Tag Archives: Eton E1

Paolo’s review of the Eton Elite Satellit

Many thanks to SWLing Post contributor, Paolo Viappiani, who shares the following guest post:


ETON Elite Satellit: an expensive flop 

by Paolo Viappiani, Italy 

Introduction 

After various and sometimes conflicting announcements that have created strong expectations in radio listening enthusiasts, ETON has recently launched on the extra-European market (basically in the United States) what should have been its “top of the range” portable, the Elite Satellit model . Aesthetically (and also functionally) inspired by the previous E1 model, the new portable radio should have been free from the defects of its predecessor, in particular as regards the “sticky” coating of the plastic case but also with respect to other technical drawbacks repeatedly reported by users (display contrast and shading, etc.).

The new Elite Satellit was announced to look practically identical to the E1 model and to use the same cabinet, but with various additions and improvements: RDS, FM-HD reception, Air Band, etc. A frequency resolution of 10 Hz in the shortwave bands, a PBT (Pass-Band Tuning) facility, a large LCD display with the possibility of changing its background color were also provided.

It is therefore obvious that its release was highly anticipated, and the resulting expectation gave rise to numerous pre-orders of the radio in the United States, where the main distributor was (and still is) the well-known Universal Radio company owned by Fred Osterman [1].

Unfortunately, the initial boom in sales of the ETON Elite Satellit was followed by many return requests due to the poor performances of the radio and the numerous defects encountered by users, also reported in a lot of videos and negative reviews on the Internet [2].

Fred Osterman himself, disappointed by the performance of a radio that he should have sold as an excellent portable, began to test the individual devices in his own laboratory and to return to ETON all the units that did not meet the declared specs (basically the vast majority of those received for sale) [3]. All this caused great confusion at ETON, which was forced to somehow remedy its errors (mainly due both to a very approximate alignment of the circuits and to an almost non-existent final quality control).

Unfortunately, despite the precautions adopted “hastily” by ETON, most of the “overhauled” devices that were returned to Universal Radio continued not to comply with the specifications, so that Fred Osterman, who is a good technician and a very honest dealer, decided to cancel most of the orders received and to sell the very few radios found to be in good working order within the United States only, (see again note [3]). I myself placed an order from Universal Radio for an ETON Elite Satellit on August 8, 2022 (Order ID: #8992932, retail price $599.99 plus shipping and import customs duties), but Fred was forced to “drastically cut” the orders received and to cancel mine too, due to the impossibility of satisfying the many customers on this side of the pond. However, my desire to have an example of the ETON Elite Satellit in my hands, in order to be able to see, test and judge the new radio it was really great, and great was also the wish to realize if the many negative impressions circulating on the web were or were not justified and true.

So I decided to look for other ways to buy the “latest cry” of ETON. The opportunity presented itself to me, almost unexpectedly, by visiting the American site of Amazon [4].

The purchase and the arrival of the radio; my first impressions 

I therefore ordered an ETON Elite Satellit portable radio on the Amazon.com website on January 17, 2023 at the price of $698.16 (including shipping and customs duties). I report in Figure 1 the screenshot concerning my order #113-3575479-2262609 which, as it appears, was delivered to me on January 23, 2023, after only five days; this demonstrates the truthfulness of my statements.

Figure 1: A Screenshot of my Amazon.com order dated January 17, 2023.

The shipment was delivered to me by UPS courier in the usual Amazon packaging in a plastic bag (Figure 2).

Figure 2: The UPS label and the Amazon plastic bag.

Inside the envelope was a cardboard box containing the radio, in understandably less than perfect conditions (Figure 3).

Figure 3: The cardboard box of the ETON Elite Satellit.

Figure 4: The contents of the radio box.

Once the package was opened, the contents of the box looked like in Figure 4: two shock-absorbing spacers held the device in position (inserted in a plastic bag) and its AC power supply (into a white box, and obviously with a 117V input voltage). There was also the “User Guide” in a paper version and a “mini-guide” to listening to short waves; completely absent was the CD that used to be enclosed in the box of the previous E1 version of the radio.

Continuing with the operations, I came across a sort of brown plastic cover intended for the protection of three sides of the radio (front, top and back) which can be held in position by some magnets and is provided with two circular holes in correspondence with the tuning knobs and volume of the radio (Figure 5).

Figure 5: The ETON Elite Satellit radio and its “case” (?)

