Tag Archives: General Coverage Transceivers

The Elecraft KX3 continues to impress

I’ve owned my Elecraft KX3 for five years, and this little rig continues to amaze me.

In 2013, I gave the KX3 one of the most favorable reviews I’ve ever published–and it continues to hold its own. That’s why last year I recommended the KX3 to my buddy and newly minted ham radio operator, Sébastien (VA2SLW), who had already been eyeing the KX3 as his first HF transceiver.

A few weeks ago, Sébastien bit the bullet and is now the proud owner of a KX3 with built-in ATU. He purchased the KX3 with plans to do a lot of field operations including SOTA (Summits On The Air) and also use the KX3 at home.

Wednesday, I popped by Sébastien’s flat to help sort through some low-profile antenna options. I had suggested that he not invest in a factory made antenna just yet, but instead explore what he’s able to do with a simple wire antenna directly connected to the KX3 with a BNC Male to Stackable Binding Posts adapter. I’ve had excellent luck using this simple arrangement this in the past with the KX3, KX2 and even the KX1.

I did a quick QRM/RFI survey of his flat and balcony with my CC Skywave SSB. While there were the typical radio noises indoors, his balcony was pleasantly RFI quiet. At 14:00 local, I was able to receive the Voice of Greece (9,420 kHz), Radio Guinée (9,650 kHz) and WWV (both 10,000 and 15,000 kHz) with little difficulty. His building has incredibly thick concrete walls–I assume this does a fine job of keeping the RFI indoors. Lucky guy!

We popped by a wonderfully-stocked electronics shop in Québec City (Électromike–which I highly recommend) picked up some banana plugs and about 100′ of jacketed wire. We took these items back to the flat and cut a 35′ length of wire for the radiator and about 28′ for the ground. We added the banana plugs to the ends of each wire.

Sébastien temporarily attached one end of the antenna wire to the top of the fire escape and we simply deployed the ground wire off the side of the balcony. Neither of these wires interfere with his neighbors and neither are close to electric lines.

I had planned to cut both the radiator and ground until we found the “sweet spot”: where the ATU could find matches on 40, 30, 20 and 17 meters (at least).

Much to my amazement, the KX3 ATU got 1:1 matches on all of those bands save 80M where it still could achieve a 2.8:1 ratio. I couldn’t believe it!

Frankly, Elecraft ATUs are nothing short of amazing.

Even the ATU in my little KX2 once tuned a 20 meter hex beam to 40 meters and found a 1:1 match to boot. In contrast, the Icom IC-7300 sitting next to the KX2 wasn’t able to match that hex beam even though we performed a persistent ATU search. Not surprising as I wouldn’t expect a 40 meter match on a 20 meter antenna, but the Elecraft ATU did it with relative ease.

Sébastian did a quick scan of the ham radio bands where we heard a number of EU stations. I also took the opportunity to point out how well the KX3 operates as a broadcast receiver with the AM filter wide open and using headphones in the “delay” audio effects mode. The Voice of Greece sounded like a local station–absolutely gorgeous signal.

It was getting late in the day, so I couldn’t hang around to call CQ with Séb, but I left knowing that he is going to have a blast playing radio at home and, especially, in the field. Next, he plans to build a simple mag loop antenna, get a BioEnno LiFePo battery and eventually add other Elecraft accessories to his station. I’d say he’s off to a great start!

Want more info? Click here to read my review of the Elecraft KX3 and here to read my review of the Elecraft KX2.

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Guest Post: Mark’s Micro Go-Box for the ICOM IC-7100

1 Reply

Many thanks to SWLing Post contributor, Mark Hirst, who shares the following guest post:

Micro Go-Box for the ICOM IC-7100

by Mark Hirst

You’ll be familiar I’m sure with the IC-7100 base unit and separate head unit design. It lends itself very nicely for vehicle installation.

Using it in any ‘portable’ situation however has always presented something of a challenge. A FT-857 or FT-891 can be carried as a single physical package with the head unit integrated into the body. The radios can sit and potentially operate on their tail in a backpack, with products like the Escort from Portable Zero making that process even easier.

