Carribbean islands and some participants of the “Museum Ships Weekend Event” including NI6IW, which is the vanity call of the history-charged USS Midway in San Diego. The “Japanese” station JW4GUA turned out to be on Svalbard island, with the main town Longyearbyen being the northernmost town in the world, only 650 miles from the north pole, and I don’t hear stations from there very often!

Video: June 5th

June 10/11

The past days saw the SFI passing 80 and 11/10m becoming quite busy. By the time I parked the car at the dike, SFI had dropped to 73. That evening the grayline confined itself to colorizing the horizon. 10m and 11m were still full of signals, I could still hear 2 British chaps chatting on 27 MHz at 3:00 in the morning, but nothing really “extraordinary” was coming in – the one odd VK, more Carribbean islands, one Argentinian but not much from other parts of South America, it never gets boring how this all defies predictability. But as always I heard most of the North American continent, not booming in much that night but I followed 2 POTA activations for a while, which are usually at most 100W stations working a lot of other “barefoot” stations and I heard almost all of them. In the morning grayline window for the west coast I finally got one solid signal from Oregon. All my radio life, the US west coast has been a tough target for some reason.

The signal had that typical “over the pole” sound, a relatively quick phasing imprinted into the signal by the charged particles converging over the pole, causing northern lights in the region and that exiting feeling when observing really big, planetary scale physics in realtime, over here at my listening post. The magic of shortwave. 🙂

Broadcast bands

After the post touting the IC-705 as a SWL/BCL receiver, demonstrating it on the broadcast bands seems mandatory to me. However, capturing cool BC DX is a very different business than waiting on the ham bands for interesting stations coming and going and collecting spectacular (-ish) results in a single night this way. Broadcast schedules have to be studied, current “hardcore” DX targets identified… and I have to admit that I’m out of that loop currently. Just turning the knob and recording whatever is populating the bands, and doing that between 21-22:00 UTC, when all programs are directed towards anywhere except Europe turned out to yield pretty boring results. Here it goes anyway:

Video: Browsing the most important BC bands

CONDX and antenna:

The antenna I was using in these videos was a simple wire running up a 10m/33′ fiberglass pole, forming a very archetypical “monopole” or “Marconi” antenna, just a vertical wire, no counterpoise, no matching network, no un-un, transformer or flux capacitor. I planned on using this to make some experiments about the practical benefits (for reception) of all the components it’s now lacking, but it already demonstrates that the beauty of receive-only antennas is that they often don’t require crazy efforts: On the conductive soil at the dike it works pretty well (good signals all over the bands and sufficiently low takeoff angle) as it is.

The evening and the 2 full nights at the dike once again had condx that nobody would phone home about:

SFI, A and 3-hourly K-indices while I was at the dike.

It’s not that these numbers always fully explain actual and current condx but decreasing SFI and rising A/K-indices mean low expectations. Despite the condx still characterized by the solar minimum that way, the location is always delivering proper DX for my radios. Unless stormy or severely unsettled geomagnetic conditions give DX a day off, there’s almost always something to take home, be it a new country, a rare island, unexpectedly loud signals from the other end of the planet at unusual times and/or on unusual bands or other ionospheric mysteries.

Speaking of location: These videos demonstrate the properties of that listening post as much as the capability of the IC-705 to harvest them, and they don’t put that into relation to other radios, so you have to rely on my word on this: Compared to what I brought to that place so far it’s jaw-droppingly good, but a big contributor to that is that only few of my other radios can really cope with the antennas I like to use out there in first place. A radio like the IC-705 is sure making the most out of location and antenna, but it’s not the key component because a low-noise location is everything, it always was and it is today more than ever. Without it, radios and antennas can’t really play their jokers.

Spread the radio love

Dan spots a number of radios in the Netflix series “Sweet Tooth”

Many thanks to SWLing Post contributor, Dan Van Hoy (VR2HF), who notes that he spotted a number of radios including the Kenwood TS-930S in the new Netflix series, Sweet Tooth (see above). He writes:

[Also] seen in the last minutes of the final episode of season one: An AWA (Amalgamated Wireless Australasia) Teleradio Model 110H HF SSB transceiver.

Interesting history about AWA:

[Also spotted] test equipment plus all kinds of other gadgets in the zoo sanctuary.

Very cool–thank you for sharing this, Dan! That Teleradio Model 110 looks like a fascinating set! I’ve never seen one before.

Spread the radio love

More Comb Stereo Broadcasts via Radio Gum Tree June 18 & 25, 2021

Many thanks to SWLing Post contributor, TomL, who notes:

Episode 2 of Radio Gum Tree will be rebroadcast this coming Friday night June 18, 2021 at 9:45 EDT on on 5850 kHz in case anyone missed it. Episode 3 should be on June 25.

