If you own a WiFi radio that relies on the Reciva aggregator, the company has given you an additional eleven weeks to enjoy your device before it effectively loses its ability to search an index of thousands of radio stations or possibly even recall your station memories. Indeed, if your radio relies on Reciva to gather stream info each time it’s turned on and tuned to a station, your radio may not function at all after Reciva has shut down.

We first posted a notice that Reciva would be closing down on November 2, 2020. That post received over 90 comments, mostly from readers who are incredibly frustrated.

Reciva has now changed the announcement at the top of their website stating that they will close on April 30, 2021.

In the meantime–and I suppose it goes without saying–do not buy a new or used WiFi radio that relies on Reciva as it will not function properly without the Reciva aggregator service. I’m sure there are a number for sale. Research the aggregator a WiFi radio uses before making a purchase.

Many thanks to SWLing Post contributor, Karl, for the tip!

Post readers: If you’ve found a Reciva work-around for your WiFi radio, please share details with us in the comments section.

Spread the radio love

Replacing the keypad on my Drake SW8

8 Replies

In 2019, I made an impulse purchase: a Drake SW8 tabletop receiver. As I mentioned previously, I’d always wanted an SW8. My buddy, David Goren, recommended this receiver ages ago, Each time I’ve stayed at his home in Flat Bush, he magically made an SW8 available as my bedside radio in the guest room. (That’s hospitality!)

After receiving my SW8 and putting it on the air, I realized it suffered from a common problem found in Drake receivers: a flaky keypad. Several of the buttons didn’t work reliably, or they made multiple contacts on each push, or they didn’t work at all.

What happens is, over time, the black carbon dot on the back of each pad on the rubber membrane simply wears out and no longer makes reliable contact. I believe a number of Drake receivers of the era used the same keypad style (though configured differently).

The seller didn’t realize this when he sold it to me and, frankly, I felt I got a pretty good deal regardless, so never bothered him about it.

A couple months later, I found out that Universal Radio uncovered a box of new old stock SW8 replacement keyboards, so I ordered one.

2020 got a little out of hand and I put off making the repair. I didn’t want to trouble my buddy, Vlado, who could have done this in his sleep. I knew I could handle a parts replacement as long as I didn’t need to de-solder the keypad from a circuit board (as one does with the SW2, I understand).

Tuesday, I cleaned off one of my radio shelves and found the replacement keypad. I looked at the SW8 and knew it was time to get’er done!

I first removed the encoder, volume, and tone knobs.

Next, I removed the top cover which is attached with five screws.

There are a number of multi-pin plugs that attach the front faceplate section to the main body of the radio.

I carefully removed all of them and noted their positions (taking photos at each stage really helps).

I quickly discovered that the keypad was under at least two more board layers.

I removed the main board which is held in place with three screws, then the board underneath which is also held in place with three screws.

To my surprise, the keypad, circuit board and two metal plates (in that order) are held in place with compression from the last board layer.

The keypad, circuit board and metal plates fell out quite easily.

While I had everything apart, I cleaned the inside. At some point, a wee bit of moisture must have accumulated near the bottom of the keypad. I’m guessing this was condensation, because it was so minimal and so localized.

I replaced out the old keypad with the new one. Should you ever do this procedure, take note that the keypad has holes that line up with dimples on the back of the SW8 face place–the keypad circuit board also has holes that line up with dimples on the back of the rubber keypad. Lining these up will insure a correct fit.

I then re-assembled the faceplate boards and reconnected it to the body of the radio. Unfortunately, one can’t really test to see if the replacement works until all of the boards have been re-connected and re-assembled–a good 10-15 minute process.

I tested the keypad and quickly discovered that number 9 and the bottom row of buttons were still a little flaky. After a little head scratching, it then dawned on me (after pulling the radio apart and reassembling it twice more!) that maybe part of the problem was left-over carbon/dust on the keypad circuit board.

I disassembled the radio again and carefully cleaned the keypad circuit board with some DeOxit (a radio enthusiast’s best friend).

Through a closer inspection of the board, I could see that some of the traces on the bottom of the board had corrosion. That really worried me because I’m not entirely sure how I could mend traces. I tested continuity, however, and they all passed.

I reassembled the SW8 for the fourth or fifth time, tested it, and the keypad performed perfectly! Woo hoo!

Not only am I incredibly pleased that I was able to sort this out on my own, but now I can dissemblable and reassemble the SW8 with the speed of an Indy pit crew.

I’m still a little concerned about those traces on the keypad circuit board and the new keypad’s overall longevity, but at least I’ve got the SW8 back in tip-top shape and on the air for now. I’ll explore a work-around if these parts ever fail again.

I do love this receiver and now have it set up in the shack where I can do some proper armchair SWLing.

