Category Archives: Preparedness

Hurricane Watch Net frequencies: monitoring “ground truth” observations

hurricane-matthew

As Hurricane Matthew makes its slow trek through the Caribbean, it is expected to have impact on the Bahamas, Florida, South Carolina and North Carolina. It has already battered Haiti and Cuba.

A few readers have asked about frequencies to monitor as the storm approaches.

Hurricane Watch Net (HWN)

hwn-hurricane-watch-netThe Hurricane Watch Net is a group of amateur radio operators who are trained and organized “to provide essential communications support to the National Hurricane Center during times of Hurricane emergencies.” The HWN focuses on “ground truth” observations (much like SkyWarn nets).

The Hurricane Watch Net is activated when a hurricane is within 300 statute miles of expected land-fall. The HWN covers the Caribbean, Central America, Eastern Mexico, Eastern Canada, and all US Coastal States.

The HWN operates in both English and Spanish, and is active on 14.325 MHz (upper sideband) during the day and 7.268 MHz (lower sideband) at night. The HWN is known to operate on both frequencies if propagation allows.

Please keep HWN frequencies clear

If you’re an amateur radio operator, please avoid using 14.325 MHz and 7.268 MHz anytime the HWN has been activated.

Other emergency net frequencies

ARRL Southern New Jersey Section manager, Skip Arey (N2EI), recently noted several other frequencies being used in the Caribbean:

“CO2KK reports the Cuba National Emergency Net is operating on 7110 primary, 7120 secondary in the daytime, with provincial nets on 7045, 7080 and possibly others. At night the primary is 3740 and secondary 3720. The main net control station is CO9DCN, operating from the Cuban National Civil Defense Headquarters, in Havana, with CO2JC in charge. Volunteer hams across the island nation are going portable to check on flooding of rivers and roads and plan to report in.

The Dominican Republic on Cuba’s eastern neighbor, the island of Hispaniola, is using 7065 kHz LSB for emergency communications.”

Please note these frequencies and, again, keep them clear of non-essential communications.

Monitoring hurricane frequencies

PL-660

If you have a shortwave radio with a BFO/SSB mode–and you live within the propagation footprint–you can monitor the Hurricane Watch Net.

Note that you’ll need to use upper sideband on 14.325 MHz and lower sideband on 7.268 MHz.

You can also monitor the Hurricane Watch Net via the following web stream: http://www.broadcastify.com/listen/feed/20970/web

Click here to view the Hurricane Watch Net website.

Spread the radio love

Unboxing the Sangean DT-160CL and setting up an endurance test

Sangean_DT-160CL_1

Yesterday, I received my Sangean DT-160CL–the correctional version of the DT-160–from AmazonSangean_DT-160CL_2

Even though the Amazon product page showed 5 units in stock on July 29, and though I get free two day shipping via Amazon Prime, my  DT-160CL took four business days to arrive. Out of curiosity more than anything else, I asked Amazon why the delivery would take four business days instead of two my Prime membership promises.

Amazon replied that stock levels weren’t correctly displayed on the product page at time of ordering since the DT-160CL was selling so quickly.
Sangean_DT-160CL_3

Amazon apologized for the confusion and–though I wasn’t seeking one at all–they issued a $10 credit!  Wow–thanks, Amazon!

Sangean_DT-160CL_4

The DT-160CL is supplied with a set of clear earbuds, an owner’s manual and a warranty card.

Sangean_DT-160CL_6

Sangean_DT-160CL_8

The Sangean DT-160CL is very close in size to the venerable Sony SRF-39FP–the SRF-39FP has slightly more depth and a little less height.

Sangean_DT-160CL_16

The DT-160CL’s clear case, while sturdy, feels marginally more supple than that of the Sony SRF-39FP.  Though I haven’t been able to confirm, the DT-160CL chassis feels like a polypropylene product while the SRD-39FP feels like polycarbonate. From the photos above, one can see that the DT-160CL’s case is a touch more opaque/cloudy than that of the SRF-39FP.Sangean_DT-160CL_10

Endurance test

Other than overall receiver performance, I’m very interested in battery performance since Sangean touts a 100 hour run time on two AA batteries (for the DT-160 series).

Having used the Sony SRF-39FP for a few years, I can attest to an incredibly long battery life as well. No doubt, those purchasing the DT-160CL for use in a correctional facility place a lot of value on battery performance.

Sangean_DT-160CL_13

I stopped by our local CVS pharmacy to purchase fresh alkaline batteries for both radios. CVS had a sale on their own (generic) version of the Duracell Quantum alkaline batteries.  I purchased a set and popped them in both radios.