I’ve had a few attempts at solving this portability conundrum, driven by a concern that there could be long term problems continually connecting and disconnecting the component parts for transport and operation, but knowing that a permanently assembled IC-7100 will always be an awkward dispersed structure.

My first solution was a Stanley 16 inch toolbox, which is fortuitously sized to accommodate the base unit and provides enough space to loop the original connecting cable and head unit. The box is not a bad fit, but certainly bulkier than necessary and leaves enough room for things to rattle around. When tilted vertically, the head unit can start moving.

Fast forward to this week when I discovered that the IC-7100 base unit will also fit inside a 5 litre XL storage box made by Really Useful Boxes:

http://www.reallyusefulproducts.co.uk/usa/
http://www.reallyusefulproducts.co.uk/uk/

The XL version of the 5 litre box has a taller lid, and as you can see from the accompanying photos, accommodates the base unit with the head unit sitting on top of it in a ready to use configuration. The tolerances for height are also exact, the VFO knob very lightly touches the lid, so don’t put something heavy on the box:

Once the lid has been removed, the radio can operate directly from the container:

To make the whole thing fit, I used a 25cm CAT 6 cable in place of the original connection cable and a significantly shortened power lead. As luck would have it, I created the shortened power lead a while ago because I often put the battery right next to the radio.

You can see that I removed a section between the power plug and the fuses, and now use the removed length as an extension should the battery be further away. Although it wasn’t my intention at the time, the main part is about 2 feet long, the secondary about 8 inches.

For transport, the power cable is coiled behind the head unit, ensuring the fuse holders sit in the void immediately behind it, while the microphone cable is coiled on top leaving the microphone resting inside its own coil. You can see the arrangement below:

In the next photo, you can see how the cabling emerges from the back of the base unit:

There’s just enough space for the power cable to leave the base and bend around without undue pressure, and likewise for the CAT 6 cable to curve round into the back of the head unit. Two angle connectors make the antenna ports accessible from above, while a short USB external drive cable provides access to the USB port for data modes and CAT control. A longer USB extension cable is attached to this short cable only when required, and the extension uses much more substantial ferrite chokes to mitigate noise from the computer.

To complete the transport package, I’ve cut out a kaizen style foam insert to make sure the base unit can’t move back into the cabling space, and another to make sure the head unit doesn’t slide towards the front.

The last problem of course is cooling. The fan is located in the front of the base unit, with slots along the sides and top to allow air flow. The box unfortunately is exactly the right size for the base, leaving no gaps for air to circulate. In the absence of a proper workshop or professional tools, I opted to use a hole cutter designed for putting pipes through wood panels. It turns out that plastic has a tendency to deform rather than cut under the blades due to friction heating. A sharp knife was essential in dealing with the effects of that deformation to produce the final smooth edges around the holes:

While I’m happy with the port exposing the front fan, the two holes on each side do not completely expose the side slots. Do I drill out the space between them knowing how tricky and flexible the plastic can be, and would a larger hole compromise the strength of the box? For now, I’m going to keep a careful eye for any temperature issues.

The current arrangement is to carry the box horizontally in a cheap travel bag:

Could the box be tilted vertically with the base unit nose down and carried in a back pack for longer excursions? Yes, but experience has told me that the lid latches on Really Useful Boxes have a tendency to pop open when you do that, so a luggage strap around the box may be required to prevent its very expensive cargo from spilling out. I’m also mindful that the box lid gently touches the VFO knob, so might put load on it in the vertical position.

The final result is something of a Swiss watch, and there isn’t much room for error. Things have to be arranged ‘just so’ to fit, but it does mean I can pack and pick the whole thing up in a handy container. The radio only needs a battery and antenna to be connected on site and then it’s ready to go.

There’s something oddly satisfying when unrelated objects come together like this. Who knew that this box was just the right size to fit the radio?

So, what do you think?

Thank you for sharing this project, Mark!

I love your Micro Go-Box: it’s practical, affordable and makes an otherwise awkward field radio easy to deploy and use. Looking at your photos, I realize that the IC-7100 does have one strong suit for field use. The IC-7100 front panel is tilted at a very comfortable 45 degree angle for use.

Post Readers: What do you think? Any other IC-7100 owners out there who take their rig to the field? Please comment!