Do you have an SW8?

I’m curious if any SWLing Post readers have an SW8 and especially if you’ve had to replace your keypad. Please comment!

Spread the radio love

Giuseppe discovers his homebrew rotating ferrite antenna works amazingly indoors and nulls RFI

4 Replies

Many thanks to SWLing Post contributor, Giuseppe Morlè, who writes:

Dear Thomas,

This is Giuseppe Morlè again. First of all, Happy New Year to you and to the whole SWLing Post community! I’ve been continuing the tests on my “T Ferrite” antenna for medium wave and the 160 meters ham meter band.

I tried the antenna inside my shack listening to Rai Radio 1 from Milan Siziano, about 800 km from me, on 900 kHz in the early morning after sunrise. The antenna, despite being inside, proved to be perfect for the cancellation of the electrical noise that I had around me.

Disconnecting the antenna from the receiver–a Sangean ATS-909–the noise occupied everything without being able to listen to anything. Putting the antenna back, the noise disappeared completely making the modulation re-emerge, with a weak signal, it was already day, but with good understandability.

The antenna, as I described in another article, is composed of 2 ferrites 12 cm long each, bought at ham fests, tied together with insulating tape.

For the two windings, I used a small section of cable used for telephone systems that is rigid enough to model perfectly on the ferrites–43 turns for the primary and 3 turns for the coupling link to the receiver. The variable capacitor is 850 pf.

I should mention that the magnificent W1VLF channel was my original source of inspiration for this antenna.

Check out the following video:

Click here to watch on YouTube.

That is amazing, Giuseppe! We often think of magnetic loops as the only choice for coping with urban noise and RFI, but ferrite bars–especially configured like yours–are a brilliant tool for indoor low-band listening. Thank you for sharing! We love your experiments.

Spread the radio love

FTIOM & UBMP, January 17-23

Loop-On-Ground Antenna Part 2: Tom upgrades his low profile, low noise, portable DXing antenna

8 Replies

Many thanks to SWLing Post contributor, TomL, who shares the following guest post:

Loop on Ground Part 2

by TomL

My previous Loop on Ground (LoG) experiment was useful which entailed connecting my Wellbrook loop amplifier to a 100 foot loop of speaker wire in the field at my favorite local Forest Preserve. It really brought in stations I had never heard before or strong stations in a more powerful way that made the audio really pleasant to listen to. This report will describe more experiments with smaller wire loops to see what the limitations are. 100 feet of wire is quite a lot of wire to mess around with especially in the cold weather or public places that do not have as much private space.

I don’t understand all the electrical interrelationships but a long posting at RadioReference.com had a great discussion about creating a 160-20 meters LoG receive-only antenna. It is 11 pages long but is worth reading how “nanZor” experimented with various parameters for general use. Kudos to him for documenting the findings as the design changed over time. You can find it here:

https://forums.radioreference.com/threads/160-20m-log-loop-on-ground.370110/

nanZor basically boils it down to a few guidelines.

Keep it on the ground. Lifting the wire more than an inch or two decreased the lower angle signal reception greatly.
Calculate the optimal length for one full wavelength of wire at the highest target frequency, say for example, the top of the 20 meter band (14350 kHz). 936/14.350 MHz * 0.9 velocity factor of simple insulated wire = 58.7 feet. You can round up to 60 feet, no big deal since this is broadband. The antenna should have a predictable reception pattern from 1/10th wavelength up to 1 full wavelength. Outside that range, the pattern gets “squirrely”.
Using a 9:1 balun seemed to be a little better than a 4:1 balun at the antenna feedpoint. This gets into things I cannot measure and has to do with rising impedance as a loop gets closer to ground level. I am not sure but I think my Wellbrook amp has a built in 4:1 balun and it seems to work just fine.
Make sure to use an RF Choke at BOTH sides of the feedline coax cable. He was adamant that the loop can get easily unbalanced and allow noise into the antenna and/or feedline and so it must be isolated and the ground allowed to “float” in his words.

Personally, I also wanted to use less wire and happened to have a length of 42 feet of landscape wire which should work well below 5 MHz with the Wellbrook amp engaged. Results were not bad even though on hard frozen ground. Signal levels were down a little compared to the 100 foot of wire. Here are a couple of examples, first one in a fast food parking lot with a grass field next to it and second at the usual Forest Preserve parking lot on a grass field. I made sure that my car blocked the view of the wire so people would not get nervous!

La Voz Missionaria, Brazil:

Voice of Welt from Issoudun France in Kurdish:

These are not necessarily “DX” but definitely good for SWLing. I like the signal strength with the amplifier inline at the antenna feedpoint and I did not have to use an RF Choke at the receiver side as was suggested.

