Tag Archives: Shortwave Radio Reviews

Mehmet Burk reviews the Kaito KA550 self-powered radio

kaito-ka550

Many thanks to Mehmet Burk of ReliefAnalysis.com for sharing his most positive review of the Kaito KA550 self-powered shortwave radio.

[Note: I’ve updated this post to link to the Kaito KA550. I initially linked to the older KA500 by mistake. Apologies!]

Click here to read his full review:
http://www.reliefanalysis.com/2014/03/review-katio-ka550-terrific.html

The Kaito KA550 currently retails for about $59.00 US shipped.

Spread the radio love

Frank’s maritime radio suggestions

In response to my previous post, The Best Shortwave Receiver for Your Boat or Yacht, Frank (VK3JFH/VP8DNM) writes:

“I have all three of the portables mentioned, the Sony SW7600GR, the Sangean 909X, and the Tecsun PL-660. The latter is currently my portable of choice. Having just read this post re radios afloat I took the time to suck down a fax from Charleville, Queensland.

(Click to enlarge)

Frank’s Tecsun PL-660 and Macbook Pro decoding a weather fax with Cocoa Modem 2.0 (Click to enlarge)

Results shown..

This was with the Tecsun 660 attached directly to a (near) horizontal longwire at my home QTH, inserted directly into a Macbook Pro running CocoaModem 2.0 via the headphone socket on the Tecsun.
I have had similar results with the Sony and the Sangean

To all intents the result is as good as with my other radios ( K5000 etc.).

(Click to enlarge)

Screenshot of the weather fax image (Click to enlarge)

However if I was starting from scratch afloat I would get an Icom IC-718. Only $689.95 from Universal Radio. You may choose to simply use it as a receiver or as a Ham TX/RX. However it can also be ‘opened up’ with a simple diode snip to transmit on all the marine bands. Not strictly legal [nor is the IC-718 designed for those bands] but there are a lot of ‘opened’ 718s out there and in an emergency you can transmit a mayday on anything…. even a couple of jam tins and string although you may need a fair old length of string….

If you wish to transmit on your IC-718 you will need a tuner. I have an LDG IT-100 on mine.

Hooking up a consumer receiver to a marine antenna….? Simply make up a pigtail with a 3.5mm jack at one end and a BNC or SO -259 at the other.

Non-marine radios afloat…. ? I had an IC-735 aboard from Cyprus (1992) until Patagonia (2007). Since 2007 I have had an IC-706Mk2G afloat…. no problem with either one.”

Many thanks for your input, Frank!

Spread the radio love

The best shortwave receiver for your boat or yacht

[Updated: October, 23 2017]

SWLing Post reader, Bob, recently emailed the following question:

Yacht“My wife and I live on a boat and plan to go to the Bahamas this season. We cannot afford to install a SSB radio – costs $7K to $8K. But we need to be able to hear the weather reports and forecasts

So we are thinking of just getting a SW radio receiver.

A friend has purchased a Grundig satellite 750 but it does not seem to have the range, and he has not been successful connecting an antenna.

I think I need a SW radio I can connect to an antenna. I am thinking of a CommRadio CR-1 ?

What do you think?”

Thanks for your question, Bob.  I’m going to give you a few suggestions, then open this one up to your fellow SWLing Post readers, as I suspect there may be some with experience setting up and using an HF receiver on the water.

ImportantAs Bryan commented, just after I posted this review, readers should note that none of the receivers/transceivers I offer here are designed for maritime use, thus they lack features like GMDSS, DSC and DGPS and have no extra protection from the corrosion of salt water on their circuit boards.

Receivers

The CommRadio CR-1

The CommRadio CR-1

For my part, as an inlander, I think you’re on the right track with the CommRadio CR-1 or CR-1a.  Not only will it cover the entire HF spectrum (for HF weather fax, RTTY and many ship-to-shore communications), but it also covers VHF (64 – 260 MHz) and UHF (437 – 512 MHz) frequencies. The CR-1 is also a very stable receiver and covers all of the modes you’ll need (upper side-band, lower side-band, AM and FM).

