Monthly Archives: August 2020

A review of the Ocean Digital WR-26 FM, DAB, Internet and Bluetooth radio

A few weeks ago, I was contacted out of the blue by a company I’d never heard of: Ocean Digital. They asked if I would be interested in reviewing one of their radios.

I almost deleted their message out of habit because (no kidding) I get at least one or two messages like this from retailers and manufacturers per week–often more. I checked out their website and could quickly see that they specialize in a variety of digital WiFi radios with Bluetooth, FM, and DAB. A quick search on Amazon and I could see a number of Ocean Digital models. I replied back and the company representative mentioned that it was one of my trusted friends and SWLing Post contributor who recommended that they reach out to me. So I read through their catalog of radios and selected their most affordable model: the WR-26. Ocean Digital sent a sample WR-26 at no cost to me.

I picked the WR-26 because, in terms of features, it packs a lot for a $75-80 US radio. I also love the portable size and built-in rechargeable battery.

WIth that said, it’s also a very simple radio. There was no need to reference the owner’s manual for basic operation.

Look & Feel

The WR-26 is compact, lightweight and sports an internal rechargeable battery pack with a Micro USB connection.

It has a front-facing internal speaker, and on top a small backlit display and eight function buttons:

  • On/Off
  • Home
  • Favorites
  • Left/Right arrows (for selecting and backing out of menu items)
  • Up/Down arrows (for tuning, and stepping through selections)
  • OK button for making selections

On the back of the radio, there’s a telescoping antenna, Micro USB charging port, and a headphones jack.

Overall, I really like the clean and simple design. If I could change one thing, I would move the telescoping antenna to the top of the radio and make it recessed to better protect it when packed in a travel bag, for example. But in the end, this is a very minor criticism.

Audio

The WR-26’s built-in speaker provides well-balanced audio. In fact, readers who own late-model compact shortwave portables (like the XHDATA D-808) will recognize the audio characteristics of this small internal speaker that I assume uses an acoustic chamber to provide a better bass response. I’m always pleased to find compact radios that implement this type of speaker.

One interesting note: when you tune to an audio source–a stream or FM station for example–the volume fades in slowly after making the selection.

FM Radio/DAB

The WR-26 has a built-in FM tuner that functions quite well. It received all of my local radio stations and even a few further afield. The first time you turn on the FM radio, it will ask if you want to scan the band. If you initiate a scan, it will search for signals and auto store found stations in memory locations that you can shuffle through with the up/down arrows.

The WR-26 also displays RDS information on the screen–very nice!

To manually tune the WR-26, press and hold the ‘OK’ button until ‘Tuning’ appears on the bottom right corner of the display. Then use the left /right arrow buttons to adjust the frequency. Press and hold the OK when done to exit manual tuning.

I did not test DAB reception. I’m located in North America where there are no DAB stations on the air to test this functionality.

Bluetooth

Not much to say about Bluetooth other than it works. You can wirelessly connect your smart phone, tablet, or PC to the WR-26 and use it as an external speaker. If you’ve ever used a bluetooth device, you’ll find pairing a straight-forward, easy process.

WiFi Radio

Ocean Digital radios use an Internet radio station aggregator (click here to learn about aggregators) called Skytune. I don’t know if Skytune manages their own database of Internet radio stations, or if they rely on a larger, more established aggregator in the background. I suspect the latter.

To use WiFi radio, you must first connect to your local WiFi network. I connected to my smart phone’s personal hotspot without any problems. If you have a long WiFi password, you’ll need a little patience to enter it the first time. Entering the password requires scrolling through a long list of upper and lower-case letters, numbers, and symbols.

Like most WiFi radios, you can tune the station of your choice by selecting the WiFi radio function, then searching stations by location/region, popularity, genre, etc. Once you’ve selected a station, the radio connects and if you wish to save it to your favorites list, simple press and hold the heart button.

On devices like this, I always worry about WiFi radio functionality failing if the station aggregator disappears. In the case of the WR-26, you can actually program your favorite radio stations manually. You simply find the radio’s IP address on your network (the manual describes how to find this in the Configuration menu selection) then enter the radio’s IP address in a browser on a computer or device that is connected to the same WiFi network.

I took the screenshot above by connecting my laptop to my phone’s personal hotspot and directing it to the radio’s IP address.

