Tag Archives: Troy Riedel

Troy reports on the Sony ICF-EX5MK2 analog receiver

Many thanks to SWLing Post contributor, Troy Riedel, for sharing the following report of his Sony ICF-EX5MK2 analog receiver:

A report on the Sony ICF-EX5MK2

by Troy Riedel

The consensus, ultimate, all-time AM DX radio is the Panasonic RF-2200. I do not nor have I ever owned this radio [yet!]. As such, I do not have that radio as a baseline and I cannot approach my review with that reference radio in mind. I own 10 or 11 portable Shortwave radios. Until now when I would AM DX, I would generally reach for my Grundig Yacht Boy 400 (~5.9” internal ferrite bar antenna). In my experience, the YB400’s Sensitivity is [overall] better than my Sony 7600GR, the Eton E5, and the Grundig G3 (just a few of the SW receivers that I own).

In this Sony review I also mention Tenergy batteries. I have no stake or financial interest in either Sony or Tenergy. I’m just a guy who enjoys SWLing as a secondary hobby – and let’s call AM DXing a tertiary hobby.

Part I: Description & Overall Impressions Prior to Use

History:

The Sony ICF-EX5MK2 is what I would call a legendary AM DX Radio. The radio is manufactured in Japan. It replaced the highly rated Sony ICF-55W (discontinued early-1980s and can command high prices on eBay). The EX5 was originally introduced in 1985 and it has been in continuous production since that year.

I’m not a radio expert, but I am not aware of any other AM receiver that has gone mostly unchanged for 32-years. The EX5MK2 has quite a loyal following among AM DXers. Its following and longevity is what I feel makes this receiver legendary.

The EX5 is smaller, but resembles the iconic Sony ICF-2010 shortwave radio. I do not own the ICF-2010, but it is my understanding that the EX5 shared similar internal circuitry with the 2010 until Sony ran out of component parts in the early 2000s (later versions of the EX5 and the EX5MK2 thus have more differences, under the hood, as compared to the ICF-2010).

The current version of this receiver being sold NEW is a “version II” that carries the model designation EX5MK2. The EX5MK2 was introduced in June 2009. So what are the differences between the EX5 and EX5MK2?

The original EX5 had analog TV Bands. Since Japan (like the USA) migrated to digital TV, the “version II” or EX5MK2 eliminated the TV Band and replaced it with limited shortwave. The shortwave on the current model has 6 crystal-controlled frequencies for the Japanese domestic service of radio Nikkei. As such, unless you live in Japan … or are in an area that might be able to coincidentally receive another SW station on one of those 6 crystal oscillator frequencies, you won’t be able to receive shortwave transmissions on this receiver (radio Nikkei 1: 3.925 MHz, 6.055 MHz, 9.595 MHz; radio Nikkei 2: 3.945 MHz, 6.115 MHz, 9.760 MHz). To be perfectly clear, all six frequencies are accessed via a switch setting to a 1, 2 or 3. There is no SW tuning, thus no other shortwave frequencies other than the six that are programmed into this radio can be accessed! Do not purchase this radio if you desire a shortwave radio!

Additionally, the EX5 & EX5MK2 both have SYNCHRONOUS DETECTION. However it is my understanding that the EX5MK2 has updated or improved this feature (I do not own the former thus I cannot say for sure).

Before Purchase Research:

In my research before purchasing the unit, I relied on an EX5 review by Gary De Bock as well as a review by “RadioJayAllen”.

Before a purchase I will typically download and read a receiver’s user manual. However since this is a radio manufactured for and sold on the Japanese market, the radio’s documentation is only published in Japanese. But this didn’t stop me!

Because my Japanese is not at a level to translate, I relied heavily on online language translation and I painstakingly translated the entire manual in MS Word and then converted it to a PDF (click here to download as a PDF).

Frankly, I found nothing earth-shattering in the manual. The EX5MK2 is an analog receiver with bare-bones features (other than the SYNC – more later). Unless you are unfamiliar with using SYNC and/or you do not know what it means to separate the USB or the LSB of a carrier signal, there is really no need for the manual.