Spread the radio love

The Mission RGO ONE: A new 50 watt all mode HF transceiver

10 Replies

Shortly after posting a set of photos I took at the 2018 Hamvention, I received a number of reader inquiries regarding one particular radio: The Mission RGO ONE.

I found this cool tabletop transceiver in the flea market area of the Hamvention early Saturday morning and included it with my inside exhibits photos. I wasn’t able to gather a lot of information from the representative at the time because the Hamvention staff opened the gates to general admission a full 30 minutes early, so I had to make a sprint to my table at the other side of the fairgrounds.

The following specifications/features were listed on the RGO ONE product sheet:

QRP/QRO output 5 – 50W
All mode shortwave operation – coverage of the 9 HAM HF bands (160m optional)
High dynamic range receiver design including high IP3 monolithic IC in the front end and H-mode first mixer
Low phase noise first LO – SI570 chip
Full/semi QSK on CW; VOX operation on SSB.
Down conversion superhet topology with 9MHz IF
Custom made crystal filters for SSB and CW and variable crystal 4 pole filter – Johnson type
Stylish and professional look
Compact and lightweight body
Multicolor FSTN LCD
Silent operation with no clicking relays inside
Modular construction – Mother board serves as a “chassis” also fits all the external connectors, daughter boards, inter-connections and acts as a cable harness.
Optional modules – NB, AF, ATU, XVRTER
PC control via CAT protocol; USB FTDI chip
Memory morse code keyer (Curtis A, CMOS B)
Contest and DXpedition conveniences

For even more detail, I recently contacted the rig’s developer, Boris Sapundzhiev (LZ2JR), who kindly answered all of my questions.

Boris replied:

Hello Thomas,

Thanks a lot for your message and interest about our new homebrew project that we called RGO ONE. Here you can find more about the radio:

QRP HF Transceiver

There are clickable highlights on the text which lead to a schematic diagram for each module so you can have a look if you like. Final documents and last revision of schematics will be available soon.

The idea of this project was inspired of an old TEN-TEC radios with 9MHz IF – their perfect analogue design and crystal crisp audio both CW and sideband. Mine have two very old TEN-TEC ARGOSY 525D and several moreTEN-TEC equipments. So with the help of the new electronic components available on the market we realize this old concept…

We’ve been working hard for almost three years to see what you saw at Dayton flea market table. A real performing HF 50W CW/SSB transceiver. We are 4 people in the team.. Other team mates are very good in industrial electronics manufacturing and helping very much with electronic PCB design, parts delivery, microprocessors and other things.

The idea of the front panel and other constructions design is mine .. I literally drew it in a couple of hours then our CAD designer put it in AUTOCAD/INVENTOR 3D design software.

Click to enlarge.

Click to enlarge.

Click to enlarge.

LCD we made in China and already stocked plenty of LCD and backlight units. Front panel is made by means of plastic mold method:

Here it is:

FACE PANEL MOLD PLASTICS OR ALUMINUM MACHINED

So far we got two samples that we tested already in real conditions and made several contest (LZ2RS helped with this task).

You can seek for video clips on YouTube (my channel) to see how it works.

Click here to view on YouTube.

I am back in Bulgaria now and today we had a team meeting so it is decided to start first lot 10pcs which will be completely ready to run. The time range of this is somewhere next two months. Then next lot will be 100 units probably some of them or most of them will be in a kit form with ready populated SMD small foot print components.

At the show in Dayton we revealed our target price for the base version – $450-$550. Hope to keep it as promised but final price will be available when first units come to alive.
First units will ship from Bulgaria, then we will try to stock more units in US.

This is briefly about our intentions of the project. A lot of interest, expectations and positive “WOW” feedbacks received so this urge me to go fast forward.

73, GL

Boris LZ2JR/AC9IJ

Thank you for the detailed reply, Boris! I will certainly follow this project with interest and post updates (readers: bookmark the tag RGO ONE).

I love the size of the RGO ONE and the fact it’s capable of a full 50 watts out in such a portable form factor. The front panel is very attractive, ergonomic and the backlit LCD screen is quite easy to read at any angle.

Boris, if you manage to hit your target price of $550 or less, you’ll no doubt sell these by the hundreds! I’ll be watching this project with interest.