If you’re space conscious, fortunately the CR-1 has a very small footprint; you could mount it nearly anywhere. The CR-1 also has a built-in battery pack and can run/charge on an array of DC voltages (6-18 VDC).

You may also wish to consider the Alinco DX-R8T (see our review) or the Icom R-75. The Alinco has a detachable face plate, thus may also be easily accommodated. The Icom R-75 is a great receiver for your application, as well, but is larger than the CR-1 and does not have a detachable face plate option.

Again, I think you’re on the right track with the CommRadio CR-1.

Another option to consider…general coverage ham transceiver

The Kenwood TS-480SAT is full-featured, small, and has a detachable face plate.

The Kenwood TS-480SAT is full-featured, small, and has a detachable face plate.

Here my advice is going to sound a bit like that which I gave reader Phil recently: I would strongly urge you to get your amateur radio license.

It’s a simple process–even elementary kids do it–and the license no longer requires a knowledge of Morse code (CW), (although I am a devotee of code and would suggest pursuing a knowledge of this at a future date).

Moreover, the testing material will make for an excellent primer on radio communications, so if something goes wrong in the middle of the ocean, you’ll be better prepared to diagnose and fix it.

The Yaesu FT-857D

The Yaesu FT-857D

Additionally, in case of an emergency, a ham radio transceiver would provide yet another means of calling SOS to a community that is well-versed in handling emergency communications.

Check out this previous post for suggestions on getting your amateur radio license.

Ham radio transceivers also offer excellent stability and the modes you’ll need to decode any voice or digital mode.

Keeping in mind that you’ll need a transceiver 1) in the same price range as the CR-1, 2) that is compact or has a detachable face plate, 3) has a general coverage receiver, and 4) is rated for 100 watts of output power, I would suggest the following:

The Linco DX-SR8T

The Alinco DX-SR8T

  • The Alinco DX-SR8T. While not a small radio, this rig has a detachable face plate (with optional extension cord), a sensitive receiver and is a great value at $520 new. I favorably reviewed the receiver-only version of this radio two years ago. I’ve heard that the receiver in the DX-R8T is identical to the one in the DX-SR8T. I would purchase this from Universal Radio or Ham Radio Outlet.
  • The Elecraft KX2

    The Elecraft KX3 or Elecraft KX2 are two of my favorite general coverage transceivers–I own both. They can both be powered from a modest 12 VDC source and/or internal batteries. Both are limited to QRP (12 or 15W) transmit power, but an external portable 100W amp can be added. Both are exceptional radios in terms of performance.

  • The Kenwood TS-480SAT. Also worth considering, this transceiver has an excellent receiver with better filters and a smaller footprint than the Alinco DX-SR8T. Though it costs nearly twice as much as the Alinco, it’s on sale until 11/30/13 for $974 from Universal Radio.
  • The Yaesu FT-857D.  This is probably the most compact among the transceiver options listed above. The FT-857D has been on the market for many years and has proven itself a capable mobile transceiver. The detachable face plate could easily be mounted anywhere you wish. The Yaesu FT-857D can be purchased at Universal radio or Ham Radio Outlet.
  • The Icom IC-7000 is an excellent choice for maritime operation. It's possible to find a used one at a good value.

    The Icom IC-7000 is an excellent choice for maritime operation. It’s possible to find a used one at a good value.

    Also consider buying a good-quality used general coverage transceiver from a reputable retailer like Universal Radio, Ham Radio Outlet, The Ham Station or Amateur Electronic Supply. Search for the three models listed above, but I would also consider the Icom IC-706MKII and the Icom IC-7000.

Of course, you will need a good HF antenna for any of these options to work, even the CommRadio CR-1; a radio, after all, is only as good as its antenna.  The type of antenna you can use will be limited by your ability to mount it on on your boat: some are limited-space wire antennas, others are whip antennas.  Make sure the antenna will resonate on the frequencies important for your maritime travels.

