Tag Archives: Australia

Review of the Digitech AR-1780 portable shortwave radio

The following review first appeared in the October 2017 issue of The Spectrum Monitor magazine.


Earlier this year one of my readers in Australia noted the addition of the Digitech AR-1780 to the product offerings of the Australia and New Zealand-based retailer Jaycar.

One thing I’ve learned over the years is that there are few in-country sources of shortwave radios in both Australia and (especially) New Zealand. Jaycar, in a sense, represents what RadioShack and The Source have offered in the US and Canada––a more accessible electronics retailer with some shortwave radio selection.

Jaycar sells radios badged with the name Digitech. Unfortunately, none of Jaycar’s recent additions––and there have been a few––have been enormous hits among serious radio enthusiasts. The company currently offers five Digitech models: the AR1736 ($18.95 AUD), AR1721 ($25.95 AUD), AR1748 ($129.00 AUD), AR1945 ($159.00 AUD), and now the AR1780 ($129.00 AUD).

The Jaycar models are either very cheap sub-$30AUD digital portables, or pricier large portables with a form factor similar to the Grundig S350DL and S450DLX, or the C.Crane CCRadio-SW. The new AR1780 fits somewhere between––a compact portable that promises a compliment of features tailored for the radio enthusiast.

In this review, we’ll take a close look at the AR1780, starting with its feature set.

Features

What appeals to me about the Digitech AR1780 is the amount of features provided by such a compact, traveller-friendly form factor.

Here’s a comprehensive list of the AR1780’s features and specs:

Frequency coverage:

  • FM 87.5 – 108 MHz
  • MW 522 – 1620 kHz or 520 – 1710 kHz
  • SW 1711 – 29,999 kHz
  • LW 150 – 450 kHz
  • AIR 118 – 137 MHz

Modes:

  • FM (including RDS)
  • AM
  • Single Sideband

Selectable Bandwidths:

  • AM mode: 6, 4, 3, 2.5, 2, & 1.81 kHz)
  • SSB mode: (4, 3, 2.2, 1.2, 1 & 0.5 kHz)

Convenient features:

  • Sleep timer
  • Clock/Alarm
  • Thermometer
  • Signal strength meter
  • Squelch control
  • Voice/Music selectable audio filter
  • Dedicated fine tune control
  • Headphone jack (3.5 mm)
  • Key lock button
  • Key beep on/off
  • Tuning knob and tuning step up/down buttons
  • Display button cycles through alarm, time, temperature, and signal strength
  • FM mono/stereo selection
  • Backlight button
  • Selectable 9/10 kHz regional MW tuning steps
  • Flip-out backstand

Power source: 7 VDC or 4 x AA cells (not included, can be internally charged if NiMH cells)

Antenna: Built-in telescopic and 3.5mm socket for external antenna

Weight: 253g/0.56 lbs (excluding batteries)

Dimensions: 150(W) x 95(H) x 30(D)mm

Operation Manual

The Digitech AR1780 ships with a small user manual. In fact, other than the hand strap, the user manual is the only additional item in the box besides the radio itself.

The manual is quite thin––slightly smaller in height and width than the AR1780––and only contains about eight front-and-back mini pages.  Although readable, it’s littered with grammatical and punctuation errors.  While a manual is certainly a welcome reference item with this feature-packed radio, this manual comes up short, lacking detailed explanations of features and even leaving some out altogether:  it does not, for example, offer any explanation on the use of the excellent squelch control, nor does it fully explain the station memory set on multiple memory pages––!  Rather unfortunate, as these features deserve a clear explanation.

First impressions

The Digitech AR-1780, like many DSP-based portables, includes a handy temperature display which can be toggled for Celsius or Fahrenheit.

I really appreciate the modest, portable form factor of the AR1780, so it had that going for it before I even opened the box. I travel with portable radios a lot, so the compact body of the AR1780 is very appealing. It’s not as compact as the C. Crane CC Skywave series, or the Grundig G6, but is much smaller than my Tecsun PL-660 and PL-880, or my Sony ICF-SW7600GR.

Comparing size: The Tecsun PL-680 (top), Digitech AR1780 (middle), and the C. Crane CC Skywave (bottom)

Unlike the radios mentioned above, the AR1780 does not include some sort of protective case or bag. I believe this is an omission for a radio aimed squarely at the traveler.

Fortunately, the plastic chassis of the AR1780 feels substantial enough. With the key lock engaged, the only likely problem that could arise from having no protective case is damage to the display, such as scratching.

