Shortwave listening and everything radio including reviews, broadcasting, ham radio, field operation, DXing, maker kits, travel, emergency gear, events, and more
Wellbrook Communications will cease trading at the end of April 2023. This is due to retirement. I would like to thank everyone for their custom over the past 27 years.
No doubt, the venerable Wellbrook loop has helped thousands radio enthusiasts mitigate RFI/QRM and make it possible to once again DX from home.
Paul Walker’s battery-powered Wellbrook antenna in remote Alaska.
Many thanks to SWLing Post contributor, Pete Jernakoff, who writes:
[…]I’m hopeful that one of your readers might be able to suggest a solution to my problem.
I have an older Wellbrook Communications active loop antenna that is powered by a 12 v AC-to-DC, center pin negative, plug-in power supply (Stancor AC Adapter, was supplied with the antenna).
I’d like to power the antenna from a rechargeable battery in order to make the antenna portable and to eliminate any noise that might be emanating from said power supply (which, as an aside, runs very warm when in operation).
My problem is that I cannot find any rechargeable batteries (lithium ion preferred) with a center pin negative output. All of the ones that I can find online have center pin positive outputs (such as the TalentCell 12V/6000mAh rechargeable battery that I’ve purchased to power my other, more recently produced, Wellbrook Communications active loop antenna whose amp needs a center pin *positive* input).
Thanks in advance for consideration of my request. Btw, love your blog! I’ve been an avid reader of it for quite some time now.
Post readers: If you have any suggestions for Pete, please comment with any relevant links to help him make the purchase. I’m guessing Pete isn’t interested in re-soldering a coaxial plug for negative tip polarity at this point.
By the way, I used a photo of Paul Walker’s Wellbrook at the top of this post because I recall that when he lived in Alaska, he powered his Wellbrook loop with a rechargeable pack (and during the winter, I also recall he struggled to keep it warm enough to provide power for any length of time!). Perhaps Paul can comment.
Wellbrook Mag Loop antenna at Mark Fahey’s QTH near Sydney, Australia.
Many thanks to SWLing Post contributor, David Goren, who writes:
I need a new power supply for one of my Wellbrook loop antennas.
Do you know of good source for reliable ones? I forgot where I obtained the last replacement which worked fine until the wire attaching to the plug worked loose.
Here are the specs:
Plug in Class 2 Transformer
Model: DC1200300R
Input: 120VAC 60 Hz 9W
Output: 12V DC 300mA
manufacturer: Sandin Ltd.
Searching online delivers a mixed bag of somebody’s old power supply.
Post Readers: Any suggestions for David? I’m sure he’s particularly interested in a good quality power supply–one that’s quiet and would last a few years. Please comment and include links when possible!
Hi there, I’ve been rather preoccupied of late, initially with the brilliant Tecsun PL-310ET and latterly with the even more brilliant Eton Satellit. However, in the background (as always), I’ve been trying to catch transatlantic medium wave DX. My listening schedule is broadly based on shortwave DXing during daylight hours – when I’m not at work of course, typically a Friday afternoon or at weekends – and always with a portable. Evenings usually start off with a tune around the tropical bands, followed by setting up the Elad FDM DUO to run some medium wave spectrum recordings overnight. In the past few days though, my daylight DXing has been bolstered by my NooElec RTL-SDR and ‘Ham it up’ upconverter. I bought the device over a year ago and after some initial exceitement, it quickly became quite obvious that I needed a reciever with a bit more ‘oomph’! However, it’s actually proving very useful to view signals on a spectrum, even when I’m conducting most or all of my listening on a different (i.e. higher performing) receiver. Ultimately, the RTL-SDR is always going to be a compromise, with relatively limited sensitivity, but because by it’s very nature it has excellent selectivity, overall it’s a reasonable performer. My particular RTL-SDR performs quite well if a decent antenna is employed with it, such as a longwire or the Wellbrook ALA1530 active loop.
