Category Archives: Ham Radio

Testing the MFJ-1886 Receive Loop Antenna

By Jock Elliott, KB2GOM

Hang out any place online where shortwave listeners gather, and you won’t have to wait long before you hear something like this: “I recently moved to a condo, apartment, or house where there is a home-owners association. Listening conditions are pretty rotten, and I cannot string up outdoor antennas because of physical constraints or HOA rules . . . help!”

Ever since I got back into SWLing nearly two years ago, I have faced similar issues, as I explained here. During that time, I have frequently read that amplified small loop antennas work pretty darn well, and that has piqued my curiosity.

A couple of days ago, the good folks at MFJ (an SWLing.com sponsor) sent me their MFJ-1886 receiving loop antenna. Weighing just 2.5 pounds, the 1886 is a 36-inch-diameter loop of aircraft-grade with an amplifier attached in a weatherproof enclosure. Designed for receiving only, it covers .5 to 30 MHz.

The fit and finish of the 1886 is, in my opinion, great. Looking at the seamless loop and the molded enclosure for the amplifier, I have no reason to doubt what MFJ has to say about it: the MFJ-1886 is weather-sealed, very ruggedly constructed, and mechanically stable under all weather conditions. In fact, you can mount it permanently on any inexpensive TV rotor and direct it from the comfort of your shack . . . it also installs easily on a tripod or handheld mast for portable use.

From MFJ’s manual for the 1886 loop.

Important: the 1886 loop is a directional antenna. If you are looking through the open area in the middle of the loop (the flat side, if you will), you are looking in the direction in which the antenna tends to null out signals . . . in both directions. If you are sighting along the edge of the loop (at right angles to the flat side), that is the direction in which the antenna produces the most gain. As a result, you will get the most utility out of the 1886 if you can mount it in such a way that you can rotate it to maximize gain and/or null out noise or interfering signals as needed.

Since my mission was to test the 1886 indoors, I wrapped some parachute cord around the loop and hung it from a screw attached to the top of a window frame. Obviously, I am not getting the most from the 1886 by keeping it in a fixed position (in fact, I was getting maximum gain to the northeast and the southwest), but I did experiment with the antenna hanging from the ceiling so that it could rotate, and I did, indeed, find that signal strength rose and fell as the antenna changed position.

To see how the 1886 performed, I used my Grundig Satellit 800 as a test bed. The Satellit 800 has three different antenna inputs: a wire input, to which I attached the 50-foot horizontal room loop (an indoor antenna which runs around the perimeter of my radio room at about seven feet in the air); a coax input, to which I attached the MFJ 1886 loop, and the four-foot whip antenna that is built into the Satellit 800. By reaching around the back of the radio and sliding the antenna selection switch, I could easily change from one antenna to another and compare the 1886 loop with the whip and the horizontal room loop at various frequencies and settings.

Setting up the 1886 loop is super easy. First, attach a length of coax to bottom of the amplifier box. (The 1886 uses SO-239 connectors.) Attach that coax to the top of the Bias Tee. The Bias Tee supplies power to the amplifier mounted on the loop using the coax and without introducing noise. Run another piece of coax from the bottom of the Bias Tee to the receiver, and, finally, plug the power supply into the Bias Tee and the house power where you are using the antenna.

Operating the 1886 is even easier. To hear the signal from the loop without amplification, leave the Bias Tee switch in the OFF position. To hear the signal with amplification, just slide the switch to the ON position. That’s all there is to it. There are no fussy adjustments to make.

So how did the 1886 loop perform? Very well, thank you. In all cases, it clearly outperformed the Satellit 800’s whip antenna, providing more signal with less noise. When pitted against the 50-foot horizontal room loop wire antenna, the 1886 typically delivered more signal and less noise. In a few instances, the horizontal room loop was equal to the 1886 loop in terms of signal strength and low noise. In no cases, did the horizontal room loop outperform the 1886 loop.

Tuning around a bit, I found myself listening to a ham from Spain working DX on the 15 meter band. A little further up the band, a ham from central Bulgaria was dealing with a pile-up of U.S. hams trying to reach him. Of the three antennas options I had on the Satellit 800, the 1886 loop offered the most pleasant listening with more signal, less noise.

Then I tried the 1886 with a couple of my portable shortwave receivers. The Bulgarian ham was still on the air and was marginal on one portable and not hearable at all on the other on their native whip antennas. With the 1886 loop connected, however, the Bulgarian was clear and easy to hear. And – thanks to a ham friend who whipped up an additional coax “jumper” with amazing speed – I tried the 1886 loop with the MFJ 1045C active preselector and found the two made a very potent combo for pulling signals out of the mud.

