Monthly Archives: January 2025

Carlos Explores Japan’s Radio Nikkei: A Unique Shortwave Listening Experience from Brazil

Many thanks to SWLing Post contributor Carlos Latuff, who shares the following guest post:

Exploring Radio Radio Nikkei

by Carlos Latuff

It’s been a while since I listened to Nikkei Radio, a Japanese commercial broadcaster that operates on shortwave for a domestic audience. If I remember well, the signal was very weak and, since I don’t speak Japanese, I didn’t know what the content of its broadcasts was about. But today, with the possibility of recording the audio, transcribing it and translating it, it has become more interesting to follow its programs on shortwave here in Brazil, more specifically in Porto Alegre (distance between Nikkei’s transmitter in Chiba, Japan, and Porto Alegre, Brazil: 18779 km).

Nikkei Radio 1 was founded in 1954 and Nikkei 2 in 1963, and at the time it was called Nihon Shortwave Broadcasting Co., better known by the acronym “NSB”. Some Japanese electronics manufacturers have in the past released receivers dedicated to receiving the signal from these stations (see below).

Today, the Japanese company Audiocomm has radio models whose packaging states that this receiver is compatible with Nikkei Radio; note the image alluding to horse racing (see below).

I haven’t been able to acquire any of these devices (yet), since they were basically produced for the Japanese public. But any receiver with shortwave bands can tune into Radio Nikkei. I use my good old XHDATA D-808 with a long wire antenna. In Porto Alegre, the best propagation is between 08:45 AM and 06:15 AM (UTC). In the late afternoon, the signal also arrives, but with a fair amount of static.

Both Radio Nikkei 1 and Radio Nikkei 2 operate on the following frequencies:

Radio Nikkei 1:

3.925 MHz (in case of emergency)
6.055 MHz
9.595 MHz (in case of emergency)

Radio Nikkei 2:

3.945 MHz (in case of emergency)
6.115 MHz
9.76 MHz: (in case of emergency)

On the station’s website https://www.radionikkei.jp/ you can find details of its programming, as well as broadcast times, including a table (in Japanese) with this information, which can be translated with the help of Google Lens.

Radio Nikkei also broadcasts its programming via streaming, however the platform used (radiko) is inaccessible to me here in Brazil (see message below).

Nikkei Radio is majority-owned by the business newspaper Nihon Keizai Shimbun and the Tokyo Stock Exchange, which means the station focuses mainly on the financial market. However, much of its programming, especially on weekends, is dedicated to horse racing, a popular sport in Japan. In addition to news, talk shows and music, the radio station also broadcasts evangelical preaching (!). One of these religious programs is called “True Salvation” and is sponsored by The Japan Gospel Mission, a Christian Protestant organization.

This heterogeneous mix of business, horses and Jesus Christ makes Nikkei Radio an interesting station to tune into, to say the least.

The radio listening sessions published here were made in the central Porto Alegre, Brazil, between January 15th and 19th, 2025.

(Domo arigato gozai masu Mr. Tagawa Shigeru for helping me with translation).

Click here to view on YouTube.

Video Short: Tuning In Radio Nikkei 1

Part of Radio Nikkei 1 program “Health Network”, in Japanese. Topic: Winter diet and health. Listened in Porto Alegre, Brazil.

Qodosen DX-286 First Impressions

21 Replies

By Jock Elliott, KB2GOM

There was quite a bit of excitement in the ultralight radio community in 2024 when folks “discovered” the Qodosen DX-286 radio.

The very first version of this radio was the Qodosen SR-286. Its Big Trick was that it was based on the NXP TEF6686 DSP chip which is designed for car radio use and delivered impressive performance on AM (medium wave broadcast band), FM, and shortwave (it also receives LW; I have not tested that.). The SR-286 was later refined and became the DX-286, which late last year I bought. The two versions of the radio look virtually identical except for the model designation on the front panel.