Fortunately, most of the retailers listed above have experience in this capacity.

Portables

If I were on a boat, I would also carry a portable shortwave radio as a backup. Some to consider are the Tecsun PL-660, Tecsun PL-880Sony ICF-SW7600GR or the Sangean 909X. All of these have SSB mode and good sensitivity, selectivity and stability, although the Sangean ATS-909X requires an external antenna for optimal sensitivity.

There are also a few compact travel radios worth considering as well, although sensitivity generally isn’t as good as the larger, full-featured portables mentioned above. I would consider the CountyComm GP-SSB, Digitech AR-1780, or the C. Crane CC Skywave SSB as a nice spare radio to tuck away on board.

Hope this helps, Bob!  Happy sailing!

SWLing Post readers: if you have experience in maritime HF operation, we welcome your comments and suggestions…

Update: Check out Frank’s maritime radio suggestions.

Spread the radio love

On sale now: the CommRadio CR-1, a great little receiver

IMG_8048

[UPDATE: Check out our full review of the CR-1 by clicking here.]

A hot tip:  currently, CommRadio offers the CR-1 software-defined tabletop receiver for just $500 (US), until August 1, 2013. Check out the sale on CommRadio’s website and at Universal Radio.

I have been using the CommRadio CR-1 for almost two months now. I had planned to provide a brief review for The SWLing Post by early July, but my travel schedule has simply been too hectic.

MTcover0813coverlgFortunately, however, I offer a full in-depth review in the August 2013 issue of Monitoring Times magazine (incidentally, their turn-around time from submission to print is simply amazing). If you subscribe to MT–or can get your hands on a copy–you will have my full review.

Many of you have been asking me for my thoughts on the CR-1 so you will know whether or not to take advantage of promotional pricing.

In a nutshell, here is the answer your question:

Q: Is the CommRadio CR-1 a good deal?

A: Yes!

Though I was skeptical about this little receiver when I first saw the announcement in January, the CR-1 truly does hold its own. It’s a sturdy radio built with longevity and performance in mind. It’s the little touches I love: a near-perfect tuning knob (in my opinion), size & portability, multiple antenna jacks, an excellent internal battery and gold-plated circuit board pads…Performance-wise, the CR-1 has great sensitivity and selectivity on the HF bands…

Though there are a few negatives, in my book, the positives far outweigh them. If you really want to dig into the juicy details, I would encourage you to check out my full review in the August 2013 issue of Monitoring Times magazine (especially since MT, sadly, is slated to stop publishing at the end of the year).

If you’ve been on the fence about buying the CR-1, I would encourage you to give it consideration before August 1st, 2013, when the price increases to $599 US.

Here is the press release from CommRadio regarding the current $500 sale:

(Source: CommRadio)

CR-1 News for Friday, July 26th, 2013

Our Promotional Price of $500 will increase on August 1st.

All orders made after July 31st will be priced at $599 (battery included).

Order now before the price goes up.
www.commradio.com

Please note we are working hard to get all radios out as soon as possible, although the lead time could be up to 4 – 5 weeks starting this week (7/24/2013)

For any questions about ordering and shipping

or international orders please contact

Lizz Arias

[email protected]

Spread the radio love

Review of the Elecraft KX3: world-class transceiver, superb shortwave receiver

I originally wrote this review for Monitoring Times Magazine, May 2013 issue (pages 56-57). The review that follows has been expanded and includes updates.

The Elecraft KX3 Transceiver (Click to enlarge)

The Elecraft KX3 Transceiver (Click to enlarge)

You may have noticed that in the past few years, while more and more software defined radios (SDRs) are appearing on the market, fewer and fewer traditional tabletop shortwave receivers are being introduced. Most of the receivers in production, meanwhile, are quite mature, having been in production for years. For those of us who still have an appreciation for the traditional front panel, tuning knob, and portability of an all-in-one tabletop receiver, perhaps we should look to the active ham radio transceiver market.