Sangean_DT-160CL_14

The DT-160CL has a hinged battery cover and holds two AA cells.

Sangean_DT-160CL_15 Sangean_DT-160CL_16

The SRF-39FP only needs one AA battery.

Sangean_DT-160CL_17

After plugging in the supplied clear ear buds, I turned both radios on and adjusted the volume to a comfortable, moderate listening level.

I matched the audio levels for both units and tuned to my favorite classic rock FM station: WXRC 95.7 MHz.

WXRC is a fantastic benchmark FM station as it’s about 130 miles away (as the crow flies), but has an exceptional propagation footprint. My best FM receivers, when ideally-placed in my home, and telescoping antenna fully-extended, can receive WXRC in stereo lock with no interference.

Sangean_DT-160CL_21

I’m happy to report that both the DT-160CL and the SRF-39FP can receive WXRC quite easily when I’m holding the unit in my hand and standing in a part of my house where the signal is strongest.

In truth, I didn’t have time to evaluate receiver performance last night–I was more eager to begin the endurance test which, by the way, officially started yesterday (August 3, 2016) at 22:30 UTC.

I can’t wait to discover which radio will win!

Follow this review thread by bookmarking the following tag: Sangean DT-160CL v Sony SRF-39FP

Spread the radio love

Off-Grid Radio: Portable power recommendations?

Elecraft-KX3This year, I have a lot of portable radio play in mind as I travel across the continent. At some point, I even plan to spend several days in an off-grid cabin on the coast.

In the past, I’ve powered my 12 VDC ham radio transceivers with a system comprised of three PowerFilm solar 5 watt foldable PV panels (see below), a Micro M+ charge controller and several gel cell type sealed batteries (a couple 7 Ah and one 20 Ah).Powerfilm-Solar-Panel

The system works well, but the batteries are a little heavy and unhandy when I want to hike into a remote site or play radio on the beach, for example.

PowerFilmAACharger-1

In terms of receivers, my portables (like the Sony ICF-SW7600GR, Tecsun PL-660, etc.) simply use AA batteries which I charge with PowerFilm AA PV chargers (see above). My CommRadio CR-1a has an internal battery that will power it for hours at a time.

Power is much less of an issue with receivers because they’re quite resource efficient.

I mainly need a system to power my QRP ham radio gear, and that’s where I could use your experience!

Wish list

Charge controller

I need a new charge controller since my Micro M+ (no longer produced) is now being used to power a remote antenna tuner.

Of course, I’ll need an inexpensive charge controller that doesn’t produce RFI (radio interference).

It would be an added bonus if the charge controller could also charge my batteries when grid power is available.

12 VDC Battery packs

I’d like something relatively lightweight and safe.

Note: LiPo packs worry me, especially since I had one (an early GoalZero model) quite literally melt down and burn up on my bed only a few hours after bringing it back from an eight hour flight a few years ago. Scary!

Pure Sine Wave Inverter

PureSineWaveInverter

I’d also like a small, efficient pure sine wave inverter that I I could connect to my largest battery and power my laptop for extended SDR spectrum recording sessions while off-grid.

I’d love a recommendation from someone who uses one and can confirm a model that doesn’t create radio interference while operating.

Recommendations?

Post readers: Please comment with your recommendations and include model numbers and links if possible. Thank you in advance!

Spread the radio love

Expecting a winter storm? Ready your radio

Winter-Storm-JonasMany of us living in the eastern half of North America are bracing for a winter storm this weekend.

If predictions are correct, this storm could dump a lot of snow, sleet, and freezing rain in  many areas.

Winter-Storm-2Of concern to many is the potential for power loss across the region, should this storm have the expected impact. I, myself, live in a rural mountainous area and fully expect to lose power at some point this weekend. (Keep this in mind if you try contacting me.)

Often when a storm is pending, people rush to the stores to buy bread, milk, and eggs. What I concern myself with is stocking up on power!

And you can guess why.  It’s a fact, and a fun one: some of the best shortwave/mediumwave listening conditions happen during a regional power outage. The local noise level simply dives as noisy electronics take a temporary vacation…leaving an opening for some great SWLing.

Here’s my pre-winter storm checklist:

  • Charge batteries
    • Recharge AA cells for portables
    • Charge the internal battery in my CommRadio CR-1a
  • Have the World Radio TV Handbook handy
  • Have several flashlights at the ready (I’m especially partial to the HumanaLight!)
  • Make sure gasoline tanks for the portable generator are topped up
  • Fill the 4×4 with diesel
  • Charge my VHF/UHF Handy-Talkies
  • Oh, yeah…stock pantry/fridge with plenty of food and water

No power?  No problem!  While the snow blows, I’ll feed the fire in the wood stove, brew a steaming pot of joe with my syphon coffeemaker, and cozy up to my warm radio…for a long afternoon of listening.  Ahhh...

