A little offline and on-radio time!

For the next week or so, I’m going to have limited Internet service, but lots of radio time. I’m looking forward to it!

There shouldn’t be an interruption here on the SWLing Post, but I will not have a lot of time to reply to questions via email. Feel free to continue sending your tips, articles, and stories, but if you have in-depth questions, it could take me a couple or more weeks to get back to you as I’m pretty sure my email will stack up during this time.

It’s ironic, but this crazy “Social DXing” year has provided me the opportunity to review and evaluate more gear than I ever have in one calendar year. On the flip side, I’ve been so busy doing evaluations that I’ve had less time to enjoy pure SWLing fun. I’m looking forward to fixing that this week!

If you have a radio related question, I’d encourage you to post it in the comments section of a related post (or even this post). We’ve an active community of radio enthusiasts here who are incredibly helpful.

Cheers & Happy Listening!

Thomas

Spread the radio love

David shares a recording of the RTE longwave interval signal

Many thanks to SWLing Post contributor, David Shannon, who writes:

Hi Thomas

A little treat for my fellow readers of your blog (is that the right word?). The RTE interval signal, a rendition of O’Donnell Abú (“O’Donnell Forever”), that is played at 0529 daily, apart from the weekend when it’s played at 0629 (even interval signals need a lie in) and received on longwave here in Scotland.

I know that longwave broadcasting is a very European thing with the exception of the likes of Mongolia (holy grail stuff for me) but it’s where my fascination for the bands started way back in 1978/9.

Sláinte mhaith gach duine
(Irish Gaelic for good health everyone)

That’s a beautiful interval signal, David. Thank you so much for sharing it with your fellow Post readers! There are few things in this world that make me feel more nostalgic than an off-air recording of an interval signal. Go Raibh Maith Agat!

Spread the radio love

FTIOM & UBMP, December 6-12, 2020

From the Isle of Music, December 6-12:
This week, special guest Toni Basanta returns to share music from Expreso Rítmico and Grupo Los Yoyi, two popular dance bands in Cuba in the 1970-1980s, with us.
The broadcasts take place:
1. For Eastern Europe but audible well beyond the target area in most of the Eastern Hemisphere (including parts of East Asia and Oceania) with 100Kw, Sunday 1500-1600 UTC on SpaceLine, 9400 KHz, from Sofia, Bulgaria (1800-1900 MSK)
If you don’t have a shortwave radio or are out of range, you can listen live to an uplink from a listening radio in the Netherlands during the broadcast at
http://websdr.ewi.utwente.nl:8901/?tune=9400am
2. For the Americas and parts of Europe, Tuesday 0100-0200 on WBCQ, 7490 kHz from Monticello, ME, USA (Monday 8-9PM EST in the US).
If you don’t have a shortwave or are out of range, you can listen to a live stream from the WBCQ website here: http://splatterbox.us/wbcq1
3 & 4. For Europe and sometimes beyond, Tuesday 1900-2000 UTC and Saturday 1300-1400 UTC on Channel 292, 6070 kHz from Rohrbach, Germany.
If you don’t have a shortwave radio or are out of range, you can listen live to uplinks from various websdrs in Europe.
Our Facebook page is https://www.facebook.com/fromtheisleofmusic/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Uncle Bill’s Melting Pot, December 6-12:
In episode 194, we listen to music from Norway.
The transmissions take place:
1.Sunday 2300-0000 (6:00PM -7:00PM EST) on WBCQ The Planet 7490 kHz from the US to the Americas and parts of Europe
If you don’t have a shortwave or are out of range, you can listen to a live stream from the WBCQ website here: http://splatterbox.us/wbcq1
2. Tuesday 2000-2100 UTC on Channel 292, 6070 kHz from Rohrbach, Germany for Europe.
3. Saturday 0800-0900 UTC on Channel 292, 9670 kHz from Rohrbach, Germany for Europe.
Our Facebook page is https://www.facebook.com/UncleBillsMeltingPot/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Spread the radio love

Review Notes: Xiegu GSOC Firmware updated to version 1.1–still a number of issues

For those of you who have been asking about the new Xiegu GSOC controller, I just updated my unit with the latest firmware (version 1.1).

