Tag Archives: SDR

SDRs processing Fast Radio Bursts from distant universe

The Green Bank Telescope (Source: NRAO)

Many thanks to SWLing Post contributor, Ed, who shares a link to the following article at Breakthrough Initiatives:

Green Bank Telescope observations of a dwarf galaxy three billion light years away reveal 15 bursts of radio emission. This is the first time bursts from this source have been seen at these frequencies.

San Francisco – August 29, 2017 – Breakthrough Listen – the initiative to find signs of intelligent life in the universe – has detected 15 fast radio bursts emanating from the mysterious “repeater” FRB 121102. Fast radio bursts, or FRBs, are brief, bright pulses of radio emission from distant galaxies. First detected with the Parkes Telescope in Australia, FRBs have now been seen by several radio telescopes around the world. FRB 121102 was discovered in 2012, on November 2nd (hence its name). In 2015, it was the first FRB seen to repeat, ruling out theories of the bursts’ origins that involved the catastrophic destruction of the progenitor (at least in this particular instance). And in 2016, the repeater was the first FRB to have its location pinpointed with sufficient precision to allow its host galaxy to be identified. It resides in a dwarf galaxy about 3 billion light years away from Earth.

Attempts to understand the mechanism that generates FRBs have made this galaxy a target of ongoing monitoring campaigns by instruments across the globe. Possible explanations for FRBs range from outbursts from rotating neutron stars with extremely strong magnetic fields, to more speculative ideas that they are directed energy sources used by extraterrestrial civilizations to power spacecraft.

Breakthrough Listen is a global astronomical initiative launched in 2015 by Internet investor and philanthropist Yuri Milner and cosmologist Stephen Hawking. As part of their program to observe nearby stars and galaxies for signatures of extraterrestrial technology, the Listen science team at UC Berkeley added FRB 121102 to their list of targets. In the early hours of Saturday, August 26, UC Berkeley Postdoctoral Researcher Dr. Vishal Gajjar observed the location of FRB 121102 using the Breakthrough Listen backend instrument at the Green Bank Telescope in West Virginia. The instrument accumulated 400 TB of data on the object over a five hour observation, observing the entire 4 to 8 GHz frequency band.[…]

Analysis by Dr. Gajjar and the Listen team revealed 15 new pulses from FRB 121102. As well as confirming that the source is in a newly active state, the high resolution of the data obtained by the Listen instrument will allow measurement of the properties of these mysterious bursts at a higher precision than ever possible before.

The observations also show for the first time that FRBs emit at higher frequencies (with the brightest emission occurring at around 7 GHz) than previously observed. The extraordinary capabilities of the Listen backend, which is able to record several gigahertz of bandwidth at a time, split into billions of individual channels, enable a new view of the frequency spectrum of FRBs, and should shed additional light on the processes giving rise to FRB emission.
When the recently-detected pulses left their host galaxy our entire Solar System was just 2 billion years old. […]

The new results are reported as an Astronomer’s Telegram at www.astronomerstelegram.org/?read=10675 and will be described in further detail in an upcoming scientific journal article.

Breakthrough Listen is a scientific program in search for evidence of technological life in the Universe. It aims to survey one million nearby stars, the entire galactic plane and 100 nearby galaxies at a wide range of radio and optical bands.[…]

The linked animation shows 14 of the 15 detected bursts in succession, illustrating their dispersed spectrum and extreme variability. Capturing this diverse set of bursts was made possible by the broad bandwidth that can be processed by the Breakthrough Listen backend at the Green Bank Telescope:

https://storage.googleapis.com/frb121102/FRB121102_Cband_GB.gif

Click here to read the full article at Breakthrough Initiatives.

Spread the radio love

Solar Eclipse 2017: In the path of totality

A portion of the PARI campus

Tomorrow, we will be experiencing a total solar eclipse here in the mountains of western North Carolina.

Instead of enjoying the eclipse at home, I will be volunteering as a docent at the Pisgah Astronomical Research Institute in Rosman, North Carolina. Post readers might recall PARI as it was the location of our 2015 PARI DXpedition.