I had a 75 foot long insulated wire and used that at the Forest Preserve parking lot on a couple of different days. Lower frequency signal strength and signal/noise ratio improved a little bit to be noticeable.

US Air Force HFGCS “numbers” station. Remote controlled from Andrews or Grand Forks bases (https://en.wikipedia.org/wiki/High_Frequency_Global_Communications_System), there was no way for me to know which of the 6 transmitters it was coming from:

BBC from Tinang Philippines in Korean:

Then, as nanZor suggested in his postings, I purchased a 9:1 balun/RF choke (it has both a balun and an RF choke built-in) from Ham Radio Outlet and put that in place of the Wellbrook amplifier.

I have not worked with it, but it is reported that the Nooelec.com v2 model is cheaper and works just as well – https://swling.com/blog/2019/10/the-nooelec-balun-19-v2/

Examples below with the 42 foot loop and 9:1 balun/choke, no amplifier:

KSDA, Agat Guam in English

WB8U doing a POTA activation of Leavenworth State Fishing Lake

VOLMET weather, Shannon Ireland

HCJB Quito Ecuador, probably in Quechua

As a side note, there is a posting that mentions low-angle DX is better with regions that have better “ground conductivity”, salt water being the best. I have no way of verifying this. See post# 126 by KK5JY Matt.

So, bottom line is that a Loop on Ground can be useful for pleasant SWLing and portable. Best to use it on grass, not asphalt. The loop amplifier is useful to get signal levels up if you have to use a smaller loop size but the signal/noise ratio will suffer due to its smaller aperture. And, warning, the public will find a way to trip over the wire no matter where you set it up (I may try putting the wire around my car if I can park on a grass surface and/or use the gaudiest, brightest neon green or orange wire I can find – they can’t trip over THAT, can they?).

TomL

Thanks, Tom, for sharing your update. Obviously, the LoG is working brilliantly. It’s amazing that you got such clear reception from the parking lot of a fast food restaurant. If you were using a vertical instead, I bet signals would have been buried in the noise.

I can also relate to people tripping over antenna wires. I remember one POTA activation recently (the first activation in this three park run) where I intentionally laid my counterpoise on the ground, off a foot path, in the brush and where I couldn’t imagine anyone ever stepping. Ten minutes into the activation and for no reason, someone walked off the path, into the brush, and it snagged them. Maybe I’m just a Ninja level trapper and never realized it!?

Thanks again for sharing the results of your LoG, Tom. Inspiring!

Spread the radio love

Hamvention 2021 has been cancelled

2 Replies

The following note was posted on the Dayton Hamvention website:

Unfortunately, several setbacks in the recovery from the COVID-19 pandemic make necessary the difficult decision to cancel Hamvention 2021. Hundreds of volunteers have been working to do everything necessary to bring this Hamvention to the many amateur radio enthusiasts and vendors who support the Dayton Hamvention.

Vaccine distribution both in the United States and around the world is lagging behind what was planned. In addition, the emergence of a more communicable form of the COVID-19 virus increases the potential for further public health problems in the next few months. We make this difficult decision for the safety of our guests and vendors.

Those who had their tickets, inside booths or flea market spaces deferred last year will be deferred again. Those who purchased 2021 tickets, inside booths or flea market spaces will also be deferred. If you desire a refund instead please email [email protected] and we will contact you.

Stay tuned for information about a QSO party for the 2021 Hamvention weekend. We are looking forward to the 2022 Hamvention!!!

Executive Committee, Dayton Hamvention 2021

Spread the radio love

Radio Waves: Old Goats Are Going Away, Pack Accused of Fraud, Post-Brexit Radio Imports, and a TV Drama About Murder of G0HFQ

4 Replies

Radio Waves: Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers. To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Dennis Dura, Ronald Kenyon, Michael Guerin, and the Southgate ARC for the following tips:

Commentary: “The Old Goats Are Going Away” (Radio World)

Broadcasters need to act to refill our ranks before the dial goes quiet

I see trouble ahead in our business in the shortage of qualified broadcast engineers.

I am not speaking of IT people. I am speaking of the guy in a T-shirt and jeans who gets to the transmitter, looks for the problem, reads the schematic, crawls inside the box and replaces R-16, R-17, C-232 and Q-4, and the music again blares forth.

We are losing those guys every day, and they are being replaced by the guy who walks into the site, looks at the box, grabs his cell phone, calls BE or Nautel to find which board to pull, and ships it back while waiting for a loaner to get the rig going.

I never thought of myself as an old-timer. Starting in the business in 1963, old-timers were the guys I learned from, mostly World War II graduates. They knew everything about audio and RF. I wished I knew a tenth as much as they did.

My first real bit of engineering was converting a 50 kW FM station to stereo in 1963. No one listened to FM then, I think there were 10 FM radios in the city and five were in Cadillacs owned by mob hit men.