SWLing Post readers: How do you prepare for potential power outages?

Spread the radio love

Berlin group distributes tiny radio transmitters for Syria

In this photo taken Monday, Dec. 21, 2015, Philipp Hochleichter of the MICT (Media in Cooperation and Transmission) organization talks behind Pocket FM Radio Transmitters in Berlin, Germany. As part of the Syrian radio networking project, MICT has designed small modular FM transmitters. (AP Photo/Michael Sohn)

In this photo taken Monday, Dec. 21, 2015, Philipp Hochleichter of the MICT (Media in Cooperation and Transmission) organization talks behind Pocket FM Radio Transmitters in Berlin, Germany. As part of the Syrian radio networking project, MICT has designed small modular FM transmitters. (AP Photo/Michael Sohn)

(Source: Yahoo News via Dan Robinson)

BERLIN (AP) — On the top floor of an old brick building in the heart of Berlin, a group of journalists and tech enthusiasts are working to spur the Syrian media revolution.

Their weapon is an unassuming black case the size of a shoebox that allows opposition radio stations in Syria to transmit inside hostile territory.

Dubbed PocketFM, the device is basically a low-powered radio transmitter. Coupled with a satellite dish to receive new programs, a car battery for power and a one-meter (three-foot) antenna, it can broadcast FM radio within a 5-kilometer (3-mile) radius.

That’s enough to cover a town or a city district, said Philipp Hochleichter, who oversees development of the device for the Berlin-based nonprofit organization Media in Cooperation and Transition.

The group has been training journalists in conflict zones for more than a decade and often relies on FM radio to reach populations in far-flung areas that don’t have access to the Internet or smartphones. But when the group realized that shifting front lines and the brutal treatment of journalists meant operating large broadcast antenna could become too cumbersome or risky, it developed PocketFM.

Continue reading on Yahoo News…

Spread the radio love

Winners of the Virtual Radio Challenge IV: Emergency radio preparedness

Thank you to all of those who entered the Virtual Radio Challenge IV and many thanks to the good folks at CountyComm Government Products Group who volunteered an amazing prize package!

ivan-hurricane

David Cripe (NM0S), our judge for the Emergency Radio Challenge IV, has reviewed all of your challenge entries (click here to read full challenge details).

The following is Dave’s introduction, thoughts on emergency communications and assessment with comments and notes about the winning entries.  


Emergency radio communications

David Cripe (NM0S)

The Ozark Patrol regenerative receiver kit is only one of Dave's many 4SQRP kit designs.

The Ozark Patrol regenerative receiver kit is only one of Dave’s many 4SQRP kit designs.

Greetings to the SWLing Post readers and to those who participated in Radio Challenge IV. When Thomas asked me to judge this contest, I was honored, and eager to help out.

In introduction, I have been a licensed amateur radio operator for 34 years, holding the call NM0S. Thanks to the generous reviews on this blog, many readers may be familiar with my QRP radio kits produced through the Four-State QRP group.

In my home town, I’m know as the guy who does ham radio with the Boy Scouts, setting up and operating a full off-grid campsite field station at ARRL Field Day and the Scouts’ Jamboree On The Air. This has been a great learning experience both for the boys and myself, as a great way to determine what works and does not in less than ideal circumstances.   Professionally, I work for a defense contractor, with expertise in military radio systems and their power requirements.

On a personal note, I’ve had first-hand experience with emergency radio communications during the Mississippi River Flood of 1993, Hurricane Isabel in 2003, and the Cedar Rapids Flood of 2008. My evaluation of contest entries were based on these first hand experiences, and lessons learned from published accounts of other natural disasters.

The parameters of the Challenge were drawn from these first hand experiences.

“As is often said, stuff happens. Indeed, our modern communication infrastructure is a fragile thing. Let’s imagine that your area suddenly loses power–as well as cell phone and internet service–for an indeterminate period. Home and personal electronics remain unaffected, but must be powered off-grid (without mains power).  Moreover, you may be required to evacuate your home…perhaps even on foot….”

“Therefore, how do you intend to:

  1. obtain information about local and world events?
  2. communicate within your local region to assist emergency services?
  3. pass messages to friends and family over long distances?
  4. power your kit for an indeterminate amount of time?”