Spread the radio love

Yaesu FT-818 details emerge (and beware of the fake “leaked” photo!)

17 Replies

I’ve been following news about the Yaesu FT-818: the next iteration of the venerable Yaesu FT-817ND QRP general coverage transceiver.

The FT-817 series has been on the market for nearly two decades. I remember purchasing one of the first production models when I lived in the UK in 2001.

It was a revolutionary radio at the time.

It was exceptionally suited for portable use, sporting an internal battery pack, on-board keyer, had all mode/all band capability and antenna ports on the front faceplate and rear. It was the most compact full-featured transceiver on the market. All this for about $670 US.

In 2004, Yaesu made upgrades and launched the model FT-817(N)D. In no small way, I’m sure this little radio has been a cash cow for Yaesu. It’s had an exceptionally long market run and has been the only QRP transceiver in the Yaesu product line for decades.

Recently, Yaesu released specifications and retail pricing of the FT-818. But before we go any further…

Don’t believe the fake prototype photos

It seems like every time a new amateur radio transceiver is announced, someone quickly assembles a “leaked” prototype image and publishes it on the web. Here’s the one someone pieced together for the Yaesu FT-818:

Click to enlarge (and see obvious Photoshop chop job)

To be crystal clear: this is not a leaked photo of the Yaesu FT-818. It’s (frankly) a terrible Photoshop job–someone playing with cutting, pasting and resizing bits from other transceivers.

I fully suspect the new FT-818 will not be a dramatic departure from the FT-817 in terms of styling and design. Perhaps it’ll be nearly identical. In fact, radio retailers have been posting the following image on their FT-818 ordering page:

Image taken from GigaParts.

This may simply be a placeholder, or it may be that all of the upgrades are internal and the ‘818 form factor will be identical to the ‘817.

Enough said…

What we do know about the Yaesu FT-818

Rumors of an FT-818 have been floating around the ham radio community for years. No surprise given the extraordinarily long run of the ‘817 series!

We do have concrete details now since ham radio retailers have been given features, specifications and availability dates. It appears the upgrades are iterative–this is not a dramatically re-designed rig.

Here’s what Yaesu has released (I took this from GigaParts, but retailers are posting variations of the same announcement):

Yaesu FT-818 6W HF/VHF/UHF All-Mode Portable Transceiver

The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.

The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity – 9.6v/ 1900mAh. The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (±0.5ppm).

The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier “R.I.T”; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization); AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS); Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors; Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on.

Features

Increased power output 6W(SSB, CW, FM) 2.0W(AM Carrier) *NEW!

Improved frequency stability ±0.5 ppm : Built-in TCXO-9 *NEW!

Larger battery capacity : 9.6V/1,900mAh (SBR-32) *NEW!

208 Memory Channels / 10 Memory Groups

Operates on 160-10m , HF, 6m, 2m and 70 cm Bands

Ultra Compact and Portable

Two Antenna Connectors

IF Shift, IF Noise Blanker, IPO, ATT

CW “Semi-Break-in”, CW Reverse, CW Pitch Control

Built-in Electronic Keyer

Multi-Color Easy to see LCD

Internal Battery Operation Capability

ARS Automatic Repeater Shift

APO Automatic Power Off

Front Panel Key Lock Mode

Specifications

Frequency Ranges:

RX:

100 kHz – 33 MHz

33 MHz – 56 MHz

76 MHz – 108 MHz

108 MHz – 154 MHz

420 MHz – 470 MHz

TX:

1.8 MHz – 29.7 MHz (5.3320 MHz/ 5.3480 MHz/ 5.3585 MHz/ 5.3730 MHz/ 5.4050MHz)

50 MHz – 54 MHz

144 MHz – 148 MHz

430 MHz – 450 MHz (Amateur Bands only)

Circuit Type: Double-Conversion Superheterodyne (SSB/CW/AM/FM)
Single-Conversion Superheterodyne (WFM)
Modulation Type: A1A(CW), A3E(AM), J3E(LSB,USB), F3E(FM), F1D(PACKET), F2D(PACKET)
RF Power Output : 6 W (SSB/CW/FM), 2 W (AM Carrier) @13.8 V
Memory Channels: 208
Case Size(W x H x D): 135 x 38 x 165 mm (5.31″ x 1.5″ x 6.50″) w/o knob and connector
Weight: 900 g (1.98 lbs) (w/o Battery, Antenna and Microphone)

