Tag Archives: Go Kit

Giuseppe’s improved read-to-go case for the Tecsun S-8800

Many thanks to SWLing Post contributor, Giuseppe Morlè (IZ0GZW), who writes:

Dear Thomas,

I want to share my latest version of my case / antenna for Tecsun S-8800 to make it immediately operational: simply open and listen.

In addition to the loop inside the case with a 3-meter wire at one of the ends that join two telescoping style whips of one meter each short-circuited to take advantage of the entire length. At the other end of the loop, a cable that goes to the ground of the variable capacitor.

I can tune the whole range from 3 to 16 MHz with truly amazing results.

You can see the video from my Youtube channel at the link:

Thanks to you and all the friends of SWLing Post.
Regards.
73. Giuseppe Morlè iz0gzw.

This is incredibly clever, Giuseppe! AS I mentioned before, I love how self-contained this makes the entire listening station and I especially love the built-in antenna options! This is truly a shack-in-a-case!

Thank you for sharing this.

Click here to read Giuseppe’s other contributions here on the SWLing Post!

Spread the radio love

Proper Radio Prepping: Keep a kit that is always ready to hit the field!

My Red Oxx Micro Manager packed with a full radio field kit

Yesterday, my family packed a picnic lunch and took a drive through Madison County, North Carolina. It was an impromptu trip. Weather was forecast to be pretty miserable that afternoon, but we took the risk because we all wanted to get out of the house for a bit.

Although that morning I had no intention of performing a Parks On The Air (POTA) activation, my family was supportive of fitting in a little radio-activity, so I jumped on the opportunity!

A quick glance at the POTA map and I determined that the Sandy Mush State Game Land (K-6949) was on our travel route. Better yet, the timing worked out to be ideal for a lunch picnic and before most of the rain would move into the area.

Ready for radio adventure

I had no time to prepare, but that didn’t matter because I always have a radio kit packed, fully-charged, and ready for the field.

My Red Oxx Micro Manager EDC pack (mine is an early version without pleated side pockets) holds an Elecraft KX2 field and antenna kit with room to spare (see photo at top of page).

The Micro Manager pack easily accommodates the entire kit

This 20 year old blue stuff sack is dedicated to antenna-hanging. It holds a reel of fishing line and a weight that I use to hang my end-fed antenna in a tree or on my Jackite telescoping fiberglass pole. The sack also accommodates a 10′ coax cable.

The Elecraft KX2 transceiver, EFT Trail-Friendly Antenna, hand mic, CW paddles, C.Crane earphones, and wide variety of connectors and cables all fit in this padded Lowe Pro pack:

The advantage to having a simple, organized radio kit at the ready is that everything inside has its own dedicated space, so there’s no digging or hunting for items when I’m ready to set up and get on the air.

This level of organization also makes it easy to visually inspect the kit–missing items stand out.

Yesterday I parked our car at one of the Sandy Mush Game Land parking areas, deployed my field antenna, and was on the air in a matter of seven minutes at the most.

Hunter Parking Area Sign

Technically, this should read “Activator” parking area! (A questionable inside joke for POTA folks!)

We planned for heavy rain showers, so I fed the antenna line through the back of my car so that I could operate from the passenger seat up front.

I also brought my Heil Proset – K2 Boom Headset which not only produces better transmitted audio than the KX2 hand mic, but it frees up my hands to log stations with ease. This is especially important when operating in the front seat of a car!

The great thing about the KX2 is that it’s so compact, it can sit on my clipboard as I operate the radio (although typically I have an elastic strap securing it better). Since all of the KX2 controls are top-mounted, it makes operation a breeze even in winter weather while wearing gloves.

Since I routinely use the KX2 for shortwave radio broadcast listening as well, I know I always have a radio “locked and loaded” and ready to hit the air. My 40/20/10 meter band end-fed antenna works well for the broadcast bands, as long as there is no strong local radio interference (RFI). When I’m faced with noisy conditions, I pack a mag loop antenna as well.

What’s in your radio go-kit?

Having a radio kit stocked and ready to go on a moment’s notice gives me a great sense of security, and not just for recreational ham and shortwave radio listening reasons.

Sometimes I travel in remote areas by car where I’m more than an hour away from the nearest town and where there is no mobile phone coverage.

If my car breaks down, I know I can always deploy my radio kit and get help from the ham radio community in a pinch. Herein lies the power of HF radio!

If you haven’t built a radio go-kit, I’d highly recommend doing so. Although I’m a bit of a pack geek, keep in mind that you don’t need to purchase special packs or bags for the job. Use what you already have first.

I’m plotting a detailed post about the anatomy of an HF radio field kit. In the meantime, I’m very curious how many of you in the SWLing Post community also have a radio kit at the ready–one based on a transceiver or receiver.  Please comment!