One of PARI’s 26 meter radio telescopes.

PARI is expecting at least 1,000 visitors tomorrow, from a number of countries. Many are scientists, astronomers, and guests who want to be in the path of totality.

On the PARI campus, we will be in totality for about 1 minutes, 47 seconds.

What makes the event truly special for PARI is that this is the first time in history a world-class radio astronomy observatory has been in the path of totality. To say the PARI astronomers are excited is simply an understatement. All four of PARI’s telescopes will be trained on our local star and gathering copious amounts of data.

If you don’t live in the path of the Eclipse, I invite you to check out PARI’s YouTube channel where they will host a live stream:

Click here to watch on YouTube.

Gathering spectrum

I will also be gathering data of my own during the event.

I will remotely record the entire mediumwave (AM broadcast) band several hours before, during and after the eclipse. I will also set up a separate SDR to record either the 31/30 meter bands and my buddy, Vlado (N3CZ) is kindly using his SDRplay RSP1 to record from 6 MHz – 8 MHz.

What do I expect to see/hear in the spectrum recordings? Certainly a drop in noise. If I’m lucky, I also hope to hear some DX anomalies–hopefully a signal or two that I wouldn’t normally here in the middle of a summer day.

I don’t expect any dramatic results (though I would love to be proven otherwise!) since the ionosphere takes time to change states. My buddy Mike (K8RAT) likens it to an oven: it takes time for it to heat up to the desired temperature, and it takes time for it to cool down as well. I’m not so sure the shadow of the moon, which moves at a good clip, will be persistent enough to change the state of the ionosphere in any meaningful way.

If it does, I’ll be there to record it!

There are many other radio related experiments happening during the solar eclipse. A notable one that you can even help with is the 2017 Ham Radio Eclipse Experiment.

SWLing Post contributor, Dan Srebnick also suggests a few stations you might try catching on the AM broadcast band. Dan notes:

Something to do during the solar eclipse on Monday. There are 13 clear channel AM stations along the path of totality. Give a listen for them:
[LIST OF AM CLEAR CHANNEL STATIONS]
kHz CALL Location Eclipse UTC
—— ——- —————- ————–
650 WSM Nashville, TN 18:28
670 KBOI Boise, ID 17:27
750 WSB Atlanta, GA 18:36
840 WHAS Louisville, KY 18:27
880 KRVN Lexington, NE 17:57
1030 KTWO Casper, WY 17:43
1040 WHO DesMoines, IA 18:08
1110 KFAB Omaha, NE 18:04
1110 WBT Charlotte, NC 18:41
1120 KPNW Eugene, OR 17:17
1120 KMOX St. Louis, MO 18:18
1190 KEX Portland, OR 17:19
1510 WLAC Nashville, TN 18:28

Kudos to Bob WB4APR (of APRS fame) for producing this list.

Post readers: Will you be in the path of totality or do you plan to enjoy a partial eclipse? Have you ever experienced a total solar eclipse?  What are your plans if any? Please comment!

Spread the radio love

SDRplay lowers RSP1 price to $99.95 US

The SDRplay RSP software defined radio

(Source: SDRplay Press Release via Jon Hudson)

SDRplay are pleased to announce a price reduction for their entry-level SDR receiver, the RSP1 to $99.95 USD making it the most competitive mid-range SDR to include reception down to low frequencies without the need for an upconverter.

The RSP1 provides general coverage receiver and panadapter capability from 10 kHz to 2 GHz. As well as providing SDRuno SDR software, support for popular 3rd party packages like HDSDR, SDR-Console and Cubic SDR is provided. Recent availability of an SD Card image makes for easy set up on a Raspberry Pi.

Click here to visit SDRplay online.

Click here to read our RSP1 review.

Spread the radio love

PantronX Titus II DRM receiver June 2017 update

Many thanks to SWLing Post contributor, Ed, who writes:

Here’s an update on the PantronX Titus II DRM boombox from Mike at PantronX:

“We are first fulfilling large orders from international broadcasters. Individual orders most likely are late fall.