Until recent times, this receiver was only available from Japanese sellers on their retail web sites, and via Japanese sellers on eBay & Amazon. However, Amazon now stocks the EX5MK2 in their US Warehouses and offers free, 2-day Prime Shipping. Amazon Prime is where I purchased my receiver. If one is interested in this receiver, my advice is to shop. I have never seen a receiver in which prices varied so wildly – and I do mean wildly – from approximately $119 to $249 USD! That’s crazy.

Reading reviews on Amazon were also very helpful in my purchasing decision. But I recommend you read individual reviews and not rely solely on the numerical overview. Why? You can tell by the review if the reviewer has knowledge of radios … there are several reviews of people complaining that the “shortwave feature is useless” – and yes, that’s correct (outside of Japan) but one should not buy the EX5MK2 as a general coverage shortwave receiver as it has AM DXing DNA in its core!

Specifications:

The radio is packaged inside a fairly non-descript cardboard box with no accessories other than an old-school carry strap for the radio and a complimentary set of four Sony C/R14 [disposable] batteries. Once these Sony batteries are expended, I will switch to Tenergy Centura “C” Low Self Discharge (LSD) NiMH Rechargeable Batteries. I am an occasional AM DXer and the Tenergy Low Self Discharge batteries keep 85% of their charge after one-year. I keep Tenergy LSD AAs in my infrequently used shortwave radios and I always know they will have a charge no matter how long they sit idle. Tenergy Centura LSDs are very reasonably priced, too.

The radio is 10” long/wide (10 3/8” to include the tuning knob on the right-side of the cabinet), 5 9/16” tall, and 2 ¼” deep. With batteries installed, it weighs slightly less than 2.5 lbs.

The optional AC Adapter is the Sony AC-D4L. The adapter, new, is only available in Japan and possibly via a pricey purchase through eBay. There are many listings on eBay and Amazon, of Chinese-made “For Sony AC-D4L” adapters but these are not the recommended Sony-made adapter. The Sony AC-D4L is highly rated and said to be a quiet adapter that does not produce RFI that could be introduced into the radio I do not know how well the aftermarket Chinese adapters function. Also, the EX5MK2 requires a negative center tip. For those of you that own a Sony ICF-7600GR, that radio requires a positive center tip. The AC Adapters for those two radios are – unfortunately – not interchangeable! I note this because at least one vendor that I encountered tried to tell me otherwise (he tried to sell me a positive tip 7600GR adapter and said it was the same adapter used for the EX5MK2 – not so).

Note: During the Field Test I found this receiver to be extremely RFI sensitive. I would only operate this receiver on batteries – but if I had to use an AC Adapter, I would only trust the recommended Sony-branded AC.

The EX5MK2’s analog slide tuning dial is linear, or rather the frequencies are evenly spaced across the dial (a nice feature that makes tuning a bit easier; admittedly I’ve become spoiled by digital tuning and I had to re-develop some patience with analog tuning). An additional, unique feature of this radio is the size of the analog slide dial window. It covers approximately 60% of the radio! The dial is filled with the precise locations of 48 domestic Japanese AM stations (in Japanese characters, of course). Obviously this won’t help anyone outside of Japan (but remember, this is a Japanese radio for the Japanese market thus I’m sure this feature is appreciated in Japan).

The EX5MK2 does not have a lighted dial. That is quite disappointing. The only lighted feature on the receiver is a red LED on the very top of the slide dial that illuminates on strong signals – but not all signals. At this price point, I feel a non-illuminated dial is a huge omission.

I have not opened-up the cabinet of my EX5MK2, but my research indicates this receiver has a 180mm (7.1”) internal ferrite bar antenna (there are photos on multiple Japanese language blogs where owners have opened the case and show the internal ferrite bar antenna next to a tape measure or ruler – you can find these sites via a Google Image search). The FM/limited shortwave whip antenna is 36 ¾”.

Since this is a Japanese market radio, it has FM Coverage from 76 – 108 MHz and AM/MW Coverage from 530 – 1600 kHz. My sample of the EX5MK2 has coverage up to 1650 kHz to the very top end of the tuning slide beyond “1600”. For those who need extended AM beyond 1600, this may not be the receiver for you.