So, would I recommend the MFJ 1886 Receiving Loop for a would-be HF listener who lives in a condo, apartment, or house with antenna woes? Absolutely . . . even if you have to hang it flat in front of a window. And if you can find a way to mount it so that it can be rotated, even better. (Someday, I hope to try the 1886 outside mounted on an inexpensive TV rotator. For now, there simply isn’t room in my cramped radio space.)

Of course, the performance at your location will depend on the conditions where you live. Nevertheless, I found the MFJ 1886 Receiving Loop to be easy to set up, easy to use, and effective.

Click here to check out the MFJ-1886 Receiving Magnet Loop Antenna at MFJ.

Suggestions for MFJ: offer a kit or accessory that would be make it easy to set the 1886 on a desk or table. Likewise a kit or accessory that would facilitate using the 1886 on a camera tripod seems like a good idea.

Additional note: The SWLing forum is a great place for discussing all things related to shortwave listening.

Spread the radio love

Mario shares a short review of the Airspy HF+ Discovery SDR

10 Replies

Many thanks to SWLing Post contributor, Mario Filippi (N2HUN), who shares the following guest post:

Author’s Airspy HF+ Discovery (small black box to the left of the laptop)

A Short Review of the Airspy HF+ Discovery SDR

by Mario Filippi (N2HUN)

I recently purchased an AirSpy HF+ Discovery. As a SWL for over 60 years who’s owned many shortwave radios by manufacturers such as Drake, Yaesu, Icom, Zenith, Kenwood, Panasonic, Sony, Radio Shack, Grundig, CountyComm, MFJ, Sears, AOR and have used a number of different SDRs such as the RTL-SDR.com, HackRF, NooElec and many other rudimentary inexpensive first generation SDR dongles, I feel the AirSpy was an excellent choice. It cost $169 plus shipping.

For LW/MW/HF reception, I use a 30’ ground mounted vertical with about 50 buried radials in different stages of decomposition hihi. For VHF, a roof mounted 2m/70cm SlimJim antenna is used, but I haven’t done much listening in that portion of the spectrum yet except for occasional foray into the aero, 2m ham, NOAA satellite and public service bands. Note that the AirSpy also covers 60 – 260MHz.

An older Dell Inspiron laptop and SDR# are used in conjunction with the AirSpy. For decoding, MultiPSK, FLDigi, MTTY, Yand (for NAVTEX), along with VB cable are the accompanying software to make the digital modes intelligible.

So far I’ve logged a few local LF aeronautical beacons and some DGPS beacons on longwave but will be in a better position to judge its performance when winter sets in. As for the medium (520 – 1710 kHz) wave AM broadcast band, the AirSpy easily brings in both local stations during daytime and distant stations at night with no adjacent channel interference whatsoever. Even low powered community Emergency Alert Stations in the 1600 – 1710 kHz portion of the band can be heard daily from this QTH. A rotatable loop would certainly improve reception though.

As for shortwave listening the AirSpy HF+Discovery is, in my opinion, great for listening to both shortwave broadcasts and utility stations though I tend to concentrate on UTES mostly such as VOLMET, WEFAX, RTTY (the few that remain unencrypted), CW marker stations (e.g. XSG and XSQ from China) NAVTEX (519 kHz), aero/maritime SSB, time signal stations (WWV, CHU) and many of the other esoteric digital utility signals populating the band. As for SW broadcast stations, WRMI, Radio Exterior, RFI, R. Marti, BBC, WWCR and Radio Algerienne, to mention a few have been received. The Frequency Manager (memory storage) in SDR# has quickly filled up with intercepts using the AirSpy.

As a ham and CB operator (yes, the two can mutually coexist in the same human body), I’ve found the AirSpy HF+ Discovery to be a trouper on all the HF ham and CB bands. One of my favorite hangouts is the 28.100 – 28.300 MHz slice of 10m where domestic and international low power CW beacons transmit their callsigns (and at times their grid squares and power output) into the ionosphere and achieve great distances. Recently, beacons from 5, 6 and 7 land in the US along with DX prefixes ED4, PY4 and XE1 were logged. If you’re into 10m FM operation you can also tune the AirSpy to hear local and distant repeaters on 29.62 – 29.68 MHz. When the band is open, .62 and .64 seem to be the most active here in Central NJ.