To make the evaluation of the contest entries as fair as possible, I kept off of the SWLing Post blog during the duration of the contest, arranging with K4SWL to send me the compiled entries with identifying information removed.

Equipment

Click to enlarge

In an emergency or natural disaster, as power and communication infrastructure is damaged or degraded, the main avenue for transmission of information to the populace will be the oldest and most common broadcast medium – AM radio.

Most middle-sized towns have a station, and most families have a battery operated portable receiver. The local new/talk station will become a conduit of information on hazards, evacuations, and requests for assistance. This essential component of the emergency communications kit is the item that most people already have.

There are other sources of information that can provide detail that will not be presented in a radio broadcast. A VHF/UHF scanner pre-programed to local utility frequencies, as well as FRS and GMRS frequencies will let you monitor emergency responder traffic, as well as up-to-date NOAA weather broadcasts.

Those bearing an amateur radio license have the opportunity to not only monitor, but to participate in disaster relief. If two-meter repeaters remain in operation, amateur radio operators have often served to supplant or replace overloaded phone services between hospitals, police, and other first responders.

Tecsun-PL380-TemperatureWhere the devastation from a disaster is more extensive, or if you are forced to evacuate to a remote location, local communication infrastructure may be completely absent. Shortwave radio broadcasts from around the world can supplement local broadcast media. To handle health and welfare messages from an isolated group, when cell phone reception is absent, long-haul radio capability is required. In many disasters, this has been commonly done using portable HF radio transceivers.   When our Boy Scout troop embarks on a high-adventure trip, a satellite phone is packed along. This alternative has the advantage of being able to be used reliably without any skill or licensing.

Amateur radio

Yaesu-VX-3RThis raises a valuable point: there has been in recent years a surge of interest in amateur radio among those interested in emergency communication and preparedness.

Amateur radio is a powerful tool for communication, and can be an invaluable emergency resource. However, without the user skills acquired through their frequent use before an emergency occurs, the challenge of operating unfamiliar radio equipment in a critical situation greatly reduces their utility.

Without practice in using repeaters, participating in nets, or passing message traffic, the added stress of having to learn these skills under pressure may make a bad situation worse. In short: if you get an amateur license and equipment, use them.

Power

battery-levels-full-001A further requirement is the ability to power the communication equipment. Power-hungry transmitters will burn through batteries quickly.

The selections available for rechargeable batteries are numerous, but options for charging are somewhat more limited. Thin-film solar panels have recently become an economical power choice for portable operations. Other options, such as hand-crank generators and thermoelectric converters can provide power when sunlight is not available.

Challenge entries

With the Challenge entries in hand, it was a matter of evaluating each versus the stated goals of the Challenge.   I was impressed by the documentation accompanying most entries, and justification of choices made.

Nearly every entry specified a portable general-coverage receiver with shortwave and SSB.

The Tecsun PL-660 was a popular choice. Radios of this type are very versatile, reasonably economical, and capable of receiving a wide variety of broadcast signals.

Many of the entries included a BaoFung dual-band HT. This is another excellent choice. Although lacking features found in more expensive HTs, they have the capacity to perform scanning, and can be pressed into service as a FMR or GMRS transceiver in an emergency, The economy of these radios makes their inclusion an obvious choice.

Most entrants showed a great degree of thought in their selection of power sources. Many included solar panels or hand-cranked generators to maintain power over long-term operation.

A minority of entries added equipment capable of long distance two-way conversation. For the most part, these consisted of low-cost fixed-frequency QRP CW transceivers such as the Chinese Pixie or Frogsounds kits. The shortcomings of these kits is having the skills needed for proficient operation–thus limiting their utility–but they are better than nothing.

The Winning Entry: Mehdi

One entry took a different approach to long-distance communication; I consider it the winning entry.

The following was the entry submitted by Mehdi:

Here are my thoughts on how to prepare for the virtual Radio Challenge IV:

I’ve already had this idea on my mind, because I live in a densely populated city (Tehran) and the possibility of an earthquake in near future is not improbable, so the least I could do is to be mentally prepared.

I’ve already bought things like torch, portable radio, and even a real US military compass!!