As mentioned earlier, the most important feature of this radio is SYNCHRONOUS DETECTION with SSB that not only SYNCS or “locks on” to a signal, but also has two additional switch settings that allow one to separate the carrier signal in either the Upper Sideband/USB or Lower Sideband/LSB. This means there are three settings: NORMAL SYNC where the signal locks on to the entire signal, as well as a second LSB and a third USB setting that allows you to isolate a Sideband and listen to only the lower or upper parts of the carrier signal. This should help the receiver’s SELECTIVITY – hopefully I’ll find out when I Field Test this unit.

Summary of Part I: Initial Impressions

First, a little disclaimer: I am not a radio expert – not a “radiohead”. I am not an amateur radio operator. I know what I like and I know what works for me.

The radio appears to be well made. It has girth and weight like some receivers I’ve owned in yesteryear – it just feels like one is holding quality. The receiver is analog, not digital, and the tuning is tight and smooth (no slack in the tuning knob like some lesser quality analog receivers and turning the tuning knob results in a proportional movement in the tuning dial). The linear dial – which I found to be extremely accurate on my sample – makes tuning to a precise frequency a bit easier than I had expected. Despite this, I still found myself longing for a digital readout and I frequently used a digital receiver to verify a frequency if I didn’t hear a station I.D. after a reasonable amount of time.

At this price point, it is disappointing there is no illumination of the dial. But I have to remind myself that this receiver is essentially a 1985 model with minimal changes over the past 32-years.

But the big question remains: how does it perform and is it worth its price? Reported excellent AM DX performance – enhanced through the SYNC DETECTION WITH SSB feature – is the reason I chose this model. Was it a wise purchase? I’ll field test it in Part II to answer those questions.

Part II: Field Testing

Field Test Conditions:

Power: Battery, with no external antenna (only the internal ferrite bar antenna) though I did try enhancement through inductive coupling via a Terk Advantage and a Tecsun AN-200 – two very similar AM Loop antennas.

Audio:

I measured the speaker to be 3 ¼” in diameter. Too bad the analog slide tuning dial takes up 60% of the front of the radio because the cabinet size could support much larger speakers (“speakers” plural instead of singular) to produce much better sound. With AM DXing, I’m not interested in high fidelity. However, I found the audio to be good enough to fill the room with a pleasing sound.

There is a TONE switch. I suspect this is really a bandwidth setting as the translated owner’s manual states to leave it on “High” unless there is adjacent station interference (then toggle the switch to “Low”). To me the switch appears to be a wide(r) versus narrow(er) bandwidth – wider for fuller sound and narrower to help eliminate adjacent channel interference. It seems to function as intended.

FM:

The EX5MK2 is not renowned as an FM receiver. However, I was pleasantly surprised. It very easily pulled-in my favorite station about 40-45 miles away. During bandscanning across the dial, the receiver proved itself a decent if not worthy FM radio – not a DX machine, but of a quality where I wouldn’t feel I needed to reach for another receiver that possesses high fidelity audio. For general usage, I was pleased.

AM:

To me, AM performance is the meat and potatoes … AM is the reason this receiver is so popular with a huge following. Unfortunately, mine did not measure up.

To reiterate, I’m not a reviewer. I am not loaned complimentary radios to review. And as a retiree, I am not able to buy multiple samples. I can only evaluate the sample I received and thus I can only assume I have received a representative sample.

I quickly discovered the Sony EX5MK2 is the most RFI sensitive receiver I have ever encountered!

My Listening Post is a sitting room off the 2nd floor master bedroom. It extends outward from the main profile of my house with our breakfast nook underneath. This room has served me well for shortwave listening and AM DXing (AM DXing via several of my shortwave receivers).

However, the EX5MK2 proved to be quite fickle in this location. I was never able to completely eliminate the RFI issue I encountered with this radio. Even a FitBit in its charger created RFI so bad that the only thing heard between booming AM stations was a high-pitched RFI squeal. And this charger is plugged-in for perpetuity and has never cause any hint of an issue with any other radio (while sitting at my Listening Post, I routinely recharge my FitBit while listening to my radios – plural – and until now I had never, ever encountered any such RFI issue with my FitBit on any of my other SW radios). Frankly, I was dumbfounded to discover this.

