Tecsun R-911: $15.80 with free shipping at Amazon

Fullscreen capture 8272015 125437 PM

Many thanks to SWLing Post reader “RCXB” who comments:

“Another radio deal, if you don’t mind the writing in Chinese, you can get a Tecsun R-911 for just $15.80… A couple dollars cheaper than its already-cheap re-branded Kaito WRX911 namesake that everyone raves about.”

As of this morning, there are still Tecsun R-911s in stock at this price.

While the “911” series of analog shortwave receivers (i.e. Tecsun R-911, Kaito WRX911) isn’t going to win any awards for outstanding performance, they are capable little radios for the price.

Kaito-WRX911

I have a Kaito WRX911 (above) and often use it as a low-end benchmark for inexpensive portables like the DE321. The WRX911 is a decent little mediumwave receiver as well; I especially love the fact that it does a decent job nulling unwanted signals as you turn the radio body.

Perhaps the best thing about the ‘911 series is that they’re dead simple to use. No manual needed. Just turn it on and tune around!

If you’re looking for a great shortwave receiver, skip this deal. If you’re looking for an inexpensive radio to keep in your car’s glove compartment, home emergency kit, or camping pack, click here to check out the Tecsun R-911 on Amazon.

Universal Radio: Used Tecsun PL-680 for $69.95

Universal-Radio-Used-Tecsun-PL-680

I just noticed that Universal Radio is featuring the following used Tecsun PL-680 in their used receiver collection. Here’s the description:

The Tecsun PL-680 receives longwave, AM, FM and SW bands plus VHF Airband. It features a backlit digital display, stereo FM (to ear jack), SSB, clock timer, 2000 Memories, Sync. Detection, ATS and keypad entry. The left side features earphone, external antenna and input voltage jacks. The right side features a variable BFO and tuning knob. The rear panel has a battery compartment for 4 AA cells (not supplied). This PL-680 system includes: box, nice carry case, printed manual and earphone.

The price is $69.95 plus shipping–very reasonable, in my opinion. The best part is Universal Radio offers a reputable 60 day warranty with all of their used items.

I regularly check Universal’s used and demo list. Occasionally, great bargains pop up and I feel I can always buy from them with confidence as they check over each item before posting.

Click here to read our review of the PL-680.

Bob’s review of the C.Crane CC Skywave

CCrane-CC-Skywave

SWLing Post reader, Bob C., recently shared his review of the C.Crane CC Skywave portable radio:

Well, I just received my new CC Skywave radio and it’s terrific! I own a lot of portable radios (including several Tecsun DSP sets), and the Skywave is a new favorite and will likely become my standard radio for travel.

Good fit and finish, great ergonomics, and easy to use. I was pleased to find that, despite what’s written in the ads and on the back of the radio, you can set the radio to receive FM down to 76 MHz by selecting the a 9 kHz MW spacing.

Great for international travel. The following is my brief review (by band):

Mediumwave

The Skywave is far better than any of the Tecsuns and is almost as good as the C Crane 2E (my best MW receiver). At my location (40 miles N of Chicago), the distant groundwave fringe includes WLW, WJR, and KTRS (St. Louis) – in descending order of reception potential. Most radios can get a whisper of WLW (though not discernible), while the other two are rare. The C Crane 2E gets WLW and WJR well enough that you can listen; KTRS is detectable. The Skywave gets WLW and WJR and you can tell that KTRS is there. That indicates that the Skywave is among the best. And there are no birdies nor whistles on the band. Nice.

FM

Just as sensitive and about 99% as selective as any of the Tecsun DSPs. The shorter antenna doesn’t seem to hamper reception at all. And, with no soft muting and a more logical tuning setup, it’s a pleasure to work with. Lastly, the stereo reception threshold on the C Crane DSP chip is significantly lower than that on any of the Tecsun rigs, so most signals decode stereo and simply sound better. Where I live, I have tons of signals that are 0.2 MHz apart (i.e. 101.9 Chicago, 102.1 Milwaukee, 102.3 Waukegan – and local) – the Skywave has no trouble separating these and providing a usable signal for all three.

Shortwave

Seems to do just fine. I have not had any overload issues with my unit and can pull in all as many SW signals and most of my other small portables. The lack of SSB is an inconvenience, I suppose, but I guess you can’t have it all!

NOAA/Weather radio

This band is great to have and is perfectly functional. I will say that this isn’t my most sensitive WB radio, but it’s not deaf by any definition. It’s just a little less sensitive to distant fringe WB stations than some of my other sets. But it does dependably pull in anything within 60 miles, so we’re only talking about ability to pull in distant fringe signals (which can be fun).

Air

I’ve played around with this a little and it definitely works better than expected. O’Hare tower is about 25 miles away and I get it clearly, along with aircraft that are (from what I can tell) basically anywhere within about 60 miles. The ability to scan is very helpful; however, catching a signal when someone is broadcasting is tricky. A little online research into local ATC frequencies goes a long way toward having fun on this band. The Skywave seems to work the Air Band better than the G6 and G3, my only other radios with this band.