Anyway, back to the medium wave DX. In the past month or two, I’ve copied a number of stations from North America, with really nice signals, including WRCR Rampano – New York, WFED Federal News Radio – Washington DC, WENE – Endicott and WUNR – Brookline from Newton, Mass. I’ve also recorded a lovely interval signal from RAI Radio 1, Milano and further European signals from Magyar Radio, Budapest and Radio Slovenija 1, from Ljubljana. During the past 18 months or so of DXing, I have been mostly ignoring signals coming into Oxford from the continent. However, that changed a little after I stumbled across the RAI Radio 1 interval signal, which complete with the rather rousing Italian National Anthem, inspired me to dig out some more European DX. I’m actually finding European DX quite rewarding, particularly because it feels new again – not surprising since I haven’t listened to Europeans on medium wave for any length of time since the 1980s. I hope you enjoy the reception videos – embedded video and text links follow below and I wish you all the very best DX.
Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.
Hi there, I thought I’d share with you, three recent catches from Canada that I had not previously heard here in Oxford, UK, over the past 18 months of DXing. The first is VOWR, a religous station in Saint John’s, Newfoundland and Labrador. At the time of reception their TX power was 2.5 kW, thus a really pleasing catch. 800 kHz is such a difficult channel to DX in Europe due to heavy adjacent channel QRM, but the brilliant selectivity of the Elad FDM DUO operating via the FDM-SW2 software performed really well, producing mostlyy intelligble audio on LSB with an audio bandwidth filter of 2.1 kHz. Below is an embedded video and text link.
The next reception video is CHHA ‘Voces Latinas’ from Toronto on 1600 kHz. This was the biggest surprise because this channel at the start of the X-band is dominated by The Caribbean Beacon, Anguilla. In fact, I would go so far as to say I’ve never heard anything else but Anguilla on 1600 kHz. The only difference in this reception is that it occurred relatively late in the morning for me – around 7:45 am. To catch CHHA for the first time, with a very clear ID was great, I hope to hear them again soon. Below is an embedded video and text link.
Finally, a reception video of CBC Radio 1, transmitting on 1140 kHz. CBC are very often herad at my shack in Oxford, in fact, I see at least one carrier, usually with audio most evenings/mornings and often multiple signals are present across 600, 750 and 1400 KHz. However, their transmission from Sydney, Nova Scotia had never been copied previously and so this was a pleasing catch. Below is an embedded video and text link.
Thanks for reading/watching/listening and I wish you all great DX!
Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.
Hi there, after the first set of recordings were analysed, the score was 4-3 to the ICF-2001D, demonstrating how similar these two great receivers are in overall performance. There were a copule of notable differences however. The synchronous detection circuit on the ICF-2001D allows the user to effectively tune through a signal in 01. kHz steps, whilst the receiver automatically locks onto either the upper or lower sideband, depending on the frequency offset. The ICF-SW77 synchronous detection system differs in that the user must tune the signal and select the sideband. The results of this test confirmed that whilst the ICF-2001D almost always retained SYNC lock, the ICF-SW77 was very prone to losing lock, which of course affected the audio quality in many cases. The other issue was with the ICF-SW77 in that the narrow audio bandwidth filter often seemed to deliver ‘muddy’ audio. Whilst this feature proved to be excellent in terms of mitigating adjacent channel QRM, it also reduced signal clarity/ audio discernibility a little too much in my opinion. However, overall, sensitivity and selectivity was very similar between both radios – in fact, one recording had to be judged a draw (Radio Bandeirantes, Sao Paolo on 9645.4 kHz) – I simply couldn’t split them. Part two of the reception testing follows, using signals from Canda, DR Congo, Brazil, Cuba and Peru.
I hope you enjoy the recordings – text links and embedded videos follow below:
Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.
Hi there, here is a selection of North American medium wave stations logged in Oxford UK, over the past couple of weeks using the Elad FDM DUO and Wellbrook ALA1530 active loop antenna (indoors). A quick list of stations logged follows below – with URL links which will take you directly to the respective reception video on the Oxford Shortwave Log YouTube channel. Embedded reception videos follow further below. A subsequent posting will follow detailing some South American stations logged recently on medium wave, using the same Elad/Wellbrook set-up. Thanks for watching/ listening and I wish you all great DX.
Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.
Spread the radio love
Please support this website by adding us to your whitelist in your ad blocker. Ads are what helps us bring you premium content! Thank you!