I like this functionality because it means I can even connect to streaming sources not found in the Skytune directory like more obscure internet stations, LiveATC and scanner feeds.

I’ve reviewed a lot of WiFi radios and I find the WR-26 to be rather easy to use. So far, I’ve found all of the stations I normally listen to via their aggregator.

Summary

All-in-all, I really like the WR-26. For the price, it’s a very capable little WiFi radio and a good value.

What I really love is the portability of the WR-26. After charging the battery with a standard USB charger, you can listen to FM, DAB, Bluetooth or WiFi radio for hours. The audio is respectable and volume can be increased to be almost room-filling.

The WR-26 is small enough that you could actually pack it and take it on travels. If your phone has a personal hotspot, you’ll be able to use all of the WiFi radio functionality on the road. Since I’ve no experience with Ocean Digital devices, I always question product longevity so we’ll have to see how that plays out. It’s comforting, though, knowing that a trusted friend in the radio industry made the recommendation–he’s never lead me astray!

Click here to check out Ocean Digital’s website.

Click here to purchase the WR-26 and here to check out their other products on Amazon (these affiliate links support the SWLing Post).

Spread the radio love

Icom announces the new ID-52A/E HT with color display and Bluetooth

Many thanks to SWLing Post contributors, Paul and John (KC8RZM), who share the following press release from Icom:


Icom releases the ID-52A/E Amateur Handheld Transceiver with Color Display and Bluetooth® Communication

Icom Incorporated (Headquarters: Hirano, Osaka, Japan/President: Masataka Harima) releases the ID-52A/E*, VHF/UHF dual band digital transceiver that supports D-STAR (Digital Smart Technologies for Amateur Radio).
* ID-52A is the USA version, ID-52E is the European version

The ID-52A/E is equipped with a color display. The display size is increased to 2.3 inches (1.7 inches for the ID-51A/E), and a transflective display is used to achieve excellent visibility, even in bright sunlight. The transceiver also supports Bluetooth® communication as standard. Wirelessly connect to Android™ devices with ST-4001A/ST-4001I Picture Utility Software and RS-MS1A Remote Control Software installed, the optional VS-3 Bluetooth® headset is also available, for hands-free operation.

And the following features are enhanced from the previous ID-51A/E models. Simultaneous reception in V/V, U/U, V/U as well as DV/DV. Air band reception is expanded from VHF to UHF (225 to 374.995 MHz). The new model can be charged via micro USB connector. Audio output is significantly increased from 400 mW to 750 mW. The latest function of D-STAR enables you to send, receive and view saved photos on an installed microSD card using only the ID-52A/E.

In addition to the above, the ID-52A/E has a variety of attractive features such as the DR function with easy set-up, built-in GPS receiver, micro SD card slot, IPX7* waterproof construction, and Terminal/Access Point modes. The ID-52A/E is a product that leads the amateur radio digital communications with enriched features that satisfy any users, from beginners to even heavy users who want to fully enjoy D-STAR.

Main Features

  • 2.3″ large transflective color display that is easy to see outdoors
  • Bluetooth® communication as standard
  • Simultaneous reception in V/V, U/U, V/U and DV/DV
  • Enriched D-STAR® features including the terminal mode/access point mode
  • UHF (225?374.995MHz) air band reception
  • Significantly increased audio output power to 750 mW (400 mW for ID-51 series)
  • Accessories for the ID-51A/E such as battery packs and microphones can be used
Spread the radio love

Jorge’s Portable YouLoop Antenna Frame

Many thanks to SWLing Post contributor, Jorge Garzón (EB7EFA · EA1036 SWL), who shares the following guest post which was originally published on his @IberiaDX blog:


BricoDX: A YouLoop portable frame

by Jorge Garzón (EB7EFA · EA1036 SWL)

Youloop ‘in the forest’

One of the aerials I wanted to test was the Youssef Loop (YouLoop). I own a good passive loop antenna made by Tecsun (AN-200) but this is a mini one to use with portable receivers. A video showing the test of this ‘mini-loop’ can be seen in my YouTube channel.

My main loop for serious DXing is the Wellbrook 1530LN, but this is an active loop that easily beats any other passive ones. It’s close to be the perfect loop for me as I live in a rural valley with low noise level in the bands so I enjoy every minute of my listening sessions. However I wanted to test this newcomer passive loop, but wasn’t satisfied just hanging it from a pine tree branch, so I decided to bring about my DIY YouLoop portable frame project.