So, overall, this radio has been a very pleasant surprise. No disappointments whatsoever. Kudos to C Crane Company for doing such a fine job with yet another radio.

Thanks so much for sharing your thoughts on the CC Skywave, Bob! Like you, I really love this little radio for travel and gave it a favorable review several months ago.

That’s an excellent tip about widening the FM frequency range down to 76 MHz by selecting 9 kHz steps on mediumwave. Brilliant!

Readers should be aware that some Skywave owners have noted a vulnerability to overloading and imaging in urban markets or where blowtorch stations are nearby. If your listening post fits this description, you may want to hold off until C.Crane has addressed the issue.

The CC Skywave can be purchased directly from C. Crane. It is also available at Universal Radio and Amazon.com.

Jeff finds a solution for sticky preset buttons on the CC-Radio 2E

CCradio 2e

Jeff, over at the Herculodge blog, recently posted that the preset #2 button on his C.Crane CC-Radio 2E had become so sticky, it was almost to the point of not being functional.

One of his readers suggested that he use Deoxit spray to remedy the sticky button and it worked!

Deoxit is amazing stuff and something I suggest any radio enthusiast keep handy. Years ago, I had an Icom IC-735 I thought needed a new power button;I had to press and hold the button for the power to turn on. I searched for a replacement botton for weeks. When I reached out to a friend who is an electronics technician, he suggested that I open the chassis and try spraying the button with Deoxit.

I did, and it worked beautifully.

Deoxit is not the cheapest contact cleaner around, but it is the brand I trust the most. It comes in both a spray and liquid form.

Hot deal: Tecsun PL-380 $24.99 and free shipping

Fullscreen capture 8262015 21204 PMWhile browsing Amazon, I discovered a hot deal: a new Tecsun PL-380 for $24.99 including shipping.  I was very tempted to snatch this one up, but since I already have both a PL-380 and PL-310ET, I’d rather give the opportunity to someone else.

This is not being sold by Amazon directly, rather through one of their sellers. Simply follow this link, then search for for the “1 new from $24.99” to grab the bargain.

There may only be one of these available, so if you’re interested…go, go, go!

Tecsun PL-880: Evans notes signal meter and other discrepencies

PL-880 (1)

SWLing Post reader, Evans (in Greece) writes:

I would like your opinion regarding two strange points we noticed in two different Tecsun PL-880 models, which a friend and I have recently purchased. In particular:

  1. The signal meter is supposed to measure up to 99dBu (my Tecsun PL-390 s-meter goes indeed up to 95-97dBu for very strong amateur signals in my area included mine in mw zone). The point is that for both devices (both of which have 8820 firmware) the signal meter does not exceed 85 dBu and in particular my Tecsun PL-880 signal meter does not goes over 70dBu (ie. even lower measurement). Why this behaviour?

  2. Another strange point is that my friend’s Tecsun receiver displays for a “quiet” frequency (mw) a noise level of about 10-12dBu, while my Tecsun device shows only 2-3dBu noise (same frequency in the same spot!). We both tried the threshold muting adjustment (key 9) and this worked a bit but with minor results in sensitivity, especially for my Tecsun PL-880 receiver. Is it possible to adjust the noise level so that it can be 10-12dBu instead of being only 2-3dBu and hence better sensitivity? And is it possible to adjust the maximum signal level (99dBu instead of 85dBu or even worse 70dBu for my device)?

  3. I have noticed that the hidden feature regarding the external mw antenna didn’t work in my case, even though I did resets an tried many times. I pressume, hence, that maybe Tecsun disabled this hidden feature. Is there any modification available to “add something” into the radio hardware in order to be able to listen mw/lw frequences with external antenna and thus, increase sensitivity?

Many thanks for your questions, Evans. Since my PL-880 is a first production run unit, I’m hoping readers who’ve recently purchased the Tecsun PL-880 might comment.

I suspect Tecsun engineers give little thought to calibrating the S meters. I’m very curious if there is a hidden feature to do this, but I’m guessing this is limited only to those who can program the DSP functionality of the chip inside.

Tecsun cautions against using Lithium AA cells in the PL-606

TecsunPL-606

SWling Post reader, Philip Dickinson, recently contacted me with the following question:

“I have just bought a Tecsun 606 which takes two AA batteries which I think are normally rated at 1.2 volts. I have just ordered some lithium ion AA and notice that they are 3.7 volts. Can I use them?”

I replied to Philip that I’m pretty sure I’ve used lithiums in my PL-380 and/or PL-310ET without experiencing any problems. I know I’ve certainly used lithiums in several other receivers. [Update: I’ve always used Energizer and Duracell 1.5 V Lithium AA batteries–not 3.6V AA batteries.]

As I was about to post his question here on the Post, Philip sent another message:

“I found Tecsun’s email address and they rule out the 3.7 volt lithiums. Good job I checked.”

Wow–indeed, I’m glad you checked as well!

I had searched the PL-606 owner’s manual (PDF), but found no reference for voltage tolerances. Now I’m curious if other Tecsun receivers would have difficulty handling the higher lithium voltage.

Please comment if you have insight!

[UPDATE: Please check out this follow-up post and primer on Lithium batteries.]