I can only speak for my sample, but prospective buyers should keep RFI sensitivity in mind. Since I have never read any other report of RFI problems, maybe my unit is not properly shielded? Since I’m not a technically savvy “radiohead”, opening up the receiver to look inside would do me no good to evaluate its shielding.

Sensitivity:

I can see why people like the EX5MK2’s sensitivity (or the ability to receive distant AM broadcasts). During its first daytime test, I immediately and easily captured a signal from WWJZ 640AM in Mount Holly, NJ (Metro Philly). That station is approximately 300-miles to my northeast. It operates at 50,000 watts, however it’s not the easiest 50,000 watt station to receive from my location.

But complications from RFI interfered with my Field Testing.

After reasonably eliminating nearby RFI to include unplugging my FitBit, AM bandscanning revealed a horrible RFI hum (more like a shout and not a hum) – the worst of which is below approximately 850 kHz. It seemed the only stations that I was able to receive within this RFI Zone was the WWJZ 50,000 watt station and a couple of local stations. The true “DX Test” type of stations seemed to be buried in the RFI with zero chance of anything being audible. This was quite disappointing to say the least.

I continued with daytime as well as nighttime bandscanning over multiple days, however I found myself frustrated with interference issues. Yes, I easily received WSB AM750 in Atlanta at night (565 miles to my southwest), but again it seemed only the big boomers were receivable below 850 kHz and even some of the more local stations disappeared.

Comparing the EX5MK2 to my Yacht Boy 400 … yes, the YB400 received the same stations the EX5MK2 did, but the EX5MK2 definitely received them louder and more clearly (possibly attributed to the superior SYNC DETECTION of the EX5MK2). But most importantly to me the same interference issues that the EX5MK2 displayed did not plague the YB400.

I must admit, at this point frustration & disappointment out-weighed my planned Field Testing and I lost my desire to continue with rigorous testing.

Some people reading this might be disappointed and may be thinking, “why didn’t you take this outside, or into the countryside away from possible RFI sources?” to finish the testing. That’s not how I use my radios. Nearly all of my listening is from my house. Yes, I may have been able to isolate and better diagnose the interference problems I encountered by going outside my house. But I had already made the decision that this radio was going back to Amazon. In the end, my 1994 Yacht Boy 400 better met my needs than the EX5MK2.

Note:

The SYNC DETECTION feature on the EX5MK2 appeared to justify its hype. Unfortunately due to my RFI issue, I never truly put the USB/LSB feature to a test. Yes, isolating the USB/LSB did help to separate several distant stations on the upper two-thirds of the AM band, but in my opinion a true SELECTIVITY test would be to separate and receive a distant, weak station from the adjacent channel interference of a much stronger station. I never encountered this opportunity, but I must also admit that I essentially abandoned the Field Testing once I decided to return my EX5MK2.

Also, and I don’t know why, inductive coupling with a Tecsun AN-200 enhanced the EX5MK2’s AM reception but the Terk Advantage didn’t yield the same results. They are similar antennas and why the AN-200 was exponentially superior to the Terk Advantage is not something I can answer.

Summary:

Given its reputation, I am sure the EX5MK2 is a good, if not great, receiver. But my sample, for whatever reason, did not measure up.

And please, if you soon see an “open box” EX5MK2 listed on Amazon – it quite possibly will be the one I returned! My recommendation is to pass on that one and purchase a new, sealed box unit.

Many thanks, Troy, for sharing your detailed review/report of the Sony EX5MK2. Thank you, especially, for taking the time to translate the EX5MK2 manual.

As Troy mentions, perhaps he simply received a lemon unit–one that had quality control issues such as possible shielding and/or grounding problems.

I can tell you as a reviewer that there are few things as frustrating as throwing yourself into a highly-anticipated review only to be disappointed by your particular unit’s performance. It’s like buying a new car only to find out it rattles as you drive–!

I am very curious if anyone else has purchased the EX5MK2 from Amazon recently and experienced similar issues? Or, have you found that this analog receiver lives up to its stellar reputation? Please comment!