As for radio kit, first, here’s the list:

Image Source: Anon-Co

1- Tecsun PL-310ET
price: 45$ (free shipping)
link: http://www.aliexpress.com/item/2013-new-style-TECSUN-PL-310ET-FM-AM-MW-SW-LW-DSP-Receiver-WORLD-BAND-Shortwave/861504947.html

duracell

2- Pack of 12 AA Duracell batteries
price: 12.70$ (free shipping)
link: http://www.ebay.com/itm/Duracell-Genuine-AA-Size-Alkaline-Battery-12PCS-Retail-Packing-/300811818605?hash=item4609c8166d:m:mTlbVZ55FLboMa6-9csJOpA

UV-5R

3- BaoFeng UV-5R
price: $25.15 (free shipping)
http://www.amazon.com/BaoFeng-UV-5R-Dual-Radio-Black/dp/B007H4VT7A
link: http://www.amazon.com/BaoFeng-UV-5R-Dual-Radio-Black/dp/B007H4VT7A

4- BaoFeng spare batteries
price: 15.69 * 2 (free shipping)
link: http://www.amazon.com/gp/product/B00LAPTWE4/ref=s9_al_bw_g422_i2

Thuraya-sat-phone

5- Thuraya SG-2520 satellite phone
price: 76$ (+ 6$ shipping). Used
http://bit.ly/1PRpOdI

6- Thuraya SG-2520 heavy duty battery
price: 69.95$ * 2 + 11.86$ shipping (estimated)
link: http://www.satphonecity.com/products/thuraya-heavy-duty-battery-so-2510-sg-2520.html

7- Thuraya pre-paid SIM
price: 50$ (free shipping)
link: http://www.amazon.com/gp/product/B00J9O5Y7C/ref=s9_dcbhz_bw_g107_i3_sh

First of all, I chose the Tecsun PL-310ET for this scenario. Why?
I need a light portable radio and it’s got all the functionality I require (AM/FM for local/regional news and SW for international news). I don’t need weather broadcast as we haven’t got that service here. SSB is also not required (found in better models like PL-660). I have also added a 12 pack of AA batteries for it.

The third item is a cheap and small VHF/UHF two way radio which lets me listen to local authorities (fire/emergency/…) and other organizations’ radios and also communicate with them in case of emergency. It can also be operated on FRS/GMRS. I’ve also included two spare batteries. (Because the total price of all is above 35$, they’ve got free shipping).

And about Thuraya phone: I chose it because it’s easier to use and smaller/lighter than a portable HF rig. I have also considered portable HF transceivers before, but they have a few problems:

1- Need good power source
2- Propagation affects it (and regarding propagation, we’re not in a very good time now)
3- Not everyone can operate them easily
4- It needs an antenna to be set up
5- A good rig (even a used one) is more expensive than our budget.

I’ve also selected two spare batteries for Thuraya plus a SIM card.

The sum of all these items is $397.99 and I’ve considered portability, availability and power selecting these gadgets. I also should stress that I have also considered the compatibility and availability of these gadgets in my own country, so it may not be the best match for US citizens. I’m not sure if Thuraya has US coverage, so it could be replaced by something like Iridium or InmarSat. Also, US citizens may benefit from Weather/NOAA enabled radios.

If I were allowed to spend a little bit more, I would include a solar panel charger (about 20 dollars) too.

It’s just the “radio” related part and I will carry other necessary items in my bag (torch, knives, water, lighters, etc)

P.S. My solution is based on some presumptions, most important of them is leaving house on foot. If I were allowed to spend more and I could bring my car with myself, I probably would select a Yaesu FT-817 which operates on HF/VHF/UHF bands and can be powered from car battery and just needs a car-mounted antenna (It can be replaced with all above items).

Dave’s Analysis:

To a kit containing a BaoFung HT and a Tecsun PL-310, Mehdi added a Thuraya satellite phone. Even though I am a ham radio fanatic with a bias toward HF radio operation, I recognize that the ability to achieve reliable worldwide communication using a device with a minimal operator learning curve gives it a clear advantage for communication in an uncertain environment.

While Mehdi specified a list of battery options for his setup, he was not able include a means of recharging within the $400 budget. He did, though, mention the possibility of adding a low cost solar panel, substituting it for one of the spare battery packs would have been a prudent option.

While Mehdi’s solution is very good, it should be recognized that the satellites employed by the satellite phones do have vulnerability to EMP and CME, as would any other communication method requiring terrestrial infrastructure. I would prefer to see a high-end HF transceiver included as part of the communication package, though this is very challenging within the cost target of the Virtual Radio Challenge. Within that cost constraint though, the satellite phone is an excellent choice.

Runner-up: Ashok

A very close runner up is the entry submitted by Ashok, who in his write-up described his emergency experience during the landfall of a super cyclone in his home of Cuttack, near the Bay of Bengal.

The following was the entry submitted by Ashok:

During October 1999, there was a super cyclone in Bay of Bengal. The land fall of the cyclone was near Paradeep port in the Coastal district of Jagatsinghpur.