So I had to find something to get a rigid (but light) support for the loop itself allowing an easy rotation to achieve deep nulls. So… what could I built?

Fiberglass tubes, hooks and crossed arms.

I am professionally involved in the heritage and communication sector, so was easy for me to refit some dismissed display rolls where I found a 1,5 m thin supporting tube made in fiberglass that suited my needs. I cut a piece of 120 cm and then split it into 2x60cm, tightening both in the middle with a fine bolt. I placed two plastic hooks up and down of the vertical tube to hold both Youloop modules. The horizontal arm was lengthened with two bamboo meat skewers firmly inserted into the tube, allowing to slide onto it. Two small holes in the bamboo pieces were good enough to secure the cable with a short wire. All this was well fixed with clamps and vulcanized tape to an extra piece of vertical tube.

Bamboo meat skewer and tied cable.

Finally all this was inserted into a thicker aluminium tube and then into a wider one in order to fit everything into the tripod hole and then get a smooth and efficient rotation of the antenna. As a base I re-fitted an old heavy metallic tripod manufactured by Manfrotto (Italy) that I used it often for birdwatching day trips. I gave back an unexpected new life for this piece of metal, always in the field close to Nature!

The whole assembly can be easily transported in the car. Aluminium tubes slide one into the other, being rapidly detachable from the loop itself. This is a cheap and DIY project to get the maximum of this surprising and low noise passive loop.

This aerial gives its best performance when used in the field. There, QRM levels are low or non existent at all. It is a must to rotate it easily and then get sharp nulls. SMA connector nuts must be well tightened as they tend to loosen easily, but beware to force them as an extra twisting could damage inner connections.

This is the first post of a series called «BricoDX» where I will show how to refit or build accessories to get inexpensive and practical DIY projects for our listening sessions.


Many thanks for sharing your article with us, Jorge! That’s a brilliant loop support.

Readers: check out more of Jorge’s articles on his blog, @IberiaDX. Also check out his YouTube channel where he posts videos.

Spread the radio love

K9ZDK: Return of a Silent Key

Many thanks to SWLing Post contributor, Dan Van Hoy (VR2HF), who writes:

It was one of the most sublime moments in my 55+ years in radio. Almost every night I listen to shortwave station, KNLS in Anchor Point, Alaska, from my home in Hong Kong. KNLS broadcasts to Asia and the Pacific in English, Russian and Mandarin. The English broadcast is an amazing mix of secular and Christian music and topics, science, current affairs and more. It has something for both the seeker and the saint and is one of the most informative and entertaining shows on radio.

On this particular Monday evening, August 3, 2020, I tuned in late to the English broadcast from KNLS at 1000 UTC, but went on to listen to the remainder of the show. To my complete surprise as the show closed I heard “73 de K9ZDK” in Morse code and quickly wrote down that callsign. I assumed it was the engineer on duty, obviously a ham, having a little on-air fun with a big transmitter and antenna.

A few minutes later, I also heard “CQ de K9ZDK” at the beginning of the Russian program at 1100 UTC. So, I looked up K9ZDK on QRZ.com and found it was Zavier, a young ham who had become a silent key in June of 2019.

Zavier Klingensmith (K9ZDK) Silent Key

A little more online sleuthing and a phone call later revealed that his father, Thomas, KL0K, was at the controls of KNLS that night sending Zavier’s final CQ and 73 on this planet with at least 1 million watts of power (ERP: 100KW TX + 10dBd TCI curtain array) all around Asia and the Pacific. His call on CW was heard on every English, Russian and Mandarin show that evening over 16 hours of broadcasts (two Continental 100 KW transmitters). Wow!

In Zavier’s memory, Thomas has created a DIY kit for an Iambic Keyer and is offering it for FREE (though you might want to send some $$ for his production and mailing costs…my suggestion) to anyone who asks. Details can be found at Thomas’, KL0K, QRZ page. Maybe one of the first things you can send when your keyer is completed is,”K9ZDK de YOUR CALL, 73 OM!”

Thomas, our thoughts and prayers go out to you and your family. Thanks for the amazing on-air tribute to Zavier. I suspect he was listening with a big, big smile!