Firmware notes show that it addresses the following items:

Xiegu GSOC FW V1.1
1. Solved the CW sidetone delay problem
2. Solved the problem of unstable system and occasional crash
3. Added RTTY modem
4. Added CW decoder
5. Added SWR scanner
6. Added FFT/Waterfall level adjustment
7. Added FFT line/fill color mixer

The list above was copied directly from the version notes.

I’m currently evaluating the GSOC/G90 pair which were kindly sent to me on loan by Radioddity. I upgraded the GSOC firmware to v1.1 this weekend.

What follows are some of my evaluation notes an observations after performing the upgrade.

Updating firmware

Updating the GSOC firmware is a pretty straight-forward process.

First you must download the GSOC firmware package (about 330 MB!) which includes a disk image and application to flash the image to a MicroSD card.

Yes, you’ll need a dedicated MicroSD card to upgrade the GSOC firmware–meaning, you can’t simply use a MicroSD card with data on it you’d like to keep because the process of flashing the ISO file also includes a full format with multiple partitions.

You’ll also need an SD Card reader/writer if your Windows PC doesn’t include one.

The included firmware application/tool makes it quite easy to flash a disk image on the MicroSD card.

After the MicroSD card has been prepared, simply turn off the GSOC, insert the MicroSD card on the left side of the GSOC, turn it back on and the GSOC will automatically boot from the MicroSD card and install the new OS/firmware.

Once the upgrade has completed, the GSOC will turn itself off and you must remove the MicroSD card.

If you want to restore the MicroSD card to one partition, you’ll need to perform another format and shrink the volumes.

CW sidetone latency (still issues)

After performing the upgrade, I hopped on the air and tried to make a few CW contacts since I noted in the version notes that the CW sidetone latency had been addressed. So far, my evaluation has pretty much been on hold because I’m unable to use CW mode with any sense of sending accuracy.

Unfortunately, I’m still finding that there’s still a bit of sidetone latency or keyer timing interfering with my ability to correctly send words and letters.

To my ear, it sounds like there’s much less latency in the sidetone audio now (compared with v1.0 which was a little insane) but I still struggle sending characters that end in a string of dits or dashes. For example, when I try to send a “D” the radio will often produce a “B” by adding one extra dit. Or if I try to send a “W” it might produce a “J”. I know something is a little bit off because I botched up two CW contacts with POTA stations yesterday as I tried to send my own callsign correctly.  And “73” was even problematic.

I’m guessing that there may still be a bit of audio lag between the G90 body (where the CW key is plugged in) and the GSOC (where the sidetone audio comes out). At the end of the day, the keying information must be sent to the GSOC from the G90 transceiver body and I assume the processor on the G90 is causing a bit of audio latency. Hopefully, Xiegu can sort this out. It’s a serious issue for anyone who wants to operate CW with the GSOC.

If you own the GSOC and operate CW, I’d love your comments and feedback.

Other updates

I tried using the CW decoder yesterday via the “Modem” menu and had limited success decoding a CW rag chew.

My markup in red: You can see at the very end of this conversation, it decoded the call sign, but interpreted “TU” as “TEA”

The decoder seemed to adjust the WPM rate automatically at one point, but as you can see in the image above, almost every dit was interpreted as an “E” and every dash a “T”. I must assume I don’t have it configured properly, but I don’t have an operator’s manual for reference and instruction.  I’ve also tried RTTY decoding, but haven’t been successful so far–I’m pretty sure this is also because I haven’t configured it properly.

SWR Scanner

I tested the new SWR scanner and it seems to work quite well, plotting SWR across a given frequency range. I did note, however, that it doesn’t seem to confine itself to the ham bands at all. It does inject a signal as it scans (I read 1.5 to 2 watts on my CN-801 meter).

I discovered out-of-band scanning when I took the photo above while trying to do a scan of the 30 meter band. It started around 9.6 MHz–well into the 31M broadcast band where it shouldn’t be transmitting. Xiegu needs to limit transmitted signal to the ham bands.