I omit to make comments on this “protection”; I only say that in my opinion it is useless (and ugly too) and I believe that the gentlemen of ETON could have wasted their energies otherwise; but maybe someone likes it too…

Figures 6 and 7 show the front and back of the portable radio as soon as it has been removed from the protective plastic bag. Note the almost identical appearance of the cases of the Elite Satellit and of the previous E1 model.

Continue reading

Spread the radio love

Pavel fixes a stereo lock in the Eton E1

Many thanks to SWLing Post contributor, Pavel Kraus, who shares the following guest post:


Eton E1 – fault in stereo reception

I recently became the owner of an Eton E1 receiver, which I obtained on eBay from the USA.

The receiver is great, everything worked, error-free display. The only problem was that even FM and strong local stations did not play stereo even though stereo reception was set in the menu. The stereo text on the display flashed several times when the stations were not tuned in precisely, but after the stereo tuned, the text went out. I know that stereo reception is not the most important thing for this receiver, but it bothered me that there was a defect at all.

The Sanyo 3335 stereo decoder is used in this radio. The stereo reception switching threshold can be set with a 10kohm potentiometer which is connected to terminal 4 of the integrated circuit:

I disassembled the radio by loosening the screws on the back of the radio. The receiver is divided into two parts. I removed the XM module and disconnected the part of the radio with the display from the flat wires on the second printed circuit board of the radio

I then removed the screws on the circuit board located at the back of the radio.

I removed the printed circuit board and found a matching resistor trimmer on the other side of the circuit.

Then I connected these two points with a wire (when running on batteries) so that I could turn on the receiver:

After tuning in to a strong local transmitter, I carefully turned the trimmer until the stereo sign lit up and listening to the headphones made sure the sound matched the stereo. I repeated this at several local stations.

The receiver now plays stereo perfectly and the settings do not affect other parameters of the receiver. After assembling the radio, I was able to enjoy quality stereo reception.

Spread the radio love

Rescuing the Eton E1 from a sticky situation

I’m back from a week of travels and the 2020 Winter SWL Fest. In short, is was another amazing Fest and so much fun. I hope to write more about it in the coming days, when I have a few moments to catch up and after I shake a nasty bug (chest cold) I picked up.

Although I had no intention of making purchases at the Fest beyond a few raffle tickets, I couldn’t resist snagging an Eton E1 (XM version) at a silent auction from the estate of our recently-departed friend, Tony Pazzola (WB2BEJ). Tim Moody kindly organized the silent auction.

Tony was an amazing friend to all and an avid radio collector, so there were some excellent radios offered up in the silent auction–I could have easily easy bid on each and every one of them! In the end, though, only one really caught my eye: the Eton E1 XM.

A small sampling of the radios from Tony’s estate.

Tony took amazing care of his radios, but his Eton E1 XM suffered from what all of those models eventually do: a sticky chassis.

Back in the day (roughly 2009 to 2013) Eton/Grundig covered a number of their radios models with a rubberized coating that unfortunately breaks down over time and becomes tacky or sticky to the touch.

I think this E1’s sticky coating put off potential bidders.

It was particularly nasty–if you picked up the radio, you had to immediately wash your hands.

The E1’s starting bid on Friday was $200–quite fair considering this unit is fully-functional and comes with all software, cables, manuals and a SiriusXM radio antenna. By Saturday, the starting bid had been decreased to $150. I resisted putting in an offer, but after seeing that it didn’t sell after all bidding had ended, I couldn’t resist. That E1 needed a good home, right? Plus the proceeds go to Tony’s family.

The sticky coating didn’t scare me. If you’ve been an SWLing Post reader for long, you’ve no doubt read our numerous posts about cleaning off this mess. There are a number of solutions, but I’ve heard the most positive long-term results by employing a de-greasing product called Purple Power (click here to read archived posts). Indeed, it’s the solution Eton Corporation recommends.

On the way home Monday, I stopped by a big box store and grabbed a bottle of Purple Power.

Tony still had the original plastic film on the large backlit display.

Sporting a pair of nitrile gloves, I grabbed a bunch of paper towels and a few cotton swabs, then started the cleaning process. I spent the better part of an hour carefully going over the entire body of the E1and trying to remove residue in every crevice without allowing the Purple Power solution to creep under buttons.

In short?  I’m very pleased with the results and am now a solid believer in Purple Power.

As others have reported, Purple Power breaks down the sticky residue and allows it to be removed with a cloth or towels with very little scrubbing. Indeed, the process was much easier than I anticipate.

Now I have a super-clean Eton E1 XM to put on the air!

Now I have no excuse to finally remove the sticky residue from both my Grundig G6 and G3!