Introducing the Elecraft KX3

Besides being an avid SWLer (ShortWave Listener, for the newbies out there), I’m also a ham radio operator (callsign: K4SWL). But if you’re not a ham, you may not be familiar with the innovative, US-based radio designer and manufacturer, Elecraft. First of all, note that “US-based” adjective: this is an increasingly rare phenomenon in the world of radio production, and it deserves a word of praise up front. Elecraft started life as a kit manufacturer, focusing on QRP ham-band-only radio transceivers that were effective, affordable, and maintained a very high level of performance. Their K1, KX1 and K2 transceivers are legendary, and I’ve had the good fortune to own them all at some point along the way. Their K3, introduced in 2008, became a benchmark transceiver and still tops the charts in performance; it’s truly a choice DXpeditioner’s radio.

In 2011, Elecraft introduced the KX3–a portable SDR transceiver with a full-featured knob-and-button user interface that doesn’t require connection to a computer to operate. At the Dayton Hamvention, the KX3 instantly drew crowds, as it was unlike any other transceiver on the market. I was there, and like others in the crowds around the Elecraft booth, I was eager to try out this full-featured transceiver, especially upon learning that even the basic, no-options model has a general coverage receiver. A ham transceiver with “general coverage,” incidentally, means that its receiver is not limited to the ham bands only; these receivers typically receive between 100 kHz and 30 MHz (i.e., the full shortwave radio spectrum). That morning at the Hamvention, I quickly made my way to one of Elecraft’s owners, Wayne Burdick, to ask him,“Would the KX3 make for a good shortwave radio receiver?” Wayne’s prompt response: “Yes.”

That was enough for me: more than ever, I simply couldn’t wait to get within reach of a KX3. Why? I love to travel and take radio along, but I’ve always had to haul separate transceivers and receivers for my separate-but-related hobbies: 1) ham radio and 2) SWLing. Perhaps the KX3 would suit both purposes? I was hopeful. If this was true, with a KX3, I could have a full-featured QRP transceiver and a shortwave receiver in one…and a portable one at that. Ideal!

I just had to get my hands on one to find out.

(Click to enlarge)

(Click to enlarge)

A closer look

Though the KX3 was introduced in the summer of 2011, it didn’t start shipping until a few months later, and there was a backlog of orders for it. Fortunately, my good buddy, Dave Anderson (K4SV), was among the first purchasers of the KX3, and he was generous enough (and trusted me enough!) to let me borrow it.

At first glance, the KX3 resembles just the faceplate of a tabletop radio: it has a large tuning knob, wide, clear amber backlit display, and a traditional set of function buttons and multi-function knobs…but not much else. Or so it appears, as there’s no bulky chassis. Connections for microphones, DC power, headphones, IQ out, key and PC interface are located on the left side panel of the radio, while the RF connection (a female BNC) is on the right side panel. The KX3 has built-in folding feet, quite sturdy, that allow the radio to be tilted at a comfortable angle for tabletop operation.

To best evaluate the KX3, I’ll first discuss some of the features that would interest a ham radio operator, then focus on those best suited to the SWLer.

There is a hidden keypad for direct frequency entry (notice the numbers printed next to the multi-function knobs and buttons?)

There is a hidden keypad for direct frequency entry (notice the numbers printed next to the multi-function knobs and buttons?)

Everything for the Ham

If you’re a ham, you’ll love the feature set on the KX3. It must be one of the most comprehensive set on any radio I’ve ever used. At a bare-bones level, meaning without adding any options, the basic KX3 is truly an all-in-one QRP transceiver.

Of course, it will function on any mode: USB, LSB, CW, data, AM and FM. The output power is adjustable from 0 to 10 Watts. You can easily adjust the DSP filters, AF, RF, passband, and notch all from dedicated buttons and knobs. It even has a memory keyers for both CW and voice.

