Monthly Archives: February 2017

The Voice of America celebrates 75 years

Willis Conover interviewing Louis Armstrong (Photo source: Inside VOA)

A little more than seven weeks after the United States officially entered World War II, a live, 15-minute shortwave radio broadcast was transmitted into Germany from a small studio in New York City on February 1, 1942.

It was introduced by the American patriotic song “The Battle Hymn of the Republic.” Then, announcer William Harlan Hale’s voice could be heard saying: “We bring you Voices from America. Today, and daily from now on, we shall speak to you about America and the war. The news may be good for us. The news may be bad. But we shall tell you the truth.”

That was the very first broadcast from what, 75 years later, is now the Washington-headquartered Voice of America.

By the end of the war, VOA was broadcasting in 40 languages, with programming consisting of music, news and commentary.

Since then, VOA has grown into a multimedia international broadcasting service, with programming and content in 47 languages on multiple platforms, including radio, television and mobile.

On that first broadcast, announcer Hale’s words set the standard for future programs.

?And since 1976, his words have carried the weight of the VOA Charter, which by law requires VOA to “serve as a consistently reliable and authoritative source of news.” What’s more, it says VOA news must “be accurate, objective and comprehensive.”

“It’s been 75 years since we first began broadcasting objective news and information around the world,” said VOA Director Amanda Bennett. “And now, I think what we do here is more important than ever.”

Over the years, VOA correspondents and freelance reporters in many parts of the world have been on the scene to cover major world events.

In 1989, VOA East European correspondent Jolyon Naegele reported on demonstrations in Czechoslovakia and the fall of the communist government. Later that year, on the other side of the world, VOA increased programming and added staff to its Beijing bureau to cover the student-led demonstrations in Tiananmen Square. Beijing Bureau chief Al Pessin was expelled from China for his reporting.

Today, VOA broadcasts news and other programming through 2,500 television and radio affiliates around the world. At the same time, it provides content for mobile devices and interacts with audiences through social media.

As of 2016, VOA’s weekly audience across all platforms averaged more than 236 million people worldwide.

Check out more information on our VOA 75th anniversary page.

Click here to read this article on the VOA News website.

Spread the radio love

The versatile Kenwood TH-F6A

7 Replies

In reply to my recent post about the Yaesu VX-3R, SWLing Post reader Tha Dood comments:

[The Yaesu VX-3R] is a neat little HT, but the Kenwood TH-F6A is way more versatile.

How? Full 5W on 2m, 222MHz, and 440MHz, and will RX 150KHz to 1.3GHz in AM, FM, FM wide, NBFM, USB, LSB, and CW. All that in a size of a pack of cigs. Yes, it will overload easily, but something that wide banded and this small, I kind of expected that.

However, want to hear what your wireless FM innercom sounds like on 175KHz? You can do that. Want to hear what your 222.1MHz transverter sounds like on SSB? You can do that. Need to tune-in to local AM / FM radio when power goes out? You can do that. Want to listen to CB CH19 truckers gripe about traffic conditions? You can do that. Want to listen to aircraft traffic at an air show? You can do that. You want to monitor 6M 50.125MHz USB to hear when that band opens? You can do that.

No, it doesn’t have D-Star, DMR, Fusion, or even SW’s DRM, but analog-wise this HT is so versatile, what else is out there like it?

Thanks for sharing your thoughts about the TH-F6A!

A couple more things I like about the TH-F6A:

it meets MIL-STD 810 C/D/E standards for resistance to vibration, shock, humidity and light rain
It has a dedicated number keypad for direct frequency entry (something, sadly, the VX-3R lacks)

I’ll put the TH-F6A on my “wish list” this year and perhaps give it a thorough review. (Perhaps Santa Claus is listening!?)

Here’s a snapshot of TH-F6 pricing at time of posting:

Spread the radio love

Dave notes unfavorable reviews of the Tecsun PL-310ET

33 Replies

[Update: Most comments point to these negative reviews as outliers–possibly a bad batch from the factory. All-in-all, the PL-310ET is favorably reviewed.]

Many thanks to SWLing Post contributor, Dave Zantow, who writes:

I see the Tecsun PL-310(ET) has been receiving some very negative reviews over on eHam in the last days. Too bad:

http://www.eham.net/reviews/detail/10283

Thanks for the heads-up, Dave!

Perhaps these reviewers simply received faulty/lemon units? Internal soldering and construction can vary. On the other hand, both reviews were submitted on Feb 1, 2017 implying their units probably came from the same production batch. There are a couple of recent negative reviews on Amazon.com as well (though not detailed).

Of course, it does make one wonder if Tecsun made any internal design changes to the PL-310ET. But again, perhaps these two reviewers simply received units from a faulty batch.

For sure, these reviews are not consistent with the excellent performance of the PL-310ET I know–which is, by any standard, an amazing little radio!

I don’t want to imply there’s something wrong with the current PL-310ET production run, but I am curious if anyone else has been disappointed with their recently-purchased PL-310ET. Comments?

[UPDATE: based on the many comments–thank you!–it appears at least PL-310ETs that were purchased up to the end of December 2016 are functioning perfectly. Again, perhaps these two reviewers received faulty units.]

Spread the radio love

From the Isle of Music, Week of February 6-11, 2017

Video: Juan touts Panasonic RF-2200 performance & filter shapes

2 Replies

Many thanks to SWLing Post contributor, Juan Pablo Carlino, who writes:

Hi. I own one RF-2200 after buying it in eBay in March 2008. Since then it became my favourite portable radio and as everybody [has commented], its a pleasure to hear MW with it.