So far, I’m loving the Eton E1. It is, no doubt, a benchmark portable. Of course, another motivation behind snagging this E1 is so that I can compare it with the Eton Elite Satellit once it eventually hits the market.

Do you have an Eton E1?  What are your thoughts about this receiver? Please comment!


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Sticky radios: time may be your friend

One thread that’s had a surprisingly long run here on the SWLing Post deals with sticky radios.

A number of portable radios manufactured in the past decade were coated in a rubberized, tactile material that was quite functional when the products were new. With time, however, the coating breaks down and becomes incredibly sticky to the touch. We’ve published a number of articles about how to clean sticky radios–click here to read our archived posts.

Many thanks to SWLing Post contributor, Lee Reynolds, who writes with his suggestion:

Gunk on radios – I was the lucky winner of an E1 at one of the ‘fests.

Of course, the coating went bad and it would up looking like the flypaper/Wino of radios.

I made a desultory attempt at cleaning it (using that Purple Power stuff) but it was a nasty, dirty job that I didn’t complete. A disheartening mess.

Fast forward three or four years after that. I had some time on my hands, I took another look at the radio.

I found that the gunk continues to mutate – it had actually lost most of its ability to adhere to the radio’s casing. Now it would rub off with a paper towel and nothing else.

A couple of rolls of paper towels and some Pledge left it something you no longer needed to put gloves on in order to feel comfortable touching.

So – another fix for the gunk – time and patience. No cleaners needed.

Thanks for sharing, Lee. Worth noting: if you gave up on your sticky radio some time ago, perhaps you should pull it back out of storage and see if the coating has deteriorated to the point it might simply rub off? Time might have made the job much easier.

Spread the radio love

Sony ICF-2001D/2010 vs ICF-SW77: The final result & next contender ~ The Eton E1

Hi there, after conducting a total of 14 reception tests comparing these two vintage – but excellent portable shortwave radios, there was a clear winner – the ICF-2001D. Interestingly, the second half of the testing identified yet another example of synchronous detection lock dropping out on the ICF-SW77 (during reception of Radio CANDIP, Democratic Republic of the Congo on 5066.4 kHz). Generally, however, and despite a fairly narrow performance margin, the ICF-2001D managed to deliver clearer audio across 5 of the remaining 6 reception tests, giving a final score of 9 to 3 in it’s favour. However, despite the clear win, there is no doubt in my mind at all that the ICF-SW77 is still a great portable receiver and in my humble opinion, remains one of the best ever made.

I believe this comparison test reveals the only likely remaining contender to the top-spot in portable shortwave receivers to be the Eton E1/E1XM. Originally to be marketed as the ‘Satellit 900’ (that never happened) and following a decade of development, involving RL Drake, it was finally introduced in 1995 – and then out of production within a few years. Fortunately, a couple of months ago, I managed to snag one in excellent condition on eBay, for a reasonable price. Now, these radios are not without issues, including, but not limited to; sticky rubber exterior casing, malfunctioning display, failing function keys and general all-round fragility. Not exactly what I would be looking for in a rugged, well-performing portable for my DXpeditions. However, as someone who is always exploring ways to ‘push the performance envelope’ and the obvious potential benefits of passband tuning, an allegedly superior synchronous detection circuit, 4 audio bandwidth filters and tuning resolution down to 10 Hz, the E1 was impossible for me to ignore. Thus, at some point in the near future, I will perform a similar comparison test with the Sony ICF-2001D and the Eton E1. Whichever camp you might be in, I hope you’ll enjoy the reception videos and find the results/conclusions informative.

For now, wishing you all excellent DX.

eton-e1l

The Eton E1; possibly the best portable shortwave receiver of all time?

 

Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.

Spread the radio love

eBay sighting: Eton E1

E1

Many thanks to SWLing Post contributor, Chris Freitas, who writes:

I came across this find on eBay. I was tempted to buy one myself, but I am content with the PL-680 I have right now. However, some SWLing Post readers may want to check it out:

Click here to view on eBay.

Thanks for the tip, Chris! It appears this seller has a long and very positive history–certainly a plus on eBay!

Spread the radio love

Eton E1 on eBay

Eton-E1-eBay

Many thanks to SWLing Post reader, Mike Nikolich (N9OVQ), who writes:

I am in the midst of downsizing and am selling my Eton E1 XM Receiver on eBay. It is gunk-free and the display works great. Here is the link:

http://ebay.to/2aIEtZf

Thanks, Mike. Looks like your E1 is in great shape! Click here to view on eBay.

Spread the radio love