You can find the program notes for these Test broadcasts at this web site address. I will not be archiving the broadcast on the internet due to music copyright concerns.

www.radiogumtree.com/?p=54

Many thanks for putting together this Comb Stereo series, TomL!

For more information, check out TomL’s initial announcement.

Spread the radio love

Pre-Detection Recordings: Any in existence, declassified and accessible–?

Many thanks to SWLing Post contributor, Chip, who writes:

I remember reading a number of years ago that the NRO/NSA was the largest consumer of magnetic tape, utilized for pre-detection recordings of various spans of spectrum, all over the world.

I’m wondering if those tapes become declassified at some point, and if they are available through FOIA requests. Were they just bulk erased, destroyed or sold at GSA auction along the way.

Do you know if anyone has ever queried into their existence, and if they have been electronically preserved to some other digital medium?

The idea that our government records huge chunks of spectrum, fuels thoughts in my mind of huge spans of non-classified spectrum from across the years. All the DX shortwave outlets captured for posterity.

Thank you for sharing this note, Chip.

Of course, I’ve always been interested in adding recordings like this to the Radio Spectrum Archive. If these recordings exist, I would love to see them added to the Internet Archive–who stores Radio Spectrum Archive recordings– so that they could be shared and enjoyed by all.

Post readers: If you have any information on this, please comment!

Spread the radio love

KFOG broadcasts on June 20th and 26th, 2021 via Channel 292

Many thanks to SWLing Post contributor, Pete Madtone, who shares the following:


KFOG takes to the high seas via Channel 292 on Sunday June 20th 2021 at 1200 UTC (11am UK time) and on Saturday June 26th at 0900 utc (8am UK time) on 6070 kHz. Expect tunes in a nautical style and “see the glimmer from a distant lighthouse, as the buoys ding and the (radio) waves crash onto the rocky shore. This is music from the mist!” as they say at KFOG HQ.

Expect a mix from One Deck Pete called “A mix from across the Pond” with tunes from Kiyoko, Honeychild & DJ Olive, BOATS, Robert Mellin and The Congo’s. Grab yourself a lifejacket and a shortwave radio and tune in. If the shortwave radio is a problem tune in here at the alloted time. If you haven’t a lifejacket we’re sorry but we can’t help you with that!

Spread the radio love

A Super-Charged Solar Cycle 25?!

There’s an interesting post from spaceweather.com about two scientists who believe they have found evidence of solar activity which might indicate a super-cycle rivaling the best solar cycles ever recorded. (I, for one, would be thrilled for this since the last such super-cycle seems to have been before I was born, and that was a real long time ago!)

Here’s the link to the article at spaceweather.com:

The Termination Event

73,Robert

Robert Gulley, K4PKM (formerly AK3Q), is the author of this post and a regular contributor to the SWLing Post. 

Spread the radio love

Dan reviews latest firmware version of the Tecsun PL-368 and shares list of hidden features

Many thanks to SWLing Post contributor, Dan Robinson, who shares the following guest post:


Revisiting the Tecsun PL-368:  Assessing a Later Firmware Unit

by Dan Robinson

This past April, I reviewed Tecsun’s PL-368, the update of the PL-365 (also sold by CountyComm as the GP5).  There were some major changes:  Tecsun shifted from AA batteries to a flat BL-5C cellphone type battery, and of course the marquee design change was the addition of a keypad.

The keypad is a night and day change – whereas before the PL-365 was a handy receiver but hobbled by archaic tuning limited to memory access and the side thumb wheel, the 368 provides easy instant frequency selection.

In my previous review, I mentioned the well-known characteristic of the 360 and 365 models which exhibited over-sensitivity to the touch.  When removing your hand, signal levels plummeted – usually, a full grip was necessary and any variation caused reduced sensitivity – noticed mostly in shortwave mode.

The PL-368 I reviewed was from among the first versions of the receiver.  It had a firmware of 3681, from a 2020 production run.  Recently, I received from Anon-Co – the most reliable supplier of Tecsun receivers – an updated unit, with firmware 3684.

Please see my previous review for comments on various aspects of the 368: the longer but less robust telescopic antenna, addition of detents on the volume wheel, and the welcome addition of adjustable bandwidths, synchronous detection, and ability to tune in 10 hz increments, and other changes.

PROBLEMS

SYNCHRONOUS DETECTION:  As with the 909x and H-501, the upgraded 368 now has Synchronous Detection.  I did not expect any change in the 3684 firmware – SYNC still has some distortion and loss of lock.

As with the 330, 990x, and 501x successful use of this mode requires a delicate dance involving careful selection of various bandwidths while in SYNC mode and fine tuning.