If you’re a CB (aptly named the Citizen’s Band) op, the AirSpy HF+ Discovery does a stellar job on Channels 1 – 40 which is especially exciting when the band’s open. While domestic (USA) CB’ers are limited to frequencies from 26.965 – 27.405 MHz you’ll nonetheless hear DX ops below our (USA) channel 1 and above channel 40 conversing in French, Spanish and German in LSB/USB. Add to this mix the fact that the FCC dropped the 150 mile limit for US ops a few years back and now the advent of the FM mode operation in the US, you’ll find the AirSpy won’t disappoint. In my opinion the AirSpy HF+Discovery was an excellent choice and I’m more than satisfied with its performance.

In the matter of honesty and full disclosure, I purchased the AirSpy HF+ Discovery completely on my own in an effort to upgrade my station. My choice was based on information gathered from the Internet and YouTube video reviews. The performance of this receiver was based on my experience using the vertical antenna described earlier, the hours spent at my QTH (location) listening to stations of interest to me and my six decades experience as a SWL. No test equipment to assess sensitivity, selectivity or other empirical methods to measure performance was used. That information can be found on the Airspy website. The main purpose of this article was to craft a rudimentary review for those interested with the caveat that reception will vary depending on many factors such as location, antenna, ionospheric conditions, feedline quality, computer/software variations, QRN, QRM, and operator experience. The results presented in this article are typical for my location; others may experience different results. Thanks very much.

Spread the radio love

DLARC: The Internet Archive is seeking Amateur Radio content

4 Replies

Many thanks to a number of SWLing Post readers who share the following announcement and request from the amazing Internet Archive:

Internet Archive Seeks Donations of Materials to Build a Digital Library of Amateur Radio and Communications

Internet Archive has begun gathering content for the Digital Library of Amateur Radio and Communications (DLARC), which will be a massive online library of materials and collections related to amateur radio and early digital communications. The DLARC is funded by a significant grant from the Amateur Radio Digital Communications (ARDC), a private foundation, to create a digital library that documents, preserves, and provides open access to the history of this community.

The library will be a free online resource that combines archived digitized print materials, born-digital content, websites, oral histories, personal collections, and other related records and publications. The goals of the DLARC are to document the history of amateur radio and to provide freely available educational resources for researchers, students, and the general public. This innovative project includes:

- A program to digitize print materials, such as newsletters, journals, books, pamphlets, physical ephemera, and other records from both institutions, groups, and individuals.
- A digital archiving program to archive, curate, and provide access to “born-digital” materials, such as digital photos, websites, videos, and podcasts.
- A personal archiving campaign to ensure the preservation and future access of both print and digital archives of notable individuals and stakeholders in the amateur radio community.
- Conducting oral history interviews with key members of the community.
- Preservation of all physical and print collections donated to the Internet Archive.

The DLARC project is looking for partners and contributors with troves of ham radio, amateur radio, and early digital communications related books, magazines, documents, catalogs, manuals, videos, software, personal archives, and other historical records collections, no matter how big or small. In addition to physical material to digitize, we are looking for podcasts, newsletters, video channels, and other digital content that can enrich the DLARC collections. Internet Archive will work directly with groups, publishers, clubs, individuals, and others to ensure the archiving and perpetual access of contributed collections, their physical preservation, their digitization, and their online availability and promotion for use in research, education, and historical documentation. All collections in this digital library will be universally accessible to any user and there will be a customized access and discovery portal with special features for research and educational uses.

We are extremely grateful to ARDC for funding this project and are very excited to work with this community to explore a multi-format digital library that documents and ensures access to the history of a specific, noteworthy community. Anyone with material to contribute to the DLARC library, questions about the project, or interest in similar digital library building projects for other professional communities, please contact:

Kay Savetz, K6KJN
Program Manager, Special Collections
[email protected]
Twitter: @KaySavetz

Spread the radio love

Photos from the 2022 Hamilton Ontario Hamfest

1 Reply

Many thanks to SWLing Post contributor, Mike (VE3MKX), who shares photos taken during the Hamilton, Ontario hamfest which took place on October 1, 2022.

Readers: This is a large gallery of 40 photos courtesy of Mike (VE3MKX). If you would like to view the entire image gallery click on the link to see more.

Continue reading →

Spread the radio love

Radio Waves: Cellular Scale Antennas, Space Comms, New Proposed Ham License in Australia, and Mid Century Television

Radio Waves: Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

New miniature antenna can operate wirelessly inside of a living cell (Tech Explorist)

An intracellular antenna that’s compatible with 3D biological systems and can operate wirelessly inside a living cell.