Better yet, feel free to send me details and photos about your kit and I’ll share them here on the Post!


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

A review of the Red Oxx “Lil Roy”: an excellent radio kit bag

Yesterday, I posted some photos of the yet-to-be-released CC Skywave SSB and a number of readers had the same reaction as Frank (K4FMH):

“Who makes and sells your canvas bag? Inquiring minds want to know!”

Frank was referring to the bag in the background on many of the radio shots–and he wasn’t alone in his inquiry. I received a few email messages and inquiries on Facebook about this bag.

Be warned: I’m an avid bag and pack geek. If you find the topic boring, you should run away now!

The Red Oxx “Lil Roy”

The Lil Roy might look like a typical canvas bag.  But the Lil Roy isn’t made by the typical pack manufacturer–it’s made by Red Oxx Manufacturing in Billings, Montana, USA. Red Oxx gear isn’t just designed in Montana, it’s made in Montana. The two leaders,  Jim Markel and President Perry Jones, are military veterans and bring mil-spec quality to all of their products.

I love the design of Red Oxx bags–they’re not tactical, but they’re not really low-profile or urban either. Markel describes the design as:

“Tactical strength without looking like you’re going to war.”

I was first introduced to Red Oxx gear in 2012 when I traveled to a meeting in Denver with my good friend Ed Harris (who is an SWLing Post reader).

Even though Ed and I had traveled together in Belize and had known each other for quite a while, I never realized he was a one-bag traveler like me. Once the topic came up, we proceeded to talk about our main travel bags. Ed showed me his Air Boss by Red Oxx.

The Red Oxx Air Boss.

I instantly fell in love with the overall quality and the bold Red Oxx design.

All Red Oxx bags are manufactured to the company’s high standards, including the Lil Roy

Four portable radios, an antenna reel and earphones all easily fit into the Lil Roy with room to spare.

Though it looks like a canvas bag, the Lil Roy is made of 1000 weight CORDURA nylon. Red Oxx uses super strong UV resistant threads in the stitching and into every seam. Each stress point is box stitched.

Red Oxx uses large, pricey #10 YKK VISLON zippers on all of their bags. They slide beautifully and if you don’t zip up the bag completely, the zippers won’t slide back open–they essentially lock into place. They’re even field-repairable.

Inside the Lil Roy you’ll find two “stiff mesh” pockets on each inside wall with Red Oxx Mil-Spec snaps to keep things contained.

FYI: If you ever want to check the quality of a bag or pack, flip it inside out and look for frays, bad stitching and incomplete seams. Cheap bags are loaded with them–you won’t find one thread out of place on a Red Oxx bag.

While the Lil Roy is a small bag, I’ve found that it holds a lot of stuff. This month, I’ve had no less than four radios to beta test and review. I found that the Lil Roy can hold all of my portables and accessories, making it easy to grab the whole lot and take them to the field for testing.

While in Canada this summer, I had to do all of my radio listening and testing in the field. I was able to pack my portable radio and my recording gear into the Lil Roy with room to spare.

Listening to the 2017 BBC Antarctic Midwinter Broadcast from the back of my vehicle in Saint-Anne-de-Beaupré, Québec, Canada.

I’ve also packed my CommRadio CR-1a, NASA PA-30 antenna and all assorted cables for a little weekend travel and radio fun. The Lil Roy easily accommodated everything. In the photo below, I simply placed the CR-1a inside (on top of the CC Skywave and CC Skywave SSB) to show how much room there is to spare:

So are there any negatives? Perhaps one: the Lil Roy was never designed to carry radio equipment, so there’s no padding inside.

Indeed, I believe Red Oxx initially designed Lil Roy for someone who wanted a bag to hold their car chains. Of course, most customers use the Lil Roy as an electronics organizer–something to hold tablets, Kindles, cables, etc. Some even use it as a packing cube.

Since there’s no padding in the bag, I’m selective about what I put inside and how I pack it. Most of my portables have soft cases that protect them anyway. When I put something like the CommRadio CR-1a inside, I enclose the radio in a soft padded sack. Even though the sack makes the CR-1a bulkier, the Lil Roy can still easily accommodate it.

In general, Red Oxx gear is considered pricey by most standards. After all, you’re purchasing products wholly designed and made in the United States, so US wages are baked into that price. On top of that, Red Oxx backs all of their stuff with what they call a “No Bull” no question’s asked Lifetime Warranty. Because of this warranty, Red Oxx gear holds its value amazingly well. The warranty still holds even if you purchase the bag used.

I also believe when you’re purchasing from Red Oxx, you’re supporting a good local company that does one thing and does it very well.

The Lil Roy retails for $35 US. I think it’s a fantastic value for a simple, rugged bag that can be used in a variety of applications. The longer I’ve had it, the more uses I’ve found.