Dan VR2HF, Hong Kong
(K7DAN, USA)

Spread the radio love

Icom IC-705 approved by FCC: pricing and availability update

I’ve just learned via Universal Radio that the new Icom IC-705 has been F.C.C. approved and is scheduled to start shipping in the US “early Fall 2020.”

Shipping/Availability

Consensus from other sources in the industry is that Icom would like to start shipping the IC-705 by the end of September but have not committed to a specific date. I assume they’re being cautious due to Covid-19 logistics challenges.

I’ve no firm report on availability from the UK, Europe, or other countries as of yet, but I would have to assume they’re on a similar timeline.

Pricing: $1,299.95 US

Also, there is still no word on a firm US price. UPDATE: Steve (K9SWX) notes that Ham Radio Outlet has posted a retail price of $1,299.95 US. Gigaparts has also listed the price as $1299.95.

At time of posting, I couldn’t find other US retailers who have confirmed a price, however, you can expect that the price will consistently be $1,299.95 US. Manufacturers like Icom often cap any retailer price adjustments and (sometimes) extra perks when new products are introduced.

ML&S has a pre-order price listed at £1299.95 ( £1083.29 EXC. VAT). The price in Japan is roughly 124,800 yen.

Review

I have pre-ordered an IC-705 for review even knowing Icom early adopters pay a premium. I’m incredibly curious if the IC-705 will hold up well in the field and especially how it might compare with my other benchmark QRP transceivers.

We’ll continue to post updates as they become available. Bookmark the tag: IC-705

Spread the radio love

Radio Lavalamp: Sunday, August 9th and 16th, 2020

(Source: Pete Madtone)

Tune in to DJ Frederick’s Radio Lavalamp on Sunday 9th August 2020 (and repeated the week after) at 2200 UTC (11pm UK time) on 3955 kHz via Channel 292.The transmission from will feature One Deck Pete with a mix called The Purple Nucleus of Creation 002 featuring this great tune from Drowsii (below), Nayl, Tabitha Project, Seventh Soul & Homayoun Shajarian and Camille Murray. Tune in to “Your ethereal shortwave music station” on 3955 kHz or this link here when the time is right! #radiolavalamp #shortwavesnotdead

Spread the radio love

What’s in the shack here at SWLing Post HQ

The Mission RGO One transceiver is one model being evaluated for a review in The Spectrum Monitor.

Many thanks to SWLing Post contributor, Pete, who writes:

Thomas, I’m curious what radios you have in the shack now. I see lots of posts about various radios, but I wonder what’s in your personal collection and what’s being evaluated. You know what they say…”inquiring minds” and all that! If you don’t mind I for one would love to see even a basic list of your rigs.

Thanks for your question, Pete. Your’re right–I don’t really have an inventory listed here on the SWLing Post. In truth, my radio collection is pretty dynamic–radios come in and go out a lot due to testing, evaluations and reviews.

Here’s what’s in the shack at present. I’ll start with ones currently in my personal collection:

Transceivers

Icom IC-756 Pro Transceiver Dial

Receivers

Currently under evaluation

Vintage Valve/Tube Gear

Portable Radios

There are too many to list! (Ha ha!) In general, I keep any portable radio I believe represents the best in its price class. I rotate using and travelling with each radio as best I can, but honestly keep them in the shack for any new reviews as I’m always in need of comparison radios.   Here are some of the portables I believe I reach for most often (in no particular order):

  • Tecsun S-8800
  • Tecsun PL-880
  • Tecsun PL-660/PL-680
  • Tecsun PL-310ET
  • C.Crane CC Skywave
  • C.Crane CC Skywave SSB
  • Eton E1
  • Panasonic RF-2200
  • GE 7-2990

I also have a number of Handie Talkies, vintage solid-state portables, mobile radios and kit/homebrew radios and accessories like many radio enthusiasts.

This may seem like a lot of radios, but I have friends with collections that outnumber mine by orders of magnitude. In truth, if I didn’t evaluate and review radios, I’d have a much, much smaller collection because there’d be no need to keep reference radios on hand. I rely on comp models, however, to accurately gauge a radios performance when matched against a similar or “benchmark” model.

Thanks for your question, Pete.

So back to you!  Readers, please comment with what you have in your shack. “Inquiring minds” want to know! 🙂


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love