Memory Keying

I had hoped Voice Memory Keying would be added along with TX/RX recording. I do believe this will eventually be included in a future update. It appears via the “Modem” menu that CW Memory Keying has been added, but I can’t sort out how to make it work (again, a operation manual would be quite handy).

Audio recording

I had hoped transmit and received audio recording would be added in this firmware update; I understand this will eventually be added.

Combined current drain

As I mentioned in a previous GSOC update, the GSOC controller and G90 transceiver both need a 12V power source–indeed, each has a dedicated power port. The GSOC does not derive power from the G90.

I was originally told that the G90 and GSOC both pull about .60 amps in receive which would total 1.2 amps combined. My Hardened Power Systems QRP Ranger battery pack displays voltage and current; it’s not a lab-grade measurement device, but it’s pretty accurate. When I operate the GSOC and G90 at a moderate volume levels in receive, it appears to draw 0.95 to 0.97 amps–basically, 1 amp.

At home on a power supply, this is inconsequential, but in the field you’d need to keep this in mind when choosing a battery. It’s on par with a number of 100 watt transceivers.

Spectrum display images

I’m still finding images on the GSOC display that are not present in the received audio. I mentioned this in my initial overview and it doesn’t seem the firmware update addressed this.

I can only assume the spectrum imaging might be due to the I/Q input being too “hot” coming from the G90 via the shielded audio patchcord. Perhaps there’s a function to manually lower the I/Q gain, but I haven’t found that yet.

Spectrum images are most noticeable on the 31 meter band, but found them on the 20 meter ham band as well.

Here are two screen shots that show how images appear when a nearby signal overwhelms the GSOC:

Images are not present all of the time, only when a strong signal intrudes.

Ever-present noise and spurs in portions of spectrum

Perhaps this is related to the issue above, but there are some spurs on the spectrum display that seem to be present whether the G90/GSOC is hooked up to an antenna or dummy load.

Here’s a photo of the GSOC hooked up to an antenna:

And to a dummy load:

I’ve highlighted the spurs in red and as you can see, the intensity is stronger without an antenna thus I’m guessing this is internally-generated. The spurs do not move on the display as you change frequency.

Other notes

Again, I feel like the GSOC firmware isn’t mature and I can’t yet recommend purchasing it. I feel like Xiegu have rushed this unit to market.

I know that, over time, more features will be added and Xiegu certainly has a track record of following up.

When I evaluate a product, I keep a list of notes that I send to the manufacturer and to keep for my own reference. In Alpha and/or Beta testing, I’d share this info only with the manufacturer. Since the GSOC is a product that’s in production and widely available, however, I thought I’d share them here publicly:

  • GSOC volume control scale is 0 to 28. The difference between 0 (muted) to 1 seems to be the biggest increment. Volume 1 is actually a low to moderate volume level (i.e. a bit high).
  • Boot up time for the GSOC is 30 seconds
  • A keyboard and mouse or capacitive stylus are almost required for accurate operation. Many of the touch screen buttons are quite small and difficult to accurately engage with fingertip. The pointer seems to fall slightly below where fingertip makes contact on the screen.
  • Notch Filter seems to have no effect even after the v1.1 upgrade. There is no Auto Notch feature either.
  • I can’t seem to engage split operation even though there are A/B switchable VFOs and a “Split” button above the spectrum display. Using a keyboard and mouse doesn’t engage it either.
  • There are a number of announced features that I haven’t discovered including some WiFi and Bluetooth wireless functionality.
  • For field use, you must pack quite a bit of kit: the transceiver, the controller, CW key cable, microphone, serial cable, I/Q cable, G90 Power cable, and GSOC power cable. It would also be advisable to take a wireless keyboard and mouse especially if you plan to use any advanced functions like CW memory keying.
  • It doesn’t appear that you have CAT control of the GSOC which complicates digital operation. I believe many of us hoped the GSOC would make digital mode operation easier with the G90, but it hasn’t. Indeed, I assumed the GSOC would have an internal sound card for digi modes much like the Icom IC-7300 and IC-705. Use of VOX control is still  the best way to control transmit. I hope this can be upgraded else this would be a missed opportunity.
  • Since the v1.1 upgrade, the GSOC hasn’t crashed (it did frequently with the v1.0 firmware).
  • Not a pro or con, but I wish the AF Gain/Squelch was AF Gain/RF Gain like most HF transceivers. I’ve accidently engaged squelch twice which essentially muted audio. Pressing and holding the PO (Power Output) button opens the RG Gain control function).