The buttons all have a tactile feedback and seem to respond quickly enough, save powering up the radio, engaging the SSB mode, or changing bands, each of which takes a couple of seconds to engage.

I especially like the fact the AR1780 has, on the right, a dedicated multi-function tuning knob. One can turn the tuning knob to scan frequencies or press it to cycle through fast or slow tuning steps (or to turn off this knob’s function entirely).

The AR1780 also has a dedicated fine tune control––a tuning wheel just beneath the main tuning knob also on the right side of the radio (see image above).  The only odd quirk about this is that this is where most radios have a volume control. Being a creature of habit, many times I’ve inadvertently shifted frequencies when I simply wanted to turn up or down the volume! The volume control, meanwhile, is in the same position on the left side panel of the radio between the antenna and earphone jack.

Speaking of volume, the AR1780 can provide plenty of it-––almost room-filling audio––via the internal speaker. Best yet, I like its balanced fidelity: mellow, with notes of bass, but ample treble when listening at moderate volume. The audio response curve is almost ideal for such a small package.

Something else worth noting: the AR1780 fits nicely in the hand. In general, it’s a great size for portable listening.

Major bonus for a travel radio: the AR-1780 is powered by standard, accessible AA cells. Note that the frequency range information silk-screened on the back stand is incorrect–shortwave coverage extends up to 29,999 kHz.

On the downside, however, one negative I noted shortly after beginning use: muting between frequency steps. In AM mode, this is not as distracting as in SSB mode. Muting makes band scanning a more tedious and fatiguing experience. Unfortunately, in this era of DSP-chip-based receivers, it seems muting has resurfaced.

Also, as with many other DSP portables, you can often hear “input” noise when pressing buttons. In other words, if while listening to one frequency I decide to key in another, I’ll hear a little clicking or buzz in the audio as each button is pressed. This is a very minor annoyance since it only happens when buttons are pressed, nonetheless, I thought it worth mentioning. I often wonder if it’s a result of poor shielding, something from which similar models suffer.

Performance

Over the past two weeks, I’ve had the AR1780 on the air almost every day. I’ve compared it with a number of receivers, but mainly The C. Crane CC Skywave, The CountyComm GP5-SSB, and even the Grundig G6. Below, I break down my notes by band.

AIR band

Let’s start with the “bonus” band: the VHF aviation band.

I’m sure there a number of readers who’ll never use this band, but I am not one of them. Personally, I really enjoy listening to aviation traffic, especially when I travel by air. Since the advent of the AIR band on ultra-compact radios, I no longer feel like I have to lug an additional scanner or receiver just to listen to the local air traffic control; that’s a plus.

Performance-wise, the AR1780 seems to be equal with the CC Skywave on the AIR band. Like the CC Skywave, the AR1780 has a squelch control––a fantastic feature, indeed. Simply tune the radio to your favorite aviation frequency, press and hold in the tuning knob on the side, and then use the tuning knob to adjust the squelch level. I find level 3 or 4 works well.

Note that unlike the squelch on the CC Skywave, the squelch control on the AR1780 actually carries over to the shortwave band. If you have squelch set on the AIR band, then switch to another band where squelch isn’t needed, you will need to turn it off. I never use squelch on the shortwave or mediumwave/AM broadcast bands; normal fading (QSB) can trick the squelch to open and close while tuned to a frequency.

Another convenient feature: press and hold the AIR button to start an automatic scan of the entire band. It’ll run through the AIR band once, saving any active frequencies. This is an ATS feature, so only makes one pass.  I wish you could set it to continuously scan the aviation band in a loop, much as a traditional scanner would.

FM

The AR1780 does a fine job on the FM band. It easily received my benchmark FM stations and even decoded the RDS from one broadcaster about 110 miles from my home base.

When listening to marginal FM signals, the AR1780 can be set to mono mode instead of default stereo mode.

What’s more, the internal speaker is exceptional at handling music––reasonably full fidelity given the limitations of the speaker size.

Longwave/Mediumwave

I’ll be the first to admit that longwave is not an easy band for me to evaluate. Here in North America, there are so few opportunities in the summer to log trans-Atlantic longwave stations. Indeed, unless I’m travelling to New England or the Canadian Maritime provinces, I never try to do so on a portable. I leave TA longwave DXing to my SDRs and tabletops back home where I can listen with the assistance of a large antenna.