Spread the radio love

On Sale: Executive Editions of Satellit and Traveler III

The W6LVP magnetic loop antenna

24 Replies

Many thanks to SWLing Post contributor, Troy Riedel, who asks:

Just curious if you or anyone you know have any experience with Magnetic Loops from W6LVP? […]Here’s his eBay page – 458 feedbacks and 100%.

Thank, Troy! I’ve never used the W6LVP loop, but the price–in comparison with other wideband mag loop receive antennas–is very attractive.

W6LVP currently offers two models of loop antennas:

Here’s the product description of the Mag Loop with Power Inserter from the W6LVP website (where orders can also be made–pricing identical to eBay):

The Wellbrook Model ALA1530LN-2 and DX Engineering (Pixel/Inlogis) Model RF PRO-1B magnetic loops are both good amplified receive antennas. However, they are both expensive. Shipping the Wellbrook antenna from the UK to the US adds another $100.

Extensive side-by-side testing of the Wellbrook, DX Engineering, and W6LVP receive loops was compiled using simultaneous WSPR signal-to-noise reception reports on all LF, MF, and HF amateur bands. In addition, extensive laboratory bench tests measuring gain, signal-to-noise ratio, and IMD were also performed. Signal-to-noise ratio is important to pull weak signals out of the noise and IMD is important to reject distortion caused by nearby strong transmitters such as AM broadcast stations. In both test regimens, all three antennas performed very well and without significant difference.

The antenna version listed here includes a power inserter for use with receivers or with transceivers that have a separate receive antenna input. If your rig doesn’t have a receive antenna input, check out my antenna with a transmit/receive switch.

If you live in the shadow of one or more high-power AM broadcast transmitters, contact me about a special version just for you. Please contact me at [email protected].

W6LVP amplified receive-only magnetic loop antenna (boy is that mouthful):

The W6LVP mag loop is a complete receive antenna system delivering top-of-the-line performance to amateur radio operators and SWLs – particularly for those with space and/or budget limitations. It is a great complement to vertical or wire transmit antennas. You have a knob to turn up the power but don’t have one to turn up the received S/N.

Ten foot circumference (approximately 1 meter diameter) loop. Small size yields a natural stealth for HOA challenges. The loop is rigid enough to maintain its shape but flexible for portable transport or attic installation.

Includes a low-noise, broadband amplifier covering 2200 (135 kHz) through 10 meters (30 MHz) with no tuning or adjustment. Perfect match for continuous tuning SDR receivers. Great for contesters to quickly check all bands. Greater coverage is possible at reduced performance.

Light-weight antenna structure fabricated from furniture-grade PVC yields a strong but very light antenna weighing only 2 pounds (not including power inserter or power adapter). Great for both portable/camping as well as fixed installations. Light weight and small size make for lower shipping cost – particularly compared to shipping from the UK.

Directly compatible with a low-cost speaker tripod stand (not included) for portable operation.

Compatible with light-duty rotator (recommended) for fixed operation. Loop can be rotated to null interference by up to 30 dB or enhance desired signals.

Includes low-noise linear AC power adapter to generate clean 12 volts for the loop amplifier. Unlike the DX Engineering antenna which requires 24 VAC, power can be easily supplied by 12 volt batteries during portable operation. Reverse polarity and short circuit protection provided by automatically resettable fuse.

Eham reviews are very positive–so far, 5 stars on all six reviews.

I also discovered this short video of W9OY comparing the W6LVP loop to a full size 80 meter vertical (verticals are much more susceptible to noise than loops):

Click here to view on YouTube.

I am very curious if any SWLing Post readers have ever compared the W6LVP loop to the Wellbrook or Pixel Loop antennas.

I actually own the Pixel Loop and might very well purchase, review and compare the W6LVP loop later this year (if time allows).

If you own the W6LVP loop and/or have compared it with the Pixel or Wellbrook, please comment!

Click here to view W6LVP antennas on eBay.

Click here to view the W6LVP website.