A new study could allow scientists to create cyborgs at a cellular scale, thanks to MIT Media Lab for designing a miniature antenna that can operate wirelessly inside a living cell. This could have applications in medical diagnostics, treatment, and other scientific processes because of the antenna’s potential for real-time monitoring and directing cellular activity.

Scientists named this technology Cell Rover. It represents the first demonstration of an antenna that can operate inside a cell and is compatible with 3D biological systems.

Deblina Sarkar, assistant professor and AT&T Career Development Chair at the MIT Media Lab and head of the Nano-Cybernetic Biotrek Lab, said, “Typical bioelectronic interfaces are millimeters or even centimeters in size and are not only highly invasive but also fail to provide the resolution needed to interact with single cells wirelessly — especially considering that changes to even one cell can affect a whole organism.”

The size of the newly developed antenna is much smaller than a cell. The antenna represented less than .05 percent of the cell volume in research with oocyte cells. It converts electromagnetic waves into acoustic waves, whose wavelengths are five orders of magnitude smaller, representing the velocity of sound divided by the wave frequency — than those of the electromagnetic waves. [Continue reading…]

Space Audity (20,000 Hertz Podcast)

This episode was written and produced by Jack Higgins.

We’ve all heard the iconic recordings from the Apollo missions. But how exactly does NASA manage to run live audio between Earth and the moon? And how might we chat with astronauts on Mars and beyond? Featuring Astronaut Peggy Whitson, NASA Audio Engineer Alexandria Perryman, and Astrophysicist Paul Sutter.

Click here to listen on the 20,000 Hertz webite.

Australia: Proposed new ham radio licence (Southgate ARC)

Australia’s communications regulator ACMA has asked radio amateurs to comment on their proposed amateur class licence and considerations for higher power 1 kW operation

The ACMA say:

Following the extensive 2021 public consultation and associated response to submissions, we have released a consultation paper on the proposed amateur class licence and supporting operational arrangements, along with considerations for higher power operation. This is the next step in our review of regulatory arrangements for the operation of non-assigned amateur stations.

The draft class licence for amateur radio has been amended to incorporate changes suggested by representative bodies, amateur radio clubs and individual amateurs during the 2021 consultation.

The consultation paper, proposed class licence and details about how to make a submission are available on the ACMA website
https://www.acma.gov.au/consultations/2022-09/proposed-amateur-class-licensing-arrangements-and-higher-power-operation-consultation-312022

Submissions close COB, Tuesday 29 November 2022.

Questions about the consultation
If you have an important question about this consultation, please send it directly to [email protected]. Please note, we may use the Amateur radio update e-bulletin to answer frequently asked questions.

Subscribe to the ACMA Amateur Radio newsletter at
https://www.acma.gov.au/subscribe-our-newsletters

Mid Century Television – live, local and unpredictable late 1950s television (Southgate ARC)

In the late 1950s television networks ruled the airwaves from 7 to 11 PM, but outside of that timeslot television was live, local and unpredictable.

Jim Hanlon, W8KGI, worked as a summer relief engineer at Cincinnati’s WCPO-TV from 1956 to 1958. At that time WCPO-TV did not have any video recording technology, so all local TV was live TV and provided a refreshing dose of live programming, equipment failures and production creativity that been lost in today’s pasteurized, homogenized TV ecosystem.

Join Jim as he recalls what it like producing live TV programming in the early days of television broadcasting.

Click here to view on YouTube.

Help keep communications history alive by becoming a member of the Antique Wireless Association at: https://www.antiquewireless.org/homepage/

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Teaching an old dog old tricks

13 Replies

By Jock Elliott, KB2GOM

It was Don Moore’s excellent article — An Introduction to DXing the MF Marine Bands — that inspired me. If you haven’t read it, do so now; it’s terrific. But be warned: my guess is that it will inspire you too.

Bottom line, ever since I read it, I have very much wanted to hear at least some of those MF marine stations that Don writes about. One of Don’s recommendations is “Hang Out on 2182 kHz.” So sometimes when I am messing around in the radio shack, I will park one of my shortwave receivers on 2182 USB in the hopes of hearing some marine communications. 2182 is the frequency that the US Coast Guard once monitored as a distress frequency, but no more.

According to Don: “Today 2182 kHz still gets some use as a calling frequency, where a ship and a shore station quickly arrange to have a conversation on another frequency. But the more common use now is for shore-based marine broadcasters to pre-announce marine information broadcasts they are about to transmit on other frequencies.”