If you preordered someone will contact you when the order comes up. Sorry for the delays but demand has been almost overwhelming.

Thanks for your continued support.”

Thanks fo sharing this update with us, Ed!

Spread the radio love

KiwiSDR network updates include native HF FAX

Many thanks to SWLing Post contributor, Mark Fahey, who writes:

Lots happening with KiwiSDR – there are now over 130 live 0-30MHz fully controllable SDRs scatted around the world some in really interesting locations. Using Kiwi’s around the world is like being able to go on a exotic DXpedition any time.

Here (attached graphic) is a map of the current locations, you can see the live status of online receivers here:

http://rx.linkfanel.net

and as a list of receivers here:

http://kiwisdr.com/public/

KiwiSDRs now include HF Fax reception natively, just select Fax in the Extension menu, select the part of the world you are interested in and the Kiwi will tune the weather fax frequency and receive the weather fax all natively (no extra software needed) – too easy!

Lots more great things happening.

Here is the latest news…

http://www.kiwisdr.com/#id-31-may-17

Cheers,
Mark

Thank you for the update, Mark! I had no idea the KiwiSDR app had an HF Fax extension. After reading your message, I loaded a KiwiSDR session in Europe and used the Fax feature. It couldn’t have been easier. The screen grab (above) came from my first attempt.

The KiwiSDR network is truly amazing. I use it all the time–especially if there’s an important broadcast happening and I can’t easily receive it at home or while traveling. As an example, during the recent French elections, I listened to results roll in on France Inter mediumwave from a KiwiSDR in Italy. It felt like being there.

My one feature request would be that the KiwiSDR app include some form of native broadcast recording like the WebSDR at U Twente.

Many thanks for the update, Mark!

Click here to read about Mark’s KiwiSDR installation.

Would you like to host your own KiwiSDR?

The whole system only costs $299 US. The KiwiSDR site has a list of distributors around the world.

Amazon has units in stock at $299 US shipped.

I would have purchased a KiwiSDR ages ago–during their Kickstarter campaign–if I only had the Internet bandwidth at home to support it. My Internet speeds are likely lower than anyone else here in the SWLing Post community. One of the compromises living in a relatively remote spot with no RFI. 🙂

Spread the radio love

ADS-B for SDRplay RSP1 and RSP2 now available

I was very happy to see the following message from Jon Hudson at SDRplay this morning:

“ADS-B for both RSP1 and RSP2 is now available for the Raspberry Pi 2 & 3 – you can get the software from downloads – http://www.sdrplay.com/downloads

If you are an RSP2 user, make sure you use Antenna Port B when running ADS-B.”

This is great news as I’ve had a number of readers ask if the RSP series SDR was compatible with the DUMP1090 ADS-B system.

The SDRplay RSP2

If you have an RSP1 or RSP2 and either a Raspberry Pi 2 or Pi 3, this will be an easy, accessible way to experiment with ADS-B.

In the long run, however, I’d never devote an RSP as a dedicated ADS-B feeder. Why? The RSP is a very versatile, full-featured SDR and I wouldn’t want to tie it up with such a relatively routine, simple task.

Instead, I’d give ADS-B a try with the RSP, and if I liked it, I’d purchase this inexpensive FlightAware RTL-SDR dongle with a built-in 1090 MHz bandpass filter for $18.95.

Click here to read my recent article about setting up a FlightAware ADS-B feeder.

I’m always so happy to see such active application development from “Mom and Pop” companies like SDRplay and AirSpy. Just more ways to put your SDR to work for you!

Spread the radio love

SDRplay: API 2.10 released

(Source: Jon Hudson, SDRplay)

API 2.10 has been released. We recommend you update your system to this latest version. We are constantly improving our software and updating to the latest version will allow us to provide you with the best possible support.

Users can simply go to our Downloads page on: http://www.sdrplay.com/downloads/ and download their choice of software again if they use SDRuno, HDSDR or the EXTIO plugin) to automatically pick up the the latest API. Alternatively you can just download the SDRplay API and replace your older copy wherever it sits in your system for these and other programmes.

Spread the radio love