Cyclone_05B

Cuttack, my QTH, is about 90km by road and about 70km by air. The intensity of devastation happened in cuttack due to Super Cyclone is frightening. Till date those who have face to face with that have never forget the dreaded situation that day.

In the morning at 9:00 AM wind started and power supply failed within 5 minutes. The only way to get news was through radio.

Unfortunately, we were not aware that such a severe cyclone is on the way, so batteries for radio and flash light were not available. My Father and Uncle were worried and wanted to know what is the situation and precautions we should take. As batteries are not available, I reached out to my “junk box”.

I found a IN34 diode an MW antenna coil a 2j Gang capacitor a old telephone earpiece. Immediately I joined them in to a “Crystal Radio” (no soldering just connected those with hookup wires). I managed to receive Local HPT MW broadcast station AIR Cuttack.

Gradually wind condition and rain got worse with the passing time.

In the evening about 8pm I heard the announcer saying “only GOD can help us survive this cyclone–we wish to speak to all our listeners tomorrow, if we survive” and after that suddenly the transmission is broken and nothing is heard. Later we learned that the transmitting tower was uprooted.

Since then, Odisha has faced major cyclones like Phailin (October, 2013) and Hudhud (October, 2014). Though the devastation is not that widespread but damages are too heavy for a poor state like Odisha.

My Take
Currently I am trying to get a Restricted grade or General grade Ham Radio license. After I get the license I can operate in the HAM bands, but Citizen Band radio doesn’t require a license in India, hence currently I have only one FRS radio (though FRS and CB radios are not popular in my part of India). Still there is a hope that a nearby monitoring station or defense establishment may pick up my signal and may come to rescue.

What I propose is as follows.

TecsunPL-660-Silver

1) A very good standalone radio receiver (Eg. the Tecsun PL-660). A World band radio can be useful to get news from any available station nearby. The stations in the area hit by cyclone may not have any transmission facility, hence nearby broadcast stations can relay news about the situation.

2) Food
Keep dry foods: Biscuits and sliced breads, 4 liters of drinking water

My prior experience says one must be prepared for 3 days survival. To survive in a natural calamity like a cyclone, food and water is a must. 2 packs of biscuit and 4 liter of water is enough for only one day. Next 2 to 3 days can be managed after the cyclone recedes by exploring nearby area.

3) Medicines
i) Antiseptic cream 1 small tube
ii) Chlorine tablet for water purification
iii) Paracetamol tablet 1 strip
iv) Anti Diarrhea tablets
v) Anti acid/Gastro regulator tablets
vi) bandages 1 or 2 rolls
vii) clinical alcohol for disinfection

In emergency situations generic medicines are vital for survival to fight odds. these medicines are for tropical cyclone survival.

4) few matchboxes or cigarette lighter, candle
to light up the shelter in the night candle is needed. to make fire to survive cold matchbox or candle is needed

5) A Craftman’s knife
To cut clothes, scale wood for fire.

Two-Way Communications:

Pixie-QRP-Kit-s-l500

6) PIXIE like transceiver for SOS use
PIXIE transceivers are easy to construct, very small in size and Low power consuming QRP devices. situations like natural calamities or devastation need smaller devices. it also can be powered from a 9v transistor battery.

YouKits

7) Hand-held HF SSB Transceiver (DK7IH Handheld QRP SSB Transceiver or TJ2B Portable 4 Band)
Baofeng UV-5R VHF/UHF Transceiver
Voice communication is needed as we can communicate naturally with peers at other end and can convey our feelings easily.

Also there is a psychological factor: when we hear a comforting voice we gather our courage and patience.

8) A QRP antenna tuner
Antenna tuners come in handy as we don’t have proper antenna during and after disaster.

9) A very long electrical wire. (Twin flexible wires are also good)
Wires are needed for antenna and also can be used for fastening

12V-Battery

10) A 12v 7amp hour maintenance-free rechargeable UPS battery.
this is the prime battery for several purposes.
i) Lighting the place with LEDs 4White LEDs plus 1 red LED in series can be connected across 12v
ii) powering the TRX Both DK7IH trx and Pixie

11) 9v batteries (quantity of four)
I mentioned 4 batteries as a careful guess work and my previous experience of 1999 cyclone. (We were cut off from the world for 15 days!)

With 4 9v transistor batteries and the Pixie QRP transceiver, I can use it in extreme condition.

12) 1.2v NiMH battery packs
These batteries are needed by the DK7IH transceiver, so 1 or 2 sets extra will be nice to have.

13) Solar charger for 12v
To charge DK7IH trx batteries. and also for charging the 12v UPS battery. Can be usable after the cyclone recedes. Cloud cover recedes few hours after landfall.