I’m considering purchasing the Red Oxx Mini Boss or possibly Skytrain in the next few months to replace my Timbuk2 Small Wingman.

Told you…I’m a pack geek! Don’t say I didn’t warn you! 🙂

Click here to check out the Lil Roy at Red Oxx Manufacturing.

Post readers: Red Oxx is one of three quality pack manufacturers I support–Tom Bihn and Spec Ops Brand are two others. Do you have any favorites?  Please comment!

Spread the radio love

A very clever radio go-box using the Gator GR6S shallow rack case

(Source: Southgate ARC)

Young radio amateurs Zechariah WX4TVJFaith Hannah AE4FHHope KM4IPF and Grace KM4TXT have released a video about their Go Box

Many people have asked us to make a detailed video about our Go Box, so we decided to make one. We show you what is in the Go Box and how we installed all of the equipment. There is also some funny stuff in the video, too!

The case we used was a Gator 6 rack unit shallow case:
https://www.bhphotovideo.com/c/product/252763-REG/Gator_Cases_GR_6S_GR6S_Shallow_Rack_Case.html

The shelves are simply vented rack mount shelves. Here is a link to where you can get them:
https://www.sweetwater.com/store/detail/RkShelfU1

Watch A Close Look at Our Ham Radio Go Box and How We Put it Together:

Click here to view on YouTube.

Lea Family
http://hamradio.world/

These girls do an amazing job with the video–bravo!

I love this setup. While I typically pack very lightly for portable radio work, building a system like this makes for very quick deployment when you require a full 100 watt system with multiple radios and multiple accessories. Radio clubs could easily put systems like this together for events like Field Day or Emergency Comms. It’s grab-and-go at its best!

Of course, a field DXpedition/SWLing station could also be easily built into this portable system. In fact, I bet an SDR with computer, keyboard, and monitor could be mounted and accommodated in this space.

Spread the radio love

London Shortwave’s portable “spectrum capture lab”

SWLing Post contributor, London Shortwave, just posted a photo of his portable SDR setup on Twitter and noted:

LondonShortwave-Portable-SDR

“Portable spectrum capture lab back in operation. Grabbing the grey line hour on the 49 mb. Listening to Radio Fana!”

Wow!  I love this go kit!

Looks like London Shortwave is running an AirSpy with Spyverter via SDR# on his Windows tablet.

Having played a lot of radio in the field, I think what’s great about this setup is the fact it’s all contained and properly laid-out inside the padded case. Simply open the case, deploy an antenna, and you’re in business! With all components inside the case, there’s much less chance a connector, battery, cable or SDR will be left in the field accidently. Quick deployment and quick pack-up time; that’s what it’s all about!

Great job, London Shortwave! I’m happy to see you’re back in the park capturing spectrum and logging DX!

Spread the radio love

Mark’s Icom IC-7100 go kit

Click to enlarge

Click to enlarge

Many thanks to SWLing Post reader, Mark Hirst, who writes:

Thomas,

I have been very impressed by the shacks featured on SWLing !

I don’t really have the room to accommodate such large collections, or to dedicate a special area to just radio.

I tend to perch a radio on a spare surface in the front bedroom, and then cycle through my small collection on a weekly or bi-weekly basis, returning the previous radio to storage to await its turn in a month’s time.

Since newer houses and gardens are typically quite small in the UK, I’ve always been thinking in terms of radio on safari, so with the weather starting to improve, I present to you my ‘shack’ consisting of a recently acquired IC-7100 inside a fortuitously sized toolbox. The radio runs in the bedroom like this too, usually connected to a Wellbrook loop when not transmitting.

20160312_121757332_iOS (1)

The picture [above is of the] head unit in stowed configuration, as the lid of the box doesn’t quite clear the unit when sitting on the base. The space on top of the radio is then filled by the SOTA Beams antenna bag and other sundries. The battery travels separately in the backpack.

My plan was to never have to connect/disconnect the ethernet style cable between the two halves, looks like the plan worked !

You can see it in action here:

This is a brilliant kit, Mark–a great way to escape urban radio interference! The Icom IC-7100 is uniquely qualified for the deep case, too, since the control head can sit on top of the body while in use. The angle of operation is also ideal. Very cool–thanks for sharing!

Spread the radio love

Scott’s Elecraft KX3 Go-Box

Many thanks to Scott (AK5SD) who shares the following photos and bill of materials for his custom Elecraft KX3 go-box:


IMG_0531 IMG_0534

IMG_0532 IMG_0535 IMG_0537 IMG_0536

Bill of materials

The panel was custom laser cut by Front Panel Express. I have the CAD
file and I’m willing to share it with anyone who wants to reproduce my effort.

Amazon.com
Case B&W Type 1000 Outdoor Case with SI Foam
You won’t use the foam, so you can buy the version without it if you can find it cheaper.