The bottom line: I can, indeed, confirm the performance of the DX-286 is, as my Dad used to say, “hotter than a two-dollar pistol.”

While I don’t actually know much about the thermal properties of cheap handguns, I can say with authority that the DX-286 is very pleasing to own and operate.

The DX-286 is a small radio, measuring 5.28″L x 1.18″W x 2.99″H. The fit and finish, for the most part, are excellent. The front is studded with 23 buttons, a speaker grill/opening, and a digital display. On the left side is a port for plugging in an external antenna. On the right side, you will find a tuning knob that can be pushed in to change the tuning step and auto tuning, a volume adjustment wheel, a charging port, and a port for plugging in headphones.. On the back is a hatch for accessing the rechargeable 18650 battery and a flimsy-looking flip-out foot for propping the DX-286 at an angle. On the top of the radio is a fold-out telescoping metal antenna that measure about 19 inches long when fully extended.

The DX-286 comes in a neat foam-cushioned plastic case that includes an extensive user manual, a drawstring bag for protecting the DX-286 when it is out of the case, a charging cable and an optional extra battery.

From the DX-286 manual, here are the frequency ranges that the DX-286 can receive and the tuning steps are available.

Frequency Range/Tuning Step

FM:

64-108MHz (suitable for Russia/Eastern Europe)
76-95MHz (suitable for Japan),
76-108MHz (suitable for School)
87-108MHz (suitable for Europe, Oceania, Africa, Asia)
87.5-108MHz (suitable for China, Americas)

(Tuning step is 250kHz/200kHz/100 kHz/50kHz/30kHz/10kHz)

SW: 1711-27000kHz (Tuning step is 1kHz/5kHz)

MW:

522-1620kHz (Tuning step is 1kHz/9kHz)
520-1710kHz (Tuning step is 1kHz/10kHz)

LW: 144-519kHz (Tuning step is 1kHz/3kHz)

Note: the DX-286 does not receive SSB signals, doesn’t do synchronous detection, or receive NOAA weather radio or the air band.

One of the things I have discovered messing with radios over the years is that ergonomics matter. The first definition of ergonomics from the American Heritage Dictionary is: The applied science of equipment design, as for the workplace, intended to maximize productivity by reducing operator fatigue and discomfort.

Let me give you an example of how ergonomics applies to radios. The XHDATA D-220 is a very simple radio. It receives FM/MW/SW bands and that’s it. As such, it has a very simple set of controls: a tuning knob, an ON/OFF/VOLUME knob, and a slide for selecting bands . . . and all that is needed.

By contrast, the Qodosen DX-286 is an extremely sophisticated receiver that offers a ton of interesting options: switching amplifiers and attenuators on and off, selecting internal and external antennas, choosing bandwidths, tuning steps and much more, each depending on what band you are trying receive.

In my view, in an ideal universe, a radio as sophisticated as the DX-286 would have a knob (or switch) for every job on its front panel, but that would make the front panel huge. However, in a small radio as sophisticated as the DX-286, many of the buttons serve more than one function, and those functions may change depending on band. As a result, you will be richly rewarded by studying the manual, which can be downloaded here [PDF], to take full advantage of the many functions of the DX-286.

But here’s the really good news: you don’t need encyclopedic knowledge of the user’s manual to use and enjoy the DX-286. I have been listening with it for three weeks and have consulted the manual exactly twice: once to find out how to switch to an external antenna while receiving MW (press and hold the RDS button) and once more to find out how to switch between medium wave and shortwave (quick-press the AM button until you get the selection you want; FM has its own button). In short, you can take a very un-sophisticated approach to the DX-286 and still have a bunch of fun with it.

The performance of the DX-286 is impressive.

I habitually listen with headphones (that helps to compensates for a hearing deficit that hearing aids can’t correct). Cruising the medium wave broadcast band, I’ve been able to hear very faint medium wave stations that I could not detect with other radios in its size class.