I remember putting the stereo generator in an eight-foot rack. It took up four feet of the rack and had enough 12AU7s in it to heat the building. It had two outputs, one L+R that went into the phase modulator of the serrasoid exciter and the L–R output that went into the exciter about 200 multipliers later (the crystal frequency was multiplied 864 times).

It was a technical nightmare compared to mono FM. Getting two matched phased phone lines from the studio to the transmitter over three exchanges was another task. But we were stereo most of the time.

The FCC had a rule that if you weren’t transmitting stereophonic program material for more than a certain length of time, you had to shut the stereo pilot off so as not to mislead the 10 listeners by illuminating their stereo beacon. So the pilot on/off was wired into the old Rust remote control so the studio could turn it off when a monophonic recording of a symphony played.

Times changed; we wound up with RF STLs, stereo generators on a single chip, CD players, computers and lots of stuff made in foreign countries that wasn’t worth fixing or whose parts were not available, so when they broke they wound up on a shelf at the transmitter site.[…]

Voice of America CEO Accused Of Fraud, Misuse Of Office All In One Week (NPR)

Fresh crises and fresh challenges confront the Trump-appointed CEO of the parent of Voice of America, even with less than two weeks left of the Trump presidency.

To start, the Attorney General of the District of Columbia this week accused U.S. Agency for Global Media CEO Michael Pack of illegally funneling more than $4 million to his private documentary company through a not-for-profit that he also controls.

Then, five recent chiefs of Radio Free Europe/Radio Liberty – appointed under Democratic and Republican administrations – jointly warned President-elect Joe Biden that Pack poses “a long-term threat to the credibility and professionalism of the five networks” he oversees.

And now Pack is now being accused of trying to propagandize the Voice of America by a group of whistleblowers. They take exception to a planned appearance by Secretary of State Mike Pompeo at VOA’s Washington headquarters on Monday, just nine days before the Biden administration begins.

Pompeo will soon be out of his job. And it’s expected Pack will be replaced promptly as well. But he has sought to outlast his time in office by burrowing himself and conservative allies into boards that will steer Radio Free Europe/Radio Liberty, Radio Free Asia, and the Middle East Broadcasting Networks. The not-for-profit broadcasters are all funded by the federal government through USAGM.

Those networks, along with VOA and the Office of Cuba Broadcasting, collectively reach more than 350 million people across the world each week. They historically have demonstrated American pluralism by providing balanced coverage of news events and robust political debate, regardless of how it reflects on current government officials. The broadcasters are also intended to serve the citizens of nations which do not allow journalists to operate freely.[…]

Radio imports (Southgate ARC)

Now that the United Kingdom has left the European Union, we will see major changes in importing radio equipment.

Definitive information is scarce but imports from the UK can have VAT paid on purchase or depending on the retailer, VAT may have to be paid before delivery. If it comes via An Post, any charges will have to paid before the item is sent out for delivery.

The Post Office employees will not be collecting money at the door. Whether duty is also collected is not very clear, but some sources say that anything originating outside the European Union will attract duty as well as VAT. There may also be a handling charge.

John EI7GL has compiled a list of radio and electronic dealers based in the European Union on his blog page and would welcome any updates you can supply.[…]

TV drama about murder of radio ham G0HFQ (Southgate ARC)

On Monday, January 11, ITV will be broadcasting the first of a three part TV drama about the murder in June 1989 of Oxfordshire radio amateur Peter Dixon G0HFQ and Gwenda Dixon who were on holiday in Pembrokeshire

In the November 1989 Radio Communication magazine the RSGB asked:

Did you work GW0HFQ/M ?

As we’ve reported in previous editions of RadCom, Peter Dixon, G0HFQ. and his wife Gwenda were brutally murdered whilst on holiday in South Wales last June. Dyfed-Powys Police have asked us to say that they are still anxious to talk to anyone who had a contact with Peter whilst he was operating in Pembrokeshire as GW0HFO/M on 7 or 14MHz SSB. 28MHz FM/SSB or 144MHz FM. The dates between which they’d like you to check your logbooks are 19-29 June 1989.

Dyfed-Powys Police believe that Peter Dixon had a contact with another mobile station in the area on 28MHz FM on the morning of Wednesday 28 June.

The drama will be shown on ITV at 9pm on Monday, January 11, details at
https://www.itv.com/presscentre/ep1week2/
pembrokeshire-murders

A description of the murder is at
https://www.nickdavies.net/1992/06/27/the-tantalising-mystery-of-a-murder-in-pembrokeshire/

The October 1989 issue of 73 magazine carried a report, see page 13
https://worldradiohistory.com/Archive-DX/73-magazine/73-magazine-1989/73-magazine-10-october-1989.pdf