The GSOC Universal Controller is an interesting accessory for the G90 and I’ve read comments from users that love the interface and added functionality.

If I’m being honest, I feel like I’m Beta testing the GSOC. I’ve yet to find a GSOC operation manual–this makes it very difficult to know if one has correctly configured the controller and engaged features/functions correctly. A quick start guide is included with the product, but it really only helps with connections and starting up the GSOC the first time. If you’re a GSOC early adopter, just be aware of this. Again, I’m pretty confident Xiegu will make refinements and include promised features in future firmware updates. I understand their software engineer closely monitors the GSOC discussion group as well. If you’re considering the purchase of a GSOC, I’d encourage you to join the GSOC group.

Questions? Comments?

As I said, I can’t recommend purchasing the GSOC controller yet. So much can change with firmware updates, however, I would encourage you to bookmark the tag GSOC to follow our updates here on the SWLing Post. I will update the GSOC controller each time a new firmware version is issued and until Radioddity asks for the loaner units to be returned. Again, many thanks to Radioddity for making this GSOC and G90 evaluation possible.

Feel free to comment with any questions you might have and I’ll do my best to answer them!

Spread the radio love

Radio Waves: Ajit Pai to Resign, Hams Need to Embrace Hacker Community, Coast Guard Might Abandon HF Voice Watchkeeping, and FCC Action Against Unauthorized Transceivers

Radio Waves:  Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers.  To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!


FCC Chairman Ajit Pai to leave agency on Inauguration Day (PBS News Hour)

Federal Communications Commission Chairman Ajit Pai, a Republican, says he is leaving the telecommunications regulator on Inauguration Day.

President-elect Joe Biden will choose a new Democratic head for the agency. A new administration typically picks a new chairman.

Pai has presided over a contentious FCC over the last four years. He undid net neutrality rules that barred internet service providers like Comcast and AT&T from favoring some types of online traffic over others in 2017 and championed other deregulatory efforts. He has also worked to free up spectrum for cellphone companies so they can roll out 5G, the next-generation wireless standard that promises faster speeds, and cracked down on Chinese telecom companies as national security threats.

The incoming FCC is likely to try to reinstate net neutrality rules and focus on closing the “digital divide,” getting internet service to Americans who don’t have it because it’s not available or they can’t afford it.[]

Ham Radio Needs To Embrace The Hacker Community Now More Than Ever (Hackaday)

As many a radio amateur will tell you, ham radio is a hobby with as many facets as there are radio amateurs. It should be an exciting and dynamic place to be, but as those who venture forth into it sometimes sadly find out, it can be anything but. Tightly-knit communities whose interests lie in using $1,000 stations to chase DX (long-distance contacts), an advancing age profile, and a curious fascination of many amateurs with disaster communications. It’s something [Robert V. Bolton, KJ7NZL] has sounded off about in an open letter to the amateur radio community entitled “Ham Radio Needs To Embrace The Hacker Community Now More Than Ever“.

In it he laments that the influx in particular of those for whom disaster preparedness is the reason for getting a licence is to blame for amateur radio losing its spark, and he proposes that the hobby should respond by broadening its appeal in the direction of the hacker community. The emphasis should move from emergency communications, he says, and instead topics such as software defined radio and digital modes should be brought to the fore. Finally he talks about setting up hacker specific amateur radio discussion channels, to provide a space in which the talk is tailored to our community.[]

Coast Guard Proposes to Discontinue HF Voice Watchkeeping (ARRL News)

The US Coast Guard has invited comments by January 21, 2021, on a proposal to discontinue HF voice watchkeeping. The proposal [PDF] appeared on November 20 in the Federal Register. The USCG proposes to cease monitoring 4125, 6215, 8291, and 12,290 kHz, in the contiguous US and Hawaii, due to a lack of activity.