I explain this due to the fact that it has a good rotative ferrite antenna and also because the narrow and wide filters have a suitable shape for MW: at least in my country each MW is spaced from the other by 10 KHz, so you don’t need a very sharp filter. The narrow one is not so narrow, just enough to attenuate maybe 6 db the splatter from the louder station and not loosing audio quality.

When you tune around you have the impression that the filter shape suites perfectly for MW, making the audio quality very pleasant. I would never sell it. If you are interested i’ve captured a short clip while playing with it outdoor on 7 MHz band, hearing ham stations on AM, SSB and CW.

Pay attention to how loud and clear i was hearing stations at 400 Km in AM:

Click here to view on YouTube.

Many thanks for sharing your thoughts, Juan!

I agree with you completely. At least here in countries where MW stations are spaced at 10 kHz, I find the RF-2200 a mediumwave DX boss!

I’m constantly amazed with the RF-2200’s MW sensitivity and selectivity–and low noise floor. That combo, along with the filter shapes Juan mentions and the excellent built-in full-fidelity speaker make for a proper listening experience.

As I’ve said before, the RF-2200 is a radio with fortitude and purpose.

The only place I’ve ever really searched for an RF-2200 is eBay. I like eBay, because if you receive a faulty unit, you can typically return it or have some sort of recourse (as long as the seller accepts returns).

I would only buy an RF-2200 (or any vintage solid-state rigs) from a seller that has near 100% ratings with a number of radio sales in their past. That is, if you’re seeking a working unit.

Though the RF-2200 is vintage and thus might eventually need repair. It’s ultimately reparable by a skilled technician, though. My buddy Vlado, for example, has repaired 2200s in the past–indeed, we cracked my RF-2200 open a few months ago to clean contacts.

Panasonic RF-2200s typically cost between $175-300 for one that’s mechanically and cosmetically sound. Of course, NOS units go for much more and units with faults sell for much less.

I expect my RF-2200 will outlast me!

Click here to search for RF-2200s on eBay.

Spread the radio love

Dave’s Yaesu VX-3R notes

1 Reply

Many thanks to SWLing Post contributor, Dave Zantow, who shares the following in reply to my recent post about the Yaesu VX-3R:

The VX-3R has a tiny internal ferrite bar for AM/mediumwave broadcast listening.

Yes, it’s indeed true the VX-3R is discontinued and is already pretty much sold out.

Rumors of a VX-4R has been around for years and let’s hope that happens–?? Have a sneaky feeling that IF it come to pass it will include C4FM digital (Yaesu Fusion) ?? I actually preferred the older VX-2R over the 3, but that was me (have reviews on both models on my web page). But my two VX-3R test samples were very early production (lots of QC bugs).

http://webpages.charter.net/n9ewo2/vx2r.html
http://webpages.charter.net/n9ewo2/vx3r.html

As I cover on my news page Yaesu is coming out with a number of new HT’s soon.

Sorry no word of a tiny VX-3R replacement yet. Will of course cover that IF and when it happens on the web page.

http://webpages.charter.net/n9ewo2/news.html

Thank you, Dave! I’ll certainly consider purchasing the VX-4R (if it comes to fruition) if for no other reason than to compare it with the VX-3R.

Again, I love this little all-in-one micro-sized HT as an Everyday Carry radio. If you’re interested in the VX-3R, your best bet will be to check with radio retailers like Universal Radio and Ham Radio Outlet for used/demo units. Of course, as I’ve mentioned before, you might also follow a VX-3R search on eBay where I recently purchased an open box unit for $119 shipped.

Spread the radio love

RCI Sackville land sold to Mi’kmaq group

1 Reply

View of the western cluster of curtain antennas from the roof of RCI Sackville’s transmissions building. I took this photo in 2012 while the site was still in operation. (Photo: The SWLing Post) –Click to enlarge

(Source: CBC News)

A Mi’kmaq group has bought the land outside Sackville where 13 Radio Canada International towers stood for decades, CBC-Radio Canada confirmed Friday.

Five years after the Tantramar Marsh site was put up for sale, the New Brunswick non-profit Mi’gmawe’l Tplu’taqnn bought it for an undisclosed price.

“This transaction closes the book on an interesting chapter for CBC/Radio-Canada and Canadian broadcasting in the world of international shortwave broadcasting,” CBC’s Martin Marcotte wrote in an email.

A long broadcast history

The shortwave service ran for 67 years, and the site’s towers facilitated the service around the world until budget cuts in 2012.

The 90-hectare property was initially listed with the towers, to avoid the high cost of dismantling the facility, but in 2014, CBC began dismantling the towers in hopes the blank slate would entice more buyers.

“It’s tough to take something down that served such a purpose for the country, you know, during the Second World War,” Larry Wartman, CBC’s senior manager of transmission operations for Western and Atlantic Canada, told CBC News in 2014. “There’s just not that many of them around the world anymore.”

Building the future

The New Brunswick Mi’kmaq group Mi’gmawe’l Tplu’taqnn purchased the land Thursday but has yet to announce any plans or comment on the purchase, other than to confirm it. The non-profit group’s members are the nine Mi’kmaq communities in the province.[…]

Click here to read the article on CBC News.

Spread the radio love