Battery Anker Astro Pro2 20000mAh Multi-Voltage (5V 12V 16V 19V)
Portable Charger External Battery Power Bank
Avoid look alike batteries and the next generation model from Anker. The newer Anker
battery is only capable of delivering 1.5A from the 12V supply. Two look alike batteries
I tried did not have the auto-off feature that the Anker does.

Vetco.net
ACC2 and I/Q Jacks 2 x 2.5mm Stereo Jack Panel Mount (PH-666J-B)
Phone, Key, and ACC1 3 x 3.5mm Stereo Jack Panel Mount (High Quality) (PH-504KB)
Mic Jack 1 x 3.5mm 4 Conductor Jack Panel Mount (PH-70-088B)
12V IN and CHG IN 2 x 2.1mm DC Power Panel Mount Jack (PH-2112)
12V OUT 1 x 2.5mm DC Power Panel Mount Jack (PH-2512)

You also need plugs and wire for interconnects. I bought some 2.5mm (CES-11-5502)
and 3.5mm (PH-44-468 for stereo, PH-44-470 for 4-conductor) audio cables with right
angle plugs and just cut them to use for the signal lines going to the KX3. I did the same
thing for the 2.5mm (PH-TC250) and 2.1mm (PH-TC210) power cables. A couple of
caveats are in order. The Phone, Key, and ACC1 interconnects require low profile
right angle connectors. The cables I listed above won’t work. Vetco part number
VUPN10338 will work. The power cables I’ve listed above use 24 gauge wire. This
is a little light, but the runs are small so I think it is OK. You can use higher gauge
cables if you can find a source.

USBfirewire.com
USB OUT USB 2.0 Right Angle Extension Cable (RR-AAR04P-20G)

Digikey.com
L Brackets 8 x Bracket Rt Ang Mount 4-40 Steel (612K-ND)
These L brackets are used to mount the KX3 to the panel and the panel to the case.
For mounting the KX3, I use a little piece of stick on felt on the bracket to protect the
KX3’s cabinet from damage. Replace the KX3’s screws with #4-40 Thread Size, 1/4”
Length Steel Pan Head Machine Screw, Black Oxide Finish (see below). For the panel
mounting, use #6-32 Thread Size, 3/16” Length self tapping sheet metal screw. You
may need to cut the tip off in order to not puncture the outside of the case.

RG316 BNC Male Angle to BNC Female SM Bulkhead Coaxial RF Pigtail Cable (6”)
This is not the original interconnect I used for connecting the KX3’s antenna output to
the panel. However, I think it is a better option for new designs. The caveat is that you
will need to verify the hole in the panel matches the bulkhead connector on this cable.
There will be a little loop in the cable when you are done, but that is fine.

Micrfasteners.com
Screws for Sound Card 2 x FMSP2510 – M 2.5 x .45 x 10mm
Screws for KX3 Bracket Mount 4 x MSPPK0404 – 4-40 x 1/4
Screws for Countersunk Panel Holes 8 x FMPPK0403 – 4-40 x 3/16
Screws for USB Connector *** 2 x FMPPK0406 – 4-40 x 3/8

I’m pretty sure these are the right length for the USB connector. I am doing it from memory.

Amazon.com or eBay.com
Soundmatters foxL DASH A Wireless Bluetooth Soundbar (OPTIONAL)

Sonoma Wire Works GJ2USB GuitarJack 2 USB Portable Audio Interface (OPTIONAL)
(Make sure you get the USB model, not the 30-pin model.)

This is optional if you want a built-in sound card interface for a waterfall display using iSDR. Make sure to eliminate the holes in the upper left corner of the panel if you are not installing. You will also need 2.5mm x 10mm screws to mount this to the bottom of the panel (see below).

bhi Compact In-Line Noise Eliminating Module (OPTIONAL)

In my opinion, the KX3’s noise reduction is totally ineffective for SSB communications. This external noise reducing DSP is one solution, albeit an expensive one, to that problem. It is only for SSB, not CW or digital modes. It is also available from GAP Antenna Products.

IMG_0530


Scott: you have done a beautiful job here and have spared no expense to make a wonderfully-engineered and rugged go-box. No doubt, you’re ready to take your KX3 to the field and enjoy world-class performance on a moment’s notice. 

Though I’ve never used them personally, I’ve noticed others who have taken advantage of the Front Panel Express engraving service–certainly makes for a polished and professional front panel.

Again, many thanks for not only sharing your photos, but also your bill of materials which will make it much easier for others to draw inspiration from your design!

AK5SD_QSL_Card

Speaking of designs, when I looked up Scott on QRZ.com, I noticed that he also sports a QSL card (above) designed by my good friend, Jeff Murray (K1NSS). Obviously, Scott is a man with good taste!

Spread the radio love