But when I travel to Europe, longwave is a must, so my travel radio needs this capability. Based on my ability to receive benchmark LW airport beacons, I’m going to assume the AR1780 will do a fine job receiving European longwave stations while in Europe.

Likewise, the AR1780 should serve you well for both daytime and nighttime reception on mediumwave. Fortunately, switching between 10 and 9 kHz steps is simple: with the radio powered off, simply press and hold the “0” button to toggle between these steps.

On longwave and mediumwave, you can also use SSB mode (both upper and lower sideband). This could come in handy to reject adjacent signal interference on MW.

Likely an oversight on the part of the manufacturer, you can even engage the squelch feature, though why you would on LW and MW, I’m not sure.

Of course, with the fine-tuning control, you can navigate both bands in 1 kHz steps should you desire.

In short: the AR1780 is adequately sensitive on mediumwave and likely on longwave, as well. I wouldn’t rely on it for any serious DXing, but for a travel radio, it will serve you well.

Shortwave

Being first and foremost an avid shortwave listener, I spent the bulk of my AR1780 evaluation time on the shortwave bands and I’m overall very pleased with its performance.

In almost all of my comparisons on the shortwave bands, the AR1780 had a slight edge over its competition, namely, the CountyComm GP5-SSB, the Grundig G6, and the C. Crane CC Skywave.

To be clear, though, it was a very slight performance edge which I think may be attributed to the fact the AR1780’s telescopic antenna is longer, giving it a bit of gain over its competitors. For example, the AR1780’s antenna is about 17.7 cm (7 inches) longer than that of the smaller CC Skywave.

Still, placed on a table and not held in the hand, the AR1780 was able to pull in weak signals better than its competitors. I also compared it with the the Tecsun PL-680––one of my most sensitive shortwave portables––and, not surprisingly, the PL-680 outperformed the AR1780.

Again, I should stress that the sound from the AR1780’s internal speaker is more pleasant to listen to for extended periods than that of its smaller competitors.

SSB

Single sideband reception on the AR1780 is pretty impressive for a radio in this price class. On my particular unit, I found that the fine-tuning control was almost always needed to budge the frequency a few tenths of a kilohertz, even when I knew a particular signal was exactly on frequency. My Grundig G6 always had the same problem––indeed, sometimes in SSB mode, I had to listen “up” as much as 2 kHz on the G6.

The fine-tuning control works very effectively in SSB mode, nonetheless. Audio is quite pleasant, although the noise floor is not quite as low as it is on my larger portables like the Tecsun PL-680, PL-880, and the new S-8800. In my comparison tests, the AR1780 was slightly more sensitive than the CountyComm GP5-SSB, and about equal to that of the Grundig G6.

Click here to watch a short video of the AR-1780 in SSB mode.

In short? SSB is a welcome, capable addition on this compact portable.

Summary

Every radio has its pros and cons, of course. When I begin a review of a radio, I take notes from the very beginning so that I don’t forget my initial impressions. Following is the list I’ve formed over the time I’ve been evaluating the Digitech AR1780:

Pros:

  • Display is clear and easy to read
    • Time is always present via display button
    • RDS info scrolls on lower line
    • Backlit display easy to read
    • Viewing angle good, save from top
  • Dedicated fine-tuning control (even on FM)
  • External antenna jack
  • 9/10 kHz selectable MW steps
  • Time set is simple
  • Adjustable bandwidth in AM and SSB
  • Decent battery life from four standard AA cells
  • Audio from the built-in speaker has better fidelity than other radios in this size

Cons:

  • No bag or carry case
  • DC input voltage is an odd 7V
  • Muting between frequency changes, especially annoying in SSB
  • Sometimes keylock activates backlit display permanently
  • Scan function on AIR band doesn’t loop, it’s an ATS pass only
  • My AR1780 had incorrect information silk-screened on the back regarding frequency coverage
  • Minor: sluggish response when switching bands or modes

Conclusion

Is the Digitech AR1780 worth the price?  I think so. For $129.00 AUD (roughly $103 USD), you’re getting a full-featured radio that is, by and large, a pleasure to operate. It has its quirks, but so do so many ultra-compact portables in this price bracket. It’s certainly worth considering if you live in Australia or New Zealand.

I’d like the AR1780 to be a little more refined:

  • No muting while band scanning in AM or SSB modes
  • A proper scan function to accompany squelch on the AIR band
  • Squelch that doesn’t carry over when bands are switched

What I do think is impressive for this price:

  • Overall smooth audio from the internal speaker
  • Dedicated external antenna port
  • Dedicated tuning and fine-tuning controls
  • Useful screen which displays time and even RDS information
  • Sturdy, relatively long telescoping whip antenna

These are features that make the AR1780 stand out among radios in its price class.