“We believe this change would have a low impact on the maritime public, as commercial satellite radios and Digital Selective Calling (DSC) marine-SSB HF radios have become more prevalent onboard vessels,” the Coast Guard said. “However, we would like your comments on how you would be affected if we terminated monitoring HF voice-only distress frequencies within the contiguous US and Hawaii, particularly if you use HF, but do not currently have a commercial satellite radio or an HF DSC-capable radio aboard your vessel.”[]

FCC takes action against marketing of unauthorized transceivers (Southgate ARC)

On November 24 FCC Enforcement Bureau (EB) issued a citation and order concerning the illegal marketing of unauthorized radio frequency devices

The citation says:

This CITATION AND ORDER (Citation), notifies Rugged Race Products, Inc. d/b/a
Rugged Radios (Rugged Radios or Company) that it unlawfully marketed six models of radio frequency devices that (a) operated outside the scope of their respective equipment authorization, or without any equipment authorization; (b) permitted any operator to program and transmit on new frequencies using the device’s external operation controls; and (c) lacked the appropriate labeling. Specifically, Rugged Radios marketed models RH5R-V2, RM25R, RM25R-WP, RM50R, RM60-V, and RM100 in violation of section 302(b) of the Communications Act, as amended (Act), and sections 2.803(b), 2.925(a)(1), 80.203(a), 90.203(a), 90.203(e), 95.361(a), and 95.391 of the Commission’s rules.

Read the Citation and Order at
https://docs.fcc.gov/public/attachments/DA-20-1395A1.pdf

Source FCC Enforcement Bureau
https://www.fcc.gov/enforcement


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

FCC Chairman Ajit Pai will step down on Jan 20, 2021

(Source: FCC.gov)

CHAIRMAN PAI ANNOUNCES HIS INTENT TO DEPART FCC

WASHINGTON, November 30, 2020—Today, Federal Communications Commission Chairman Ajit Pai announced that he intends to leave the Federal Communications Commission on January 20, 2021. Chairman Pai issued the following statement:

“It has been the honor of a lifetime to serve at the Federal Communications Commission, including as Chairman of the FCC over the past four years. I am grateful to President Trump for giving me the opportunity to lead the agency in 2017, to President Obama for appointing me as a Commissioner in 2012, and to Senate Majority Leader McConnell and the Senate for twice confirming me. To be the first Asian-American to chair the FCC has been a particular privilege. As I often say: only in America.

“I also deeply appreciate the chance to have worked alongside the FCC’s talented staff. They are the agency’s best assets, and they have performed heroically, especially during the pandemic. It’s also been an honor to work with my fellow Commissioners to execute a strong and broad agenda. Together, we’ve delivered for the American people over the past four years: closing the digital divide; promoting innovation and competition, from 5G on the ground to broadband from space; protecting consumers; and advancing public safety. And this FCC has not shied away from making tough choices. As a result, our nation’s communications networks are now faster, stronger, and more widely deployed than ever before.

“I am proud of how productive this Commission has been, from commencing five spectrum auctions and two rural broadband reverse auctions in four years, to opening 1,245 megahertz of mid-band spectrum for unlicensed use, to adopting more than 25 orders through our Modernization of Media Regulation Initiative, to aggressively protecting our communications networks from national security threats at home and abroad, to designating 988 as the threedigit number for the National Suicide Prevention Lifeline, and much, much more. I’m also proud of the reforms we have instituted to make the agency more accountable to the American people. In particular, for the first time ever, we’ve made public drafts of the proposals and orders slated for a vote three weeks before the agency’s monthly meetings, making this the most transparent FCC in history.

“Last but not least, I want to thank my family for all they have done to enable me to serve at
the agency. The public service of one generally results from the private sacrifice of many, and
I’m grateful for their love and support.”

###
Office of Chairman Pai: (202) 418-1000 / Twitter: @AjitPaiFCC / http://www.fcc.gov/leadership/ajit-pai

Spread the radio love