Category Archives: Shortwave Radio

The new Degen DE1129A sports RDS, but is there really a version with keypad?

Thanks to a tip from the Herculodge, I discovered the DE1129A: a version of the recently reviewed Degen DE1129 with RDS. RDS is a very useful feature–especially for instant FM station ID on the go.

The DE1129A is available from Anon, a trusted Degen distributor from Hong Kong, on eBay. I have purchased from them before and have been very pleased with their service. Click here to view their listings.

If you’ve been sitting on the fence about purchasing the DE1129, perhaps RDS will sway you toward purchasing this portable radio with integrated digital recording and playback.

Frankly, I was unimpressed by the DE1129. Though the radio has very good FM reception and an impressive little speaker with bass response, I believe the majority of shortwave and medium wave radio listeners would be upset with its overall performance. I can’t imagine that Degen’s updates would bring dramatically improved performance on the shortwave and mediumwave bands. If nothing else, the lack of a number pad to directly input frequencies, would put me off. Cruising through the shortwave bands at slow 5kHz steps with noted muting between frequencies make band-scanning a chore on the DE1129.

According to TecsunRadio.com, this image was altered by Degen to show what the DE1129 would look like with a number pad. It’s obvious that the image has been altered by Photoshop or another graphics application.

DE1129 Number Keypad?

Speaking of a number pad…earlier this year, TecsunRadio.com told me that there would soon be a version of the DE1129 with a number keypad. They published a prototype image (see right). When I first saw this image, I could instantly see that it had been Photoshopped; obvious use of cloning tools and the fact that the number pad characters are not in alignment with the buttons really stand out. Still, for a prototype image, it gives you a good sense of what the final product will look like.

Within weeks, I started noticing the keypad version of the DE1129 appearing in search results on eBay and had assumed it was in production.

This eBay seller shows a version of the DE1129 with number pad, but the image is the Photoshopped image (see above) released from Degen earlier this year.

This morning, I opened an eBay listing of the DE1129 keypad version (see image on right) from pbuying.usa. Their listing clearly shows the same Photoshopped image from above. I then noticed that neither the product description nor any other image they feature indicates a number pad on the DE1129. I wrote a message to them this morning asking for clarification and will update this post with their response.

UPDATE: pbuying.usa confirmed that his radio does not have a number pad and was apologetic and thankful that it was pointed out. The image has been removed.

I mention this as a note of caution: On eBay, you should always confirm any discrepencies before purchasing. Though you could rightfully return the radio and get a refund, return shipping to Hong Kong/China (which you would pay for) could be in excess of $20-25 US.

By the way, though the addition of a number keypad on the DE1129 would make this radio at least 50% more usable, it would not sway me to recommend it because receiver performance is so mediocre. Check out my other review notes here.

I’m very curious if any SWLing Post readers have actually received a keypad version of the DE1129–please comment!

Mike’s solution for sticky radios

40 Replies

Many shortwave radios, such as those manufactured by Grundig/Eton, have been produced with a rubberized coating that makes the radio easier to hold in the hand. I like this coating because it gives me a sure grip on the radio.

However, over time (say, two to three years) the coating can break down and begin to produce a sticky residue. All of a sudden your “grippy” coating feels more like tacky paint–even leaving a bit of residue on anything it touches.

Many models have this coating: The Grudig G5 and G3, The Eton E1, E1-XM, FR350, FR400, FR500 and FR600, to name a few.

Michael Kitchen (KD5PXH) recently wrote with his solution for sticky radios:

After experementing with cotton balls/pads, and using window cleaner and other liquid agents, I managed to decently remove the gummy coating from an Eton FR-400.

Best to use 91% Isopropyl Alcohol, and a clean but disposable (dry) wash cloth or something similar.

The stronger percentage alcohol makes for easier breaking down of the sticky, and the wash cloth to remove, without damaging the surface or removing lettering. The trick is to always use clean spot on wash cloth, keep from just smearing the stickyness around. The wash cloth will lift and absorb sticky, so keep using a clean spot on cloth. The cloth needs only be damp with alcohol, not dripping wet. Use dry spot on cloth to wipe clean the surface.

There may be a hazy white patina, but much of this can be wiped away.

It takes a little bit of effort, but the results are worth while.

Thank, Mike!

Senator Segal’s motion receives unanimous vote: special committee enquiry into RCI cuts

1 Reply

An excellent development in Canada: Senator Hugh Segal’s motion for a special committee enquiry into the CBC decision to slash the Radio Canada International budget by 80 per cent has received a unanimous vote in the Senate. Committee hearings will begin as early as February.

Below is the full press release I received from Senator Segal:

(Source: Office of Senator Segal)

Senator Hugh Segal has issued this statement on the unanimous vote in the Senate to have a special committee enquiry into the CBC decision to slash the RCI budget by 80 per cent.