Is it a benchmark performer?  No. But it does the job rather well for the price, and frankly, I think I’ll use this during travel occasionally, even though I have several other smaller portables.

Why?  Well, for one thing, this radio has better audio fidelity from the internal speaker than most of my ultra-compact portables. When I’m in a hotel and listening to a local radio station or even a shortwave broadcaster that’s punching through typical hotel RFI, I’ll appreciate the richer, mellower audio. Many of my smaller portables are lacking in this respect, thus I usually end up listening through headphones.

In fact, the only thing this little receiver lacks for us here in North America is NOAA weather/Environment Canada radio frequencies––but it’s no wonder it’s not included, as it was never intended for this market. But I’m glad the step size on the AM broadcast band can be switched to our 10 kHz spacing, which makes it useful here in North America.

In short, the AR1780 has exceeded my expectations––though admittedly, it may be because it was my first experience with a Digitech radio and I had heard so many lukewarm reviews of previous models.

Regardless, I’m happy I paid a small premium to order this little rig from Down Under.

If you’re a radio enthusiast in Australia or New Zealand who wants the best performance in a portable, and doesn’t mind a larger radio, then do splurge for the Tecsun PL-660, PL-880, or Grundig Satellite. There is a dedicated Tecsun distributor in New South Wales and there are always, of course, retailers on eBay and one of my favorites, Anon-Co in Hong Kong.

And if you’d like to order a Digitech AR1780 outside of Australia or New Zealand, you can purchase from this eBay seller, as I did.

Spread the radio love

4KZ Update: broadcasts will commence after transmitter repairs

Many thanks to SWLing Post contributor, Jerome van der Linden, who shares an update from 4KZ Station Manager, Al Kirton:

Hi Jerome

5055 is not on the air yet.

The transmitter failed and requires some inexpensive parts which are not available in Australia. They should be here any day from the US.

We hope to be able to commence in the near future.[…]

Best wishes

Al Kirton
Radio 4KZ

Thanks for sharing this update, Jerome. For more information about 4KZ, check out this previous post.

Spread the radio love

GfK survey concludes radio “most trusted media” in Australia

(Source: Radio Info via Nigel Holmes)

Radio leads the way as the most trusted media in Australia and is seen as the most credible source of news, according to a new survey by global research firm GfK.

The GfK Radio Insights study found 42% of respondents surveyed consider radio trustworthy, with a wide gap to TV (24%), online (18%) and newspapers/magazines (15%).

GfK’s General Manager Media, Dr Morten Boyer, said the results reflected high levels of trust in radio presenters and the live and human nature of radio, which made it a credible source of information for news, traffic information and emergency updates.

Click here to read full article.

Spread the radio love

KiwiSDR network updates include native HF FAX

Many thanks to SWLing Post contributor, Mark Fahey, who writes:

Lots happening with KiwiSDR – there are now over 130 live 0-30MHz fully controllable SDRs scatted around the world some in really interesting locations. Using Kiwi’s around the world is like being able to go on a exotic DXpedition any time.

Here (attached graphic) is a map of the current locations, you can see the live status of online receivers here:

http://rx.linkfanel.net

and as a list of receivers here:

http://kiwisdr.com/public/

KiwiSDRs now include HF Fax reception natively, just select Fax in the Extension menu, select the part of the world you are interested in and the Kiwi will tune the weather fax frequency and receive the weather fax all natively (no extra software needed) – too easy!

Lots more great things happening.

Here is the latest news…

http://www.kiwisdr.com/#id-31-may-17

Cheers,
Mark

Thank you for the update, Mark! I had no idea the KiwiSDR app had an HF Fax extension. After reading your message, I loaded a KiwiSDR session in Europe and used the Fax feature. It couldn’t have been easier. The screen grab (above) came from my first attempt.

The KiwiSDR network is truly amazing. I use it all the time–especially if there’s an important broadcast happening and I can’t easily receive it at home or while traveling. As an example, during the recent French elections, I listened to results roll in on France Inter mediumwave from a KiwiSDR in Italy. It felt like being there.

My one feature request would be that the KiwiSDR app include some form of native broadcast recording like the WebSDR at U Twente.

Many thanks for the update, Mark!

Click here to read about Mark’s KiwiSDR installation.