Spread the radio love

Troy updates the Tecsun PL-880 hidden features reference sheet

6 Replies

Many thanks to SWLing Post contributor, Troy Riedel, who has recently added the hidden bandwidth adjustment feature to Cap Tux’s excellent PL-880 reference sheet.

Here are links to download the updated sheet:

PDF
MS Word

I will also add this to the Complete list of Tecsun PL-880 hidden features page: a place where you can comment if you note any previously unpublished PL-880 hidden features.

Thanks again, Troy!

Spread the radio love

Continued public support for restoration of ABC shortwave services

21 Replies

Many thanks to SWLing Post contributor, Troy Riedel, who shares the following from a Tecsun Radios Australia press release:

Public support has been steadily increasing in favour of the #saveshortwave campaign.
Opposition leader Bill Shorten has written to the Prime Minister to ask him to step in urgently to stop the ABC from carrying out their plan to cut shortwave transmission today, 31st January 2017, saying:

“I am deeply concerned that the ABC took this decision without satisfactory consultation with affected listeners, community representatives and emergency service workers and agencies.”

The alternative solutions that the ABC have offered in the place of shortwave transmission are simply not practical for many listeners. In areas beyond signal reception, as many of the affected areas are, both AM and FM radio services are not available, and the equipment needed to receive radio services via satellite on the Viewer Access Satellite Television (VAST) is expensive and impractical for on-the-move reception.

The latest statement from the ABC promised that they would “supply (donate) a VAST satellite system to all Royal Flying Doctor Service bases, and 4WD Radio club bases in the affected region, allowing them to rebroadcast emergency or warning messages as required.” The issue is, however, that The Royal Flying Doctor’s shortwave broadcasts are not designed to cover the same geographical area as the ABC’s dedicated shortwave broadcasts, leading to a potential shortfall in range and availability.

Another key factor is that farmers, stockmen and the like in remote areas have listened in to shortwave broadcasts for 100 years or more – this is a hard-wired habit. How is information about the transition going to be provided to them if not by the only medium that they use?

Jay Mohr-Bell works on a cattle station outside of Katherine, and knows only too well about this:

“The ABC fails to understand that their audience who listens to local ABC via shortwave do not favour this service, this is their only available service,” he said in a statement to Guardian Australia, “essentially the ABC is closing down the shortwave service and replacing it with nothing.”

Alongside important concerns regarding access to emergency announcements, residents are also sadly losing their ability to listen to live radio and music, which is important from a community and integrational perspective.

Federal minister Nigel Scullion said “there was no need for the ABC to make this decision with no notice or community consultation.”

The ABC issued a statement yesterday to say it was “deeply committed to rural and regional Australia and the one-third of Australians who live outside of the capital cities.” From what we can see however, their actions seem to demonstrate otherwise.

We now have proof that our voices are being heard by the ABC and the Australia Government. We invite you to write to your local MP to tell them once and for all how much you value the shortwave service. Alternatively, the Northern Territory Cattlemen’s Association have drafted an email found here that you can sign and send to the Secretary of the Senate Enquiry.

Lets rally together one final time to #saveshortwave

This Australia-based radio retailer is not the only one behind a campaign to restore shortwave services, senator Nick Xenophon says he will introduce legislation to Parliament to force the ABC to reinstate its shortwave radio service.

Spread the radio love

Herrington sale features Grundig shortwave radios

Troy reviews the Audiomax SRW-710S

37 Replies

Many thanks to SWLing Post contributor, Troy Riedel, for the following guest post:

A Mini-Review of the Audiomax SRW-710S

by Troy Riedel

Why would someone want a sub-$20 shortwave radio? Wait … I guess I should be answering questions & not asking them, right? But I’ll give you my answer to “why I want a sub-$20 shortwave radio”: I have many nice radios, but I wanted one that I consider “disposable”. I define “disposable” as something I won’t be upset if I lose, get it splattered with paint, or leave it outside only to get rained on. Taking the family of four to the movies nowadays costs upwards of $100 (the three ladies I live with can really throw-down pop & popcorn!) so a sub-$20 radio, even a “disposable one”, is a true bargain.