14) Hand crank or cycle dynamo. (needed if the situation is extreme and not much sunlight) OPTIONAL…

Prices

Hand-crank generator = $111.32

Weight Factor:
The most heavy parts are 12V 7Ah battery (2 Kg approx), next heavier thing is solar panel around 1/2 Kg.

The Tecsun PL-660 is next 470 grams. So total weight of communication system and power sources combined won’t exceed 5 Kg, Which is comfortable for a back pack.

End Thoughts:
The above prices are for radio communication purpose only. But survival of a cyclone not only depends on communication. It needs a presence of mind and making the right decisions.

The DK7IH hand held transceiver is a very compact and nice looking rig. I have it in my wish list I guess it wont exceed more than $100.00.

A hand crank genset is good for situations when sunlight is not available. But it can be considered optional.

I have considered the 12v 7Ah lead acid maintenance free battery from Indian market it costs Rs.850.00 which is $16.00 approximately.

So if we calculate the prices of all the materials then it will cost $336.45. If a hand crank generator is added to this list it will go to $447.77

If I am not taking the hand-crank generator then the remaining money i can go for few meters of wire, some biscuits and water bottles for me and other survivors.

Dave’s Analysis

Ashok’s setup included a Tecsun PL-660, a Baofeng UV-5R, a Pixie, a wire antenna and QRP antenna tuner, and a homebrew 20M SSB transceiver based on the DK7IH design.

Power was provided by 12v, 7AH SLA, and NiMH AAA batteries, recharged by a solar panel. Ashok also had budgeted emergency food and first aid supplies, which while not required in the Challenge, are still an important consideration for emergency preparedness. While the 20M SSB transceiver is not as reliable for long-distance communications as a satellite phone, it does have one important advantage: it is not reliant on satellite infrastructure that would by impacted by EMP or CME.

As I write this, there is a massive relief effort underway in Chennai India as devastating floods affect the region. There are reports of amateur radio operators providing emergency communication to those affected. Lessons learned from this tragedy will help guide us for future emergencies. Exercises like this Radio Challenge help prepare us to face these very kind of situations.

Thank you all for your time and effort.

-Dave Cripe (NM0S)


Thank you!

First of all, I’d like to thank all of those who entered the Virtual Radio Challenge!  The Virtual Radio Challenge IV was probably the most demanding of any reader challenges we’ve posted so far.

Congratulations to our winners: Mehdi and Ashtok!

CountyCommNewWhiteI would also like to thank CountyComm Government Products Group. Readers should know that Nick, with CountyComm, is a ham radio operator and regular SWLing Post reader. When Nick read about our third radio challenge, he wanted to sponsor our next challenge. Fortunately, I had already started working on a draft of this challenge in the SWLing Post hopper. CountyComm was a perfect fit as a sponsor since much of their product line is used either in tactical situations or for emergency preparedness. Nick went above and beyond the call of duty with his prize package–he has been an enthusiastic supporter. Having a prize makes the whole hypothetical challenge even more fun. Thanks, Nick!

Last but not least, I’m very grateful to our judge, David Cripe (NM0S). Dave is a busy guy in both his professional life and in his spare time. When I approached him about being a judge, he knew it would entail hours of research. This was a blind evaluation–Dave only knew entrants by first name or initials. He spent several days worth of his spare time during the Thanksgiving holidays researching product specifications, comparing, evaluating and picking our winners. He is the most knowledgable engineer I know on this particular topic, too. We’re quite fortunate to have him as a resource for this challenge. Thank you so much, Dave!

Early in 2016, I’ll post another–completely different–radio challenge. Like our other challenges, it is based on actual SWLing Post reader questions. I believe it will be a more accessible challenge for those of you who are new to shortwave and ham radio.

Stay tuned!

Spread the radio love

Scott’s Elecraft KX3 Go-Box

Many thanks to Scott (AK5SD) who shares the following photos and bill of materials for his custom Elecraft KX3 go-box:


IMG_0531 IMG_0534

IMG_0532 IMG_0535 IMG_0537 IMG_0536

Bill of materials

The panel was custom laser cut by Front Panel Express. I have the CAD
file and I’m willing to share it with anyone who wants to reproduce my effort.

Amazon.com
Case B&W Type 1000 Outdoor Case with SI Foam
You won’t use the foam, so you can buy the version without it if you can find it cheaper.

Battery Anker Astro Pro2 20000mAh Multi-Voltage (5V 12V 16V 19V)
Portable Charger External Battery Power Bank
Avoid look alike batteries and the next generation model from Anker. The newer Anker
battery is only capable of delivering 1.5A from the 12V supply. Two look alike batteries
I tried did not have the auto-off feature that the Anker does.