Just the other day, I brought up 2182 on my Satellit 800, but the atmospheric noise was pretty bad. I fooled around with a couple of different indoor wire antenna configurations but wasn’t able to achieve any substantial improvement. But in the midst of that messing around, I “rediscovered” my Icom IC-706 MkIIG on a shelf. It receives from 30 kHz to 199 MHz and from 400 to 470 MHz, and I used mine for over a decade to run the Commuter Assistance Network on two meters. I still keep the 706 as a back-up in case my main rig for running the net goes down.

But I had never used the 706 extensively on HF (weird, I know, but that’s the truth). Nevertheless, a little voice in the back of my head (probably one of the brain dudes) kept saying “Why don’t you give the 706 a try as an HF receiver?”

So I did. I hooked up the 706 up to my horizontal room loop through some coax and an LDG 9:1 unun (the same antenna setup I had been using on the Satellit 800). And – shazam – the 706 is substantially quieter on 2182 with that antenna than the Satellit 800.

That’s good, I thought, but what if the 706 appears to be quieter because it is less sensitive? So I did some comparative tests with the 706 and the Satellit 800 on the 80 and 40 meter ham bands and satisfied myself that the 706 is both quieter and more sensitive than the Satellit 800. I could just plain hear the signals better (and more pleasantly) with the 706.

The only substantial weirdness with the Icom 706 MkIIG is that, as a small unit, it has relatively few buttons on its face. As a result, it has no keypad for direct frequency access. There are buttons for jumping from one ham band to another and another button for changing tuning steps, so with judicious use of those buttons and the tuning knob, it’s fairly easy to get from one frequency to another, but it is not as fast as direct entry.

And, of course, the 706 does not have all the cool seek-and-store functions and the like that are available on today’s really slick shortwave portables.

Here’s the upshot: if you’ve been on the hunt for a better HF receiver with single sideband capabilities, an old dog, like an old ham transceiver, might be just what you need. And if you are already enjoying an old ham transceiver as a shortwave receiver, I’d like to hear about it.

So, have I heard any of those cool MW maritime stations? Not yet, but I’m sure I’ll have fun trying!

Spread the radio love

Radio Waves: Maverick-603 SDR for FT8, EC-130J Commando Solo Final Broadcast, WRTH Survey, and Railways On The Air

2 Replies

EC-130J Photo By Staff Sgt. Tony Harp | An EC-130J Commando Solo aircraft from the 193rd Special Operations Wing performs a flyover during Community Days at the Lancaster Airport in Lititz, Pennsylvania, Sept.17, 2022. (Source: DVIDS)

Radio Waves: Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

RadioStack’s Maverick-603 Is a Fully-Functional Open-Silicon Software-Defined Radio for FT8 (Hackster.io)

Built using open tools and readied for manufacturing at SkyWater using the Efabless platform, the chip on this SDR is something special.

New Hampshire-based RadioStack is looking to launch a piece of amateur radio equipment with a difference: the Maverick-603 is powered by free and open source silicon, built using the Efabless platform at a SkyWater fab.

“Maverick-603 is the first affordable FT8 receiver board built around an RF receiver chip that was designed using fully open source tools and fabrication,” its creators explain. “It is capable of acquiring FT8 signals between 7MHz and 70MHz. With this frequency range, you will be able to receive signals from around the world with high accuracy. The use of our Low Noise Amplifier (LNA) will also give the chip the ability to amplify very low-strength signals, which is necessary for an effective FT8 receiver.” [Continue reading…]

EC-130J Commando Solo performs final broadcast (DVIDS)

MIDDLETOWN, PA, UNITED STATES
09.17.2022
Story by Master Sgt. Alexander Farver
193rd Special Operations Wing

Airmen from the 193rd Special Operations Wing here, who operate the only flying military radio and TV broadcast platform in the U.S. military, transmitted their final broadcast today to spectators at the Community Days Air Show at Lancaster Airport, Lititz, Pa., bringing to close a 54-year chapter in unit history.

The EC-130J Commando Solo mission has helped keep this Air National Guard unit’s aircraft and its Airmen at the tip of spear for nearly every major U.S. military operation since the Vietnam War. Before bombs dropped or troops deployed in the Global War on Terror following the attacks on Sept. 11, 2001, this specially modified aircraft was already over the skies of Afghanistan broadcasting to America’s enemies that the U.S. military was bringing the fight to them.