I have seen the SRW-710S badged under three different names: Audiomax, VITE and TIVDIO. There very well may be other badging. I paid $18.52 for my Audiomax badged device direct from a vendor in China. I’ve subsequently seen it as low as $13 on eBay and as much as $37 on Amazon. So much for a sub-$20 radio, huh?

The SRW-710S comes with only a USB charging cable in the box to recharge the Li-ion BL-5C battery (no earbuds, no case or pouch – just a very simple set of basic instructions). The 710S features a small LCD screen that offers menus in three languages: English, Spanish & Chinese.

The screen greets you with “welcome” (lowercase) when turning it on & “Bye Bye!” when you power-off. There is a Sleep Timer function that I have yet to use. All of the ports are on the right side of the unit (nothing on the left). It has a TF Flashcard Slot – no card provided – for recording off the radio & for playing pre-loaded mp3 & wma files from the flashcard.

It has 100 memories, a Line-In port, a built-in mic, and a headphone port. There is no ANT-In port. This radio has AM, FM & SW (no LW) with the appropriate international tuning steps. Lastly, there is no folding stand on the back (one is provided and is attached to the wrist strap – it is inserted into a small slot just above the battery cover).

One Chinese web site listed the SRW-710S as having an “AKC6951 DSP chip”. Until now, I had never heard of this DSP chip and I frankly know nothing about it. Maybe some more informed readers can comment?

Operation is easy (except for one quirk that I will detail later). There are two rows of numbers for direct input of a frequency. Simply input the frequency … and then wait (there is an approximate 3-5 second delay from input to the radio actually tuning to the frequency … I am still getting used to this pregnant pause). You also have an option of tuning directly to a meter-band.

Of course, there is no SSB for this low price.

The one speaker is a bit “tinny” but adequate (stereo via user-supplied earbuds). And considering the price point, the RF shielding isn’t too bad. I can actually use the shortwave band of this radio in my kitchen and breakfast nook (I cannot say that for my more expensive receivers).

The biggest limiting factor in reception is the size of the telescopic antenna (15.5”). However, for its size I am quite impressed (it’s exponentially better than the old Grundig G2000A Porsche that has a 21.25” antenna – but that radio is notorious as needing a reel antenna). Just via the telescopic whip, I can actually tune the major broadcasters to NA (e.g., Radio Romania), I can adequately tune to the VOA 15.580 MHz signal to Africa during the North American East Coast AFTN, and the time signals are easily audible (of course, frequency appropriate for the time of day).

I do not plan to open the radio’s chassis, but AM reception seems to be limited due to the obvious small size of the ferrite antenna (the radio itself is essentially palm-sized, approximately 4.75” x 3” & less than 1” thick). My postal scale indicates it weighs 5.5 – 6 ounces including the battery. The radio must be propped to support it when attaching the telescoping whip to a Slinky Antenna (even the weight of the Slinky’s alligator clip causes balance problems)
One quirk I have found: there is a “Lock” key. However, it only seems to lock the radio power “on” (locks are used to lock the power “off” during transport so the power remains off and the battery doesn’t drain). The “Lock” feature is not discussed in the instructions and at present I have not figured-out if this switch works in the traditional way. I find this to be quite amusing because it’s either an odd quirk or I’m just not smart enough to intuitively figure it out.

I am quite satisfied with my new “disposable” $18.52 Shortwave Radio (I have no information whether the quality I have considered is consistent through a production run or between badging). For those who wish to listen to a local AM or FM station – or listen to one of the “major” shortwave broadcasters with a booming signal into your part of the world – you can’t beat it for this price point. I can see myself using this radio while I complete outdoor household repairs or while cleaning-up the garage. Too bad it’s so close to Christmas, this would make a great stocking stuffer to introduce someone, young or old, to the world of shortwave.

Update: Searching for the SRW-710S

Note that the lowest prices omit the model number in eBay search results.

Click this link to search eBay for the SRW-710S on eBay.

Scroll through search results to find a matching receiver.

Thank you, Troy, for mini-review of the SRW-710S! Like you, I have very low expectations from shortwave portables at this price point. Still…for the glove compartment of your vehicle, for outdoor listening, for small gifts? These fit the bill! I’m most impressed you could receive the number of stations you did from inside your home.

Spread the radio love