“I am delighted that, in a non partisan way, the Senate voted to have the RCI matter go to a full review of the Standing Senate Committee on Transport and Communications. My motion was amended by Senator Champagne to go to a full committee hearing rather than a one day appearance before bar of the Senate.

That a ten percent cut to the CBC budget produced an 80 percent slash and burn of Radio Canada International reflects an internal CBC management decision which needs to be better understood. CBC management may well believe that if they let people go and dismantle transmitters, the problem will go away.

The importance of Canada’s voice to the rest of the world is not a detail of no consequence. The chance to call witnesses, pursue how other enlightened countries have expanded their short wave capacity, among other facts, will be a constructive step ahead in strengthening Canada’s international voice.”

Committee hearings on this matter may start as early as February2013.

Radio Australia: Saturday Night Country mixes in holiday music

More shortwave digital text (and the reason behind it)

Leave a reply

Screenshot of digital mode being selected in FLDIGI. Click image to enlarge.

SWLing Post readers have seen previous posts regarding text being broadcast via shortwave digital modes on WBCQ, WRMI and The Mighty KBC (which broadcasts again this weekend).

Recently, Kim Elliott explained his mission behind these digital tests. Not only do I agree, but I support him completely. Why? It’s proof that the shortwave spectrum is an excellent medium to transmit digital information across the globe. Decoding requires a very basic shortwave radio, some free software and a computer. I believe, in the near future, there will be a smart phone app that can handle this with ease–it simply needs a developer (hint, hint).

Here is Kim Elliott’s post on the topic–I have emphasized points in bold:

Radio amateurs use several modes to transmit text via shortwave. It occurred to me that text via shortwave might be a workaround whe[r]e the internet is not available because of disasters, dictators, or other causes.

I have not yet convinced any major international broadcasters to let me test this hypothesis on their (remaining) shortwave transmitters. However, the Netherlands-based Mighty KBC has kindly been allowing me two one-minute segments during their broadcast to North America at 0000 to 0200 UTC on 9450 kHz. This is via leased time on a transmitter in Bulgaria.

Reception of text via shortwave is possible on an inexpensive shortwave radio, even one without single sideband (SSB) capability. The audio is patched into a PC that does not have to be especially powerful. This involves a patch cord from the earphone jack of the radio to the microphone input of the PC. If there is no patch cord, placing the radio’s speaker near the built-in microphone of a laptop might work.

Software for decoding the text should be installed in the PC. There are several available to radio amateurs, including DM780, MixW, and MultiPSK. Especially popular these days is Fldigi. This is available from www.w1hkj.com. While you are there, please also download Flmsg, because it will be needed for this weekend’s test on KBC. [Note: This software is free and open source.]

This weekend’s test on KBC will feature the MT63 modes with long interleave. After Fldigi is installed, go to Configure > Modems > MT-63 > check 64-bit (long) interleave, 8-bit extended characters, and Allow manual tuning. Also, go to Configure > Misc > NBEMS > check Open with flmsg and Open in browser and, below that, indicate where your flmsg.exe file is located.

The first KBC text transmission will be around 0130 UTC Sunday (Saturday evening 8:30 pm EST). The MT63-1000 mode with long interleave will be centered at 1000 Hz on the waterfall visible on the software display. PSKR125 will be cenetered at 2200 Hz. Decode one while listening, and decode the other from your recording of the transmission.

The second text transmission will be just before 0200 UTC Sunday (9 pm Saturday EST). This will be MT63-2000 centered at 1500 Hz. This message will be formatted for Flmsg. If all goes well, the shortwave transmitter in Bulgaria will open a new window of Flmsg and then open a new window of your web browser with formatted content, in color no less.

One week after my first text transmissions (11 November) on KBC, Arnie Coro at Radio Havana Cuba began transmitting digital text modes on his Dxers Unlimited program (in English). He might do so again this weekend. The schedule for DXers Unlimited can be found at the World of Radio website (where all times and days are UTC, so those UT Monday transmissions are actually Sunday evening in North America).

More discussion of the concept of digital text via analog shortwave broadcast is in Kim’s December 2012 column (pdf) for the North American Shortwave Asociation.

Shortwave Radio Recordings: Voice of Greece music

Universal Radio features Grundig S450DXL deal and new catalog

2 Replies

Universal Radio has started a special deal-of-the-week on their home page. They’re featuring the Grundig S450DLX as their first deal.

At $88.77 US and including the book, “Discover DXing,” this is an excellent gift idea (indeed, we featured this radio in our 2011 gift guide).

I also just received the following news from Universal Radio:

[We’re] pleased to report that our new 2012 print catalog should arrive tomorrow night.

It is our largest print catalog ever, at 132 pages.
We have also (for the first time) made it available as a download (by-chapter) at:

http://www.universal-radio.com/catalog.html

Universal Radio’s catalogs are the only catalogs I keep archives of. They’re great for referencing current production radios and accessories, and later can serve as a resource when researching used prices (another excellent tool is their sold/used item index).