Includes

Yaesu FT-818 6W HF/VHF/UHF All-Mode Portable Transceiver

Hand Microphone(MH-31A8J)

Battery (SBR-32 9.6V 1900mAh Ni-MH )

Battery Case (FBA-28) (Requires 8 “AA: batteries)

Whip Antenna for 50/144/430 MHz (YHA-63)

DC Cable (E-DC-6)

Shoulder Strap, Ferrite Core, Rubber Foot

Operating Manual

Battery Charger (PA-48)

The retail price is roughly $819 US shipped via GigaParts and $849 via Ham Radio Outlet. I’m sure Universal Radio will post the FT-818 to their site soon as well. At time of posting, I haven’t noticed any retailers outside the US including the FT-818 in their catalog.

I will plan to review the Yaesu FT-818, so bookmark this tag to follow any updates: Yaesu FT-818

Spread the radio love

CommRadio CTX-10 availability update

CommRadio CTX-10 approved by FCC

1 Reply

The CommRadio CTX-10

Many thanks to SWLing Post contributor, R. Lewis (KF5GV), who writes:

Just noticed on Universal Radio web page the Comm Radio CTX-10 has been approved by the FCC. They are accepting pre-orders on Dec 1. No indication of pricing but hope they announce it soon.

Thanks for the tip!

I’m looking forward to checking out the CommRadio CTX-10. For one thing, it’s in one of my favorite radio categories: portable general coverage QRP transceivers!

Since the CTX-10 receiver is likely an iteration of the excellent CommRadio CR1 series, I expect it’ll perform well on the broadcast bands as well as the ham bands. I look forward to reviewing the CTX-10.

The new CTX-10 prototype from CommRadio at Universal Radio’s 2017 Hamvention booth.

Follow the tag CommRadio CTX-10 for updates.

Spread the radio love

The Icom IC-7610 transceiver: a few details emerge

3 Replies

Many thanks to SWLing Post contributor, Mike Hansgen (K8RAT), who shares the following post from Icom UK:

The IC-7610 (Source: Icom UK)

Icom Inc. has released more details about the launch of the IC-7610 HF/50MHz SDR Transceiver and its target price. Icom plans to release this high performance HF SDR transceiver around late May with the product being rolled out across the globe in the following months. We expect that the IC-7610 should be available in the UK early Summer with a suggested retail target price of £2,999.99 ex.VAT. Please note that this target price and UK availability may be subject to change.

We expect demand to be huge for this product. Indeed many back orders are already on our system. So if you want to be one of the first customers in the UK to own one of these eagerly awaited radios, please contact your Icom Amateur radio dealer who will be able to put you in their order books.

More about the IC-7610 HF/50 MHz 100 W SDR transceiver

Following on from the technology incorporated into the IC-7300, the IC-7610 adopts the same RF direct sampling system for signal processing. By converting the analogue signal directly to a digital signal and processing it within the FPGA (Field Programmable Gate Array), it provides improved transmission phase noise and excellent RMDR of 105 dB (at 1 kHz detuning).

The IC-7610 will have two independent receivers, enabling simultaneous reception of two frequencies in different bands/different modes.

The IC-7610 will also feature high-speed, high-resolution performance. The real-time spectrum scope supports different bands and a dual display that can monitor different modes. It will also have a waterfall display function that displays received signals in time sequence. The DIGI-SEL unit will be available to both the main side and the sub side of the receiver. In addition, the IC-7610 adopts a large 7-inch full-colour touch screen panel.

Main features include:

• Further evolved RF direct sampling method.
• Excellent RMDR: 105 dB realized.
• Dual watch function can receive simultaneously in different bands and different modes.
• DIGI-SEL unit that eliminates excessively strong signals is installed in the main and sub of the receiving section.
• High-speed real-time spectrum scope and waterfall display function.
• 7-inch full-colour touch panel, outstanding operation and visibility

As mentioned earlier, demand is going to be enormous for this model, so get into contact with your authorised Icom Amateur radio dealer today.