In addition, the DX-286 is the only ultralight that I own that allows me to connect an external antenna through a hardwire connection to boost medium wave reception. It’s easy: while in MW mode, plug the external antenna into the external antenna socket and then use the RDS button to switch from internal to external antenna. One of my joys has been to “sneak up” on very faint MW stations in the early morning using the DX-286’s internal MW antenna, then switch to the Terk AM Advantage loop antenna (connected through a hardwire) to attempt to boost the signal sufficiently to hear (or deduce) a station ID.

FM reception seems similarly robust . . . although I must admit that I am by no means an expert FM DXer. One evening, while poking around the FM band, a faint station popped up. Wiggling the telescoping antenna around, I found that if lowered the antenna to a horizontal orientation, I could receive an entirely different FM station. Cool! The DX-286 has RDS to help in IDing FM stations, but I wasn’t using it at the time.

SW performance, in my view, is also remarkable.

One mid-morning I used the AUTO seek buttons to search for SW stations using the whip antenna and found 20. Plugging in an external 45-foot wire loop antenna and using the seek function again, the DX-286 found 38 stations, some of which were at the extreme edge of detectability.

There are a couple of additional items that deserve mention. First, it seems there is something going on with the audio/signal processing within the DX-286 that renders the audio more pleasant to listen to on a “rough copy” MW/SW signal than some of my other radios. I might be deceiving myself, but I don’t think so.

Second, the DX-286 is quiet to operate. Pushing various buttons and turning the knob results in little noise, and this preserves domestic tranquility when I’m doing my horizontal DXing with the Better Half trying to drift off to sleep next to me.

Now, if this were a trip to Santa’s Lap, improvements to the DX-286 I would like to see would include SSB operation, NOAA weather radio, the air band, and operation off ordinary AA batteries . . . but lack of those aren’t deal breakers.

In the end, I can happily use and recommend the DX-286 just as it is.

Finally, a neat anecdote involving the DX-286. One of my pals bought one in the fall. He checked into the Radio Monitoring Net, which I run Tuesday nights on a local 2 meter repeater.

“I’ve got an election story to tell you, and it involves radio,” he said.

“Like you, I watched the election results on TV Tuesday night, but with the sound off. Instead, I was using the Qodosen DX-286 to listen to results on radio direct from Atlanta and Philadelphia (he lives in upstate New York). I got the results for Georgia and Pennsylvania two hours ahead of the national news!”

I told my wife about this, and she asked, “What radio was he using?”

I bet you can figure out the rest of the story.

Click here to check out the Qodosen DX-286 at Amazon.com
(Please note: this is an affiliate link that supports the SWLing Post at no cost to you.)

Carlos’ Illustrated Radio Listening Report and Recording of NHK (January 16, 2025)

Bob’s Radio Corner: The Curious Case of the Nibi-Nibi Islands

4 Replies

Many thanks to SWLing Post contributor Bob Colegrove, who writes:

Hi Thomas,

No mention of UTC or frequency in the attached. Made my day, but some folks apparently were not amused.

Source was “Short-Wave Report” by Hank Bennett, Popular Electronics, Ziff-Davis Publishing Co., New York, p. 86, March 1959.

Regards,

Bob Colegrove

This absolutely made my day as well, Bob! What a delightful bit of pranksterism from our esteemed DXing history.

Unlocking Rare DX Treasures with SDR-Console’s Powerful Data File Analyzer Tool

6 Replies

Finding Rare DX with the Data File Analyzer

By Don Moore

Don’s DX traveling stories can be found in his book Tales of a Vagabond DXer.

I’ve been a real jack-of-all-trades in my over five decades of DXing. I began with SWBC (shortwave broadcast) but soon branched out to medium wave and voice utility. Later I added longwave beacons and more recently I’ve gotten into digital utility stations. My goal has always been to log lots of different stations from lots of different places. And the rarer they are, the better.