However, whereas on the previous 3681 unit there was significant “warbling” when in SSB and SYNC, and phonics when touching the keypad, the 3684 unit has little to no such warbling and the phonics appear to be gone, or minimized.

It’s not known what Tecsun may have done to address these issues – my review of a previous 3681 firmware unit was published in April, so it’s hard to think that Tecsun made any major physical changes to the PCB/keypad and radio body.  But there does seem to be some improvement.

I had no expectation that a firmware change would result in any improvement in the other major issue common to the 360 series – reduction of sensitivity when the receiver is not being held in the hand.

The 368 still shows a noticeable reduction in signal strength, visible on the display, when left standing on its own versus being fully gripped.  But the problem does not seem to be as serious as it was with the PL-360/365.

And since my first review of the 368, I have done some additional comparisons with older portables which were constructed with more robust cabinets.  Some of those also exhibited reduced sensitivity when not being held.

For the PL-368 with firmware 3684, the headline really has to be the apparent disappearance of the “phonics” when tapping the keypad and cabinet top surface.  This was the elephant in the room on the first very early sample of the PL-368.

While there is still distortion using SYNC mode, this issue seems to have been slightly reduced with the latest firmware.  Without confirmation by Tecsun, there is no way to know what specifically may have been done to impact the SYNC issue in a positive direction.

A major disappointment is confirmation from Anon-Co via Tecsun that the re-calibration function seen in the PL-330, 990x and H-501x is absent from the PL-368.

That leaves a user with only the fine tuning option in SSB.  This is a real puzzler, since surely Tecsun could have enabled re-calibration on the 368 in the same way it did with the other receivers.

SUMMARY

I stated in my first review of the 368 that this receiver would be an automatic must-buy in my book, were it not for the earlier issues of cabinet phonics and signal level reduction when the radio isn’t being fully gripped in hand.

One hopes that the phonics issue has been fully addressed by Tecsun.  It’s possible that my initial early unit of the 368 had some weakness in the PCB for the keypad, and LCD display that has been recognized and corrected.

Without confirmation from Tecsun, it’s also difficult to declare that the 3684 firmware has truly brought about a measurable improvement in SYNC and SSB.  But based on my testing of this particular 3684 firmware unit, the radio is more usable and tolerable in SYNC and SSB.

And of course, addition of the keypad along with multi-bandwidth options moves the 368 firmly into the same zone as Tecsun’s other portables, albeit perhaps more in the “prepper” category.

There are so many offerings now from Tecsun in portables that it’s hard for me to place the PL-368 in the “must-buy” category, especially since the PL-330, 990x and H-501x bring so many superb features to the game.

But the PL-368 has a certain appeal – its walkie-talkie style design makes it an easy quick-grab for trips, similar to the PL-330, though the 368 can not really be safely balanced on a flat surface and is best used with some kind of stand.

In terms of raw performance, one has to observe that the wonderful Belka DX has to be considered as a top choice and major competition when it comes to extreme portability and top performance, especially with the available speaker/battery backs.

And the PL-368 still has major competition from the XHDATA D-808 (now appearing under the RADIWOW SIHUADON label) with excellent AIR band capability and multiple bandwidths, though no synchronous detection.

To “save” the PL-36xx series, Tecsun will have to ensure steady QC (quality control) in manufacturing and when possible, further firmware updates of the 368, as with all Tecsun receivers.


Preliminary List of Hidden Features for PL-368

Source: Anna at Anon-Co

Switch between internal ferrite rod and whip on AM (MW & LW)

1. Select the MW or LW band.
2. Press and hold key ‘3’ for about 2 seconds.

When the display briefly shows “CH-5” this means that the device is set to MW/LW reception using the telescopic antenna. The display shows MW (or LW) and SW on the left side of the screen.

When the display briefly shows “CH-A” this means that the device is set to MW/LW reception using the internal ferrite antenna. The display shows only MW (or LW) on the left side of the screen.

Adjusting the maximum volume level

Select the frequency band, then press and hold key ‘7’ for 2 seconds until a number is displayed. At this moment, rotate the [ TUNING ] knob to adjust and press the key ‘7’ again to save and exit.

Firmware Version

In power-off mode, press and hold [ VF/VM ] for 0.5 seconds until all characters on the display are shown, then wait a few seconds until the firmware version is briefly displayed at upper right of the display.

Extend SW-range for European setting (1621-29999 kHz)

1. In power-off mode, press and hold the [ 3 ] key to set the MW tuning steps to 9kHz.
2. Select the SW band, and then press and hold the [ 5 ] key for 10 seconds to enable/disable the SW frequency extension.

The starting point of the SW frequency range will become 1621 or 1711 kHz.

Spread the radio love