Would you like to host your own KiwiSDR?

The whole system only costs $299 US. The KiwiSDR site has a list of distributors around the world.

Amazon has units in stock at $299 US shipped.

I would have purchased a KiwiSDR ages ago–during their Kickstarter campaign–if I only had the Internet bandwidth at home to support it. My Internet speeds are likely lower than anyone else here in the SWLing Post community. One of the compromises living in a relatively remote spot with no RFI. 🙂

Spread the radio love

ACMA report on radio listening in remote Western Australia

Image: ACMA

Many thanks to SWLing Post contributor, Phil Brennan (VK8VWA), who shares the following:

I spotted this bit of research from the Australian Communications and Media Authority regarding radio listening habits of people living in remote Western Australia.

Click here to download report (PDF).

It shows that radio very much remains a big part of people’s lives in the bush, particularly AM radio. I’m sure these findings would be replicated in the Northern Territory where I live, but as you are only too aware, we’ve had our remote SW radio service axed by the ABC. Anyway, it may be of interest to you and your readers.

Thank you for the tip, Phil.  This is a pretty fascinating report. As you mention, the use of AM radio is quite heavy–no doubt due to the vast broadcast footprint. It’s this sort of report that should have been done prior to any decision about axing ABC’s NT shortwave service.

Spread the radio love

Western Australia: New low-power shortwave broadcaster seeking listener reports

Many thank to SWLing Post reader, Stefano Mollo–a licensed Australian broadcaster–who shares the following news:

Hi, Thomas,

I have started test transmissions from Perth, Western Australia, on 5,045 kHz, at 75 watts (300 PEP).

Stefano’s HF transmitter

For the time being, I am using the same audio of my other station–77.4 MHz FM–which you can also find and stream online here: www.77400.fm

My test transmission are on the air from about 7:00 pm to about 10:00 pm every evening, local Perth WA time (11:00 – 14:00 UTC).

Please direct listener reports and any enquiries to [email protected].

Thank you for sharing your news, Stefano!

Post readers: While 300 watts PEP is a modest broadcast signal, no doubt many in Australia, Oceania and Asia will be able to log Stefano’s station when conditions are favorable. During band openings, his signal might travel quite a distance.

Let’s help Stefano by contacting him with detailed listener reports!

Spread the radio love

The RAAF No. 4 Wireless Unit: Never to march, never to be mentioned

Many thanks to SWLing Post contributor, Neil Bolitho, who shares the following story in reply to our post yesterday Australian Codebreakers in WWII. Neil writes:

Never to march, never to be mentioned.

Since the end of the Second World War, many thousands of returned service personnel have marched at Anzac Day services throughout Australia.

My father never marched.

My father served in RAAF No 4 Wireless Unit, Central Bureau.

Central Bureau was under the direct command of General Douglas MacArthur, and was set up to detect, record, and translate all messages transmitted by Japanese forces in the Pacific.

Central Bureau was headquartered in Brisbane, but its Wireless Units worked in the field, moving forward with MacArthur, constantly intercepting and deciphering enemy messages.

As the war progressed, the units became so efficient in their work that they were monitoring all enemy radio traffic, and in fact frequently knew the Japanese intentions before the messages reached their intended destination.

The Wireless Units served throughout the Pacific islands providing vital information about enemy strengths and positions.

RAAF No 4 Wireless Unit was formed as a highly mobile unit, and served at Hollandia, Morotai, Labuan Island, and at Luzon, Philippines.

The U.S. High Command highly praised the Wireless Units of Central Bureau, stating that their work effectively shortened the War in the Pacific by at least two years.

At the end of the war, Central Bureau was dismantled. All personnel signed a lifetime secrecy order to not speak of their wartime activities.

No promotions applied. No evidence of their Central Bureau service was recorded, including overseas service. No medals were struck.

Family members, including children, were not told in any detail, of their father’s war experience.

It was only in the late 1990’s that the Australian government allowed information to be released.

In the early 1960’s, my father mysteriously went on an unexplained visit to Brisbane.
It was not until over thirty years later that I found out that he attended a twenty-year anniversary of his unit’s graduation.

I write this on behalf of the children and grandchildren of those Central Bureau personnel that served diligently and efficiently when called upon, and who, when the job was done, quietly went home. They are our heroes.

Indeed. Thank you so much, Neil, for taking the time to share your father’s story. We’re honored to post it here.

If you’re interested in WWII signal intelligence, here are a few fascinating posts from our archive:

Spread the radio love