For SWBC and medium wave stations, as well as scheduled utility broadcasts such as marine and aeronautical weather reports, the DXing process is simple. You tune to a frequency at a time when a station is scheduled to be on the air. It’s either there or it’s not there. If it’s not there then maybe propagation isn’t right or maybe your antenna/receiver setup isn’t the best for that frequency band or the station’s power level. You tune away to find something else with plans to try again another day.

But it’s not always that easy. Most utility stations do not have fixed schedules and only come on as needed. The best example of that is two-way marine, aeronautical, and military voice communications.

In eastern North America, tune to 8906 kHz anytime from late afternoon until morning and set your receiver to USB mode. You’ll probably hear empty static at first but it’s unlikely that more than ten or fifteen minutes will pass before you’ve heard some aeronautical traffic. The frequency is assigned for communication on the North Atlantic and is heavily used by aircraft communicating with New York Radio, Gander Radio (Newfoundland, Canada), and Shanwick Radio (Shannon, Ireland). If you keep listening, the frequency will probably be occupied around 25% of the time. Wherever you are in the world, there are a few heavily used air frequencies like 8906 kHz and listening to them can be fascinating. But I want to log more than just a few easily heard stations.

Sticking to aeronautical DX, there are many assigned frequencies for different regions and air routes around the world. But propagation to those distant areas is unpredictable and less-used routes have fewer flights. Fewer flights mean less radio communication and more empty static. The most interesting frequencies may only see traffic a few times a week.

Hearing the rarest voice utility DX requires listening to lots of empty static just to get a brief DX catch. For years my process was simple. I would set my receiver to an interesting frequency and leave the tape recorder running while I sat nearby listening and doing something productive. I got some very good DX over the years that way. But I don’t want to think about how many long hours of empty static I listened to in order to get that DX.

SDRs offered some improvement. Instead of audibly monitoring a specific frequency I could now make a spectrum recording that included a band of interest, say the 8815 to 9040 aeronautical band. During playback I could visually monitor the SDR waterfall for interesting signals. That works. But watching an SDR waterfall scroll by for three or four hours gets tedious quickly.

(When I refer to SDRs, I mean ones consisting of a small box that is connected to and controlled from a computer using a software program. None of this applies to models such as the Malachite line or the Icom IC-R8600, which use SDR technology inside but mostly function as a traditional receiver.)

Finding a Better Way

That better way is, I think, one of the most exciting DX tools out there – the Data File Analyzer in the SDR-Console program. Since I learned about it a few years ago, the Analyzer has gotten me all kinds of catches that I probably wouldn’t have gotten otherwise. Let’s start with an overview and then dig into the how-to.

SDR-Console is one of the better-known SDR programs and it works well with most of the common SDR radios on the market, including the Airspy, Elad, Perseus, and SDR-Play models. Here’s what the main window looks like:

The Data File Analyzer is a second window that produces a scrollable waterfall display for the entire length of an SDR spectrum recording. The display is similar to a standard waterfall with frequencies along the bottom and times along the side. However, there is also a scroll bar on the right side for browsing through the entire length of the recording. Instead of watching a four-hour spectrum recording slowly roll by in real time, I can scroll through the window looking for DX.

And this is what makes the Data Analyzer really useful. When I spot an interesting signal, I click on it and that causes the main window to start playing at that time and frequency. Now going through a four-hour spectrum recording takes from a few minutes to around half an hour, depending on how much DX I find.

Here’s a closeup of part of that same screen of spectrum recording made on 24 October 2024 at a DXpedition in western Pennsylvania, USA.

“A” marks a short exchange between an aircraft and Ndjamena Radio in Chad on 8894 kHz. “B” is Niamey Radio in Niger on 8903 kHz. “C” is Gander Radio on 8891 kHz. Just to the left of that is a string of digital signals. “D” is New York Radio on 8918 kHz. Again, there is a string of digital signals just to the left. Finally, “E” is communication from Dakar Radio in Senegal and Sal Radio in the Cape Verde Islands on 8861 kHz. I caught four African aero stations in just four-and-a-half minutes. I could also show you long stretches of time when there was nothing interesting coming in. With the Data File Analyzer I was able to visually find and focus on the DX and not waste my time with the empty static.