Vetco.net
ACC2 and I/Q Jacks 2 x 2.5mm Stereo Jack Panel Mount (PH-666J-B)
Phone, Key, and ACC1 3 x 3.5mm Stereo Jack Panel Mount (High Quality) (PH-504KB)
Mic Jack 1 x 3.5mm 4 Conductor Jack Panel Mount (PH-70-088B)
12V IN and CHG IN 2 x 2.1mm DC Power Panel Mount Jack (PH-2112)
12V OUT 1 x 2.5mm DC Power Panel Mount Jack (PH-2512)

You also need plugs and wire for interconnects. I bought some 2.5mm (CES-11-5502)
and 3.5mm (PH-44-468 for stereo, PH-44-470 for 4-conductor) audio cables with right
angle plugs and just cut them to use for the signal lines going to the KX3. I did the same
thing for the 2.5mm (PH-TC250) and 2.1mm (PH-TC210) power cables. A couple of
caveats are in order. The Phone, Key, and ACC1 interconnects require low profile
right angle connectors. The cables I listed above won’t work. Vetco part number
VUPN10338 will work. The power cables I’ve listed above use 24 gauge wire. This
is a little light, but the runs are small so I think it is OK. You can use higher gauge
cables if you can find a source.

USBfirewire.com
USB OUT USB 2.0 Right Angle Extension Cable (RR-AAR04P-20G)

Digikey.com
L Brackets 8 x Bracket Rt Ang Mount 4-40 Steel (612K-ND)
These L brackets are used to mount the KX3 to the panel and the panel to the case.
For mounting the KX3, I use a little piece of stick on felt on the bracket to protect the
KX3’s cabinet from damage. Replace the KX3’s screws with #4-40 Thread Size, 1/4”
Length Steel Pan Head Machine Screw, Black Oxide Finish (see below). For the panel
mounting, use #6-32 Thread Size, 3/16” Length self tapping sheet metal screw. You
may need to cut the tip off in order to not puncture the outside of the case.

RG316 BNC Male Angle to BNC Female SM Bulkhead Coaxial RF Pigtail Cable (6”)
This is not the original interconnect I used for connecting the KX3’s antenna output to
the panel. However, I think it is a better option for new designs. The caveat is that you
will need to verify the hole in the panel matches the bulkhead connector on this cable.
There will be a little loop in the cable when you are done, but that is fine.

Micrfasteners.com
Screws for Sound Card 2 x FMSP2510 – M 2.5 x .45 x 10mm
Screws for KX3 Bracket Mount 4 x MSPPK0404 – 4-40 x 1/4
Screws for Countersunk Panel Holes 8 x FMPPK0403 – 4-40 x 3/16
Screws for USB Connector *** 2 x FMPPK0406 – 4-40 x 3/8

I’m pretty sure these are the right length for the USB connector. I am doing it from memory.

Amazon.com or eBay.com
Soundmatters foxL DASH A Wireless Bluetooth Soundbar (OPTIONAL)

Sonoma Wire Works GJ2USB GuitarJack 2 USB Portable Audio Interface (OPTIONAL)
(Make sure you get the USB model, not the 30-pin model.)

This is optional if you want a built-in sound card interface for a waterfall display using iSDR. Make sure to eliminate the holes in the upper left corner of the panel if you are not installing. You will also need 2.5mm x 10mm screws to mount this to the bottom of the panel (see below).

bhi Compact In-Line Noise Eliminating Module (OPTIONAL)

In my opinion, the KX3’s noise reduction is totally ineffective for SSB communications. This external noise reducing DSP is one solution, albeit an expensive one, to that problem. It is only for SSB, not CW or digital modes. It is also available from GAP Antenna Products.

IMG_0530


Scott: you have done a beautiful job here and have spared no expense to make a wonderfully-engineered and rugged go-box. No doubt, you’re ready to take your KX3 to the field and enjoy world-class performance on a moment’s notice. 

Though I’ve never used them personally, I’ve noticed others who have taken advantage of the Front Panel Express engraving service–certainly makes for a polished and professional front panel.

Again, many thanks for not only sharing your photos, but also your bill of materials which will make it much easier for others to draw inspiration from your design!

AK5SD_QSL_Card

Speaking of designs, when I looked up Scott on QRZ.com, I noticed that he also sports a QSL card (above) designed by my good friend, Jeff Murray (K1NSS). Obviously, Scott is a man with good taste!

Spread the radio love