“Any world event or crisis that our military has responded to in recent history, our 193rd Airmen – and Commando Solo – were likely key components in that response,” said Col. Eric McKissick, 193rd SOW vice commander. “As we prepare to open a new chapter in our history, we thank those who have enabled us to be among the very best wings in the Air National Guard.”
The genesis for this airborne information operations platform can be traced back to 1968 when the 193rd Tactical Electronics Warfare Group received its first aircraft, called the EC-121 Coronet Solo. In the late 1970s, the aircraft were replaced by the EC-130E before finally being replaced by the current aircraft in 2003. Throughout its history, it was instrumental in the success of coordinated military information support operations, earning the wing the moniker of “the most deployed unit in the Air National Guard.”

These deployments included: Operation Enduring Freedom, Operation Iraqi Freedom, Operations Odyssey Dawn/Unified Protector in Libya, Operation Inherent Resolve, Operation Resolute Support/Freedom’s Sentinel, Operation Secure Tomorrow and Operation Unified Response in Haiti.

Although this unique mission has earned the wing many prestigious accolades, Lt. Col. Michael Hackman, 193rd Special Operations Squadron commander, believes the mission’s success and legacy lies in winning the hearts and minds of adversaries and providing vital information to allies, refugees and victims in times of crisis.

“This capability has been an essential tool in our nation’s inventory, from the battlefields to assisting hurricane and earthquake-ravaged nations,” Hackman said. “During this time, thousands of Pennsylvania Air National Guard volunteers fulfilled their call to duty in this unique capacity, leveraging this capability against U.S. adversaries and supporting allies while always fulfilling the unit tenet of ‘Never Seen, Always Heard.’”

Aside from sporting an impressive operational record, the aircraft holds another distinction with having completed over 226,000 hours of accident-free flying.

“Having that many thousands of hours of accident-free flying is a testament to the excellence of our maintainers, to the operators and anybody who has touched that aircraft. Thank you for leaving that foundation and setting that example that we’re building from,” said Col. Jaime Ramirez, 193rd Special Operations Maintenance Group commander.

McKissick believes the success of the 193rd in operating the Commando Solo mission over the past few decades has led to Air Force Special Operations Command selecting the wing to be the first and only ANG unit to operate the MC-130J Commando II. The Commando II flies clandestine, or low visibility, single or multiship, low-level infiltration, exfiltration and resupply of special operations forces, by airdrop or airland and air refueling missions for special operations helicopters and tiltrotor aircraft, intruding politically sensitive or hostile territories.
“Today we honor the men and women, past and present, who have served this unit and mission with unparalleled distinction,” said McKissick. “The Airmen who came before us created an enduring culture and spirit of hard work, innovation and grit. We thank them for that, and we will do our best to carry this forward.”

The final broadcast of the EC-130J was transmitted to the ground and played at the Community Days Air Show at Lancaster Airport. In the transmission, the wing thanked the local community for their support over the past 54 years before broadcasting the Santo and Johnny song, “Sleepwalk.” The transmission ended with the phrase, “Commando Solo, music off.” [Read the full article here…]

WRTH Reader Survey

The new owners of the World Radio TV Handbook who like your input as readers. Please click on this link and share your opinions with them!

Railways On The Air (Southgate ARC)

The South Eastern Amateur Radio Group (EI2WRC) will be active from The Waterford and Suir Valley Railway station Kilmeaden, Co. Waterford for the ‘Railways On The Air‘ event on Sunday, the 25th of September.

WSVR is a community heritage project. The project has enabled the magic of rails golden age to be brought to life in Kilmeaden. A heritage narrow gauge railway runs along 17 kilometres of the abandoned Waterford to Dungarvan line.

The South Eastern Amateur Radio Group would like to thank the manager Maria Kyte and all the staff of The Waterford and Suir Valley Railway for all their help and allowing us access to the station to do this event again this year. For more information about the WSVR please see www.wsvrailway.ie .

The September meeting of the South Eastern Amateur Radio Group EI2WRC will take place on Monday, the 26th of September 2022 at 8.00 p.m. sharp at The Sweep Bar, Adamstown, Kilmeaden, Co. Waterford, Eircode X91 H588. New members or anyone interested in learning more about amateur radio or the group are as always very welcome to attend.

For anyone that wishes to find out more about the South Eastern Amateur Radio Group and their activities you can drop them an email to southeasternarg /at/ gmail.com or please feel free to go along to any of their meetings. You can check their website www.searg.ie and you can also join them on Facebook and follow them on Twitter.