Here’s another image taken at the same DXpedition. Notice the three transmissions between 8820 to 8845 that seem to be mirroring one other.

That turned out to be Flightwatch Brisbane, the Australian regional aeronautical network. It uses multiple transmitter sites on 8822, 8831, and 8843 kHz to cover the entire country. I had never logged it before and I doubt I would have found it if DXing in the traditional manner.

The How-To

Here I’m going to assume that you already have SDR-Console installed and know the basics of how to use it, including making spectrum recordings. (If not, see the links at the end.) This article was written using version 3.4 of SDR-Console. Some of the functionalities described are not in earlier versions, so upgrade if you are not up to date. And I should point out that while you can do this on a single monitor, it works more smoothly if you have a dual monitor setup and can put each window on a different screen. Continue reading →

Bridging Two Worlds: Shortwave Listening Meets Amateur Radio

5 Replies

When the SWL and Amateur Radio hobbies meet

by Dan Greenall

Many of us who are also amateur radio operators, got their start in the hobby through simply listening to shortwave radio, or perhaps, to stations in the AM or FM broadcast bands. I suppose it is then inevitable that these two hobbies are bound to connect with each other from time to time. Here are a few examples of this that relate to my experiences.

In 1972, while doing a random band scan on shortwave, I came across a point-to-point radio station from Managua, Nicaragua that was transmitting a repeating test message (recording attached below):

Audio Player

00:00

Use Up/Down Arrow keys to increase or decrease volume.

The station was operated by the Tropical Radio Telegraph Company and I sent off a reception report in hopes of receiving a QSL from them. As luck would have it, the Plant Engineer, Guenter G. Zaenker, responded with a friendly letter including some details about their transmitter power and antennas used.

A couple of years later, when I got my amateur radio licence (VE3HLC), my SWL activities took a back seat to ham radio for a while. In 1978, I received a QSL for a contact with station YN1Z in Managua who turned out to be none other than Guenther G. Zaenker.

I worked Guenter for a final time as TG9XGV in Guatemala City, Guatemala. How is that for completing a hat trick!

Shortly after receiving my amateur radio ticket in 1974, I made a contact with station PJ9BN, Jack Van Sciver on the island of Bonaire in the Netherlands Antilles.

It turns out he worked at Trans World Radio, a broadcaster I had listened to regularly on the SWBC bands and it was quite exciting to discover this connection. Attached is a link to a recording I made of this station that same year as they were concluding a segment of their popular DX Special program:

Audio Player

00:00

Use Up/Down Arrow keys to increase or decrease volume.

Audio Player

00:00

Use Up/Down Arrow keys to increase or decrease volume.

https://archive.org/details/trans-world-radio-bonaire

It seems that Jack is still going strong as I recently found this link to his current amateur callsign NA3F: https://www.qrz.com/db/NA3F

A final note, I had made a 2-way contact through the Oscar 6 amateur radio satellite (uplink on 2 metres, downlink on 10 metres) in 1976 with W.G. “George” Roach in Ottawa, Ontario.

Some 11 years later, I was able to pick up station CFMO FM on 93.9 MHz, over 300 miles away, through some great ducting conditions. When I received a QSL from the station, it was signed by W.G. Roach who was the chief engineer at CFMO FM.

It certainly is a small world! I wonder how many others out there have experiences similar to mine?

Why Jeff Returned the Qodosen DX-286

14 Replies

Many thanks to SWLing Post contributor Jeff McMahon, who notes that he’s published his thoughts about the Qodosen DX-286 [SWLing Post affiliate link] over on his blog, The Herculodge. While the DX-286 had solid AM reception, its audio quality and build didn’t quite meet his needs.

In the end, Jeff opted for a more robust choice for his setup. Curious about his experience with the DX-286 and why he made the switch? Read Jeff’s review here.