You say you prefer digital modes? Not only will the KX3 natively decode RTTY and PSK31 and display the scrolling text on the display, but you can also send RTTY and PSK31 without a PC. How? Simply set the appropriate data mode and use your key to tap out your message in CW. Though you will hear the CW side tone, the KX3 will transform your code into RTTY or PSK-31, and send. Hypothetically, armed with only a KX3, you could run a RTTY contest from the field with no computer. Remarkable.

The variable DSP filtering is most impressive and the KX3’s ability to block adjacent signals is benchmarked. Indeed, if you look at Sherwood Engineering’s receiver test data rankings (http://www.sherweng.com/table.html), which are sorted by third-order dynamic range (narrow spacing), the KX3 is second only to the Hilberling PT-8000A, an $18,000 transceiver.

With the installation of the $170 optional internal automatic antenna tuner (the KXAT3), you will be able to tune most any wire antenna on the go, with no need to carry an external ATU.

In short, for the ham, the KX3 offers a cornucopia of features, too numerous to list here; but I can at least tell you that I discover something new on this radio almost every day and continue to be amazed by the features on this transceiver, especially considering that it costs only $1000 ($900 in no-solder modular kit form).

The Elecraft KX3 is built for travel and portability--here we compare its size with the Grundig G3

The Elecraft KX3 is built for travel and portability–here we compare its size with the Grundig G3

For the SWLer

We’ve talked about the KX3 as a ham radio transceiver, but how does it stack up if your primary interest is to just sit back and listen to broadcasts? Short answer: Very, very well.

The KX3 is loaded with features that would please even the most discriminating DXer.

First, on the faceplate, the KX3 has a multi-function knob that controls both the AF and RF gains. It’s very simple to use, even though I’m not a fan of switching between the AF/RF gain controls on the same knob. AF gain is what most of us refer to as a volume control and many dedicated shortwave receivers lack an RF gain control even though it’s a vital tool for broadcast listening in noisy conditions. By default, the KX3 RF gain is set to zero; turning the RF pot counter-clockwise will decrease RF gain.

Grundig G3 (left), Elecraft KX3 (right)

Grundig G3 (left), Elecraft KX3 (right)

The KX3 also has three different preamp settings, which are useful for amplifying weak stations, as well as an attenuator for local or strong broadcasters. The KX3 has passband and notch filtering, and an auto-notch function that effectively deals with heterodynes from nearby carriers. The KX3 also has DSP noise-reduction (NR) for noisy band conditions (or to help a signal “pop” out from the noise) and noise blanking (NB) for local RFI.

Many automatic gain control (AGC) parameters are adjustable, too, so they can be tweaked for AM fading and weak-signal DXing. The fact is, the KX3 has more built-in receiver controls than the dedicated tabletop shortwave receivers I’ve owned.

Audio

Left side panel of the Elecraft KX3 (click to enlarge)

Left side panel of the Elecraft KX3 (click to enlarge)

To be clear, however, there is one negative in the architecture of the KX3 when viewed through the eyes of an SWLer. The KX3 is designed around the amateur radio operator and AM bandwidth is narrower than you will find on most dedicated tabletop shortwave receivers–indeed, a commonality on any general coverage ham transceiver. The KX3’s AM bandwidth can only be widened to 4.2 kHz–a figure that almost made me dismiss this radio’s SWLing abilities out of hand. I’m glad I didn’t let that spec stop me, though: I had read many a favorable comment from KX3 owners who used the radio to listen to the broadcast bands. Their comments on the audio were very positive, and for good reason.

What the KX3 lacks in wide bandwidth is made up for by the 32-bit floating point DSP architecture. I’m not sure how, but the KX3’s audio fidelity “sounds” much wider than 4.2 kHz. Indeed, I still have a difficult time believing that the filter is not closer to 7-8 kHz in width. When using headphones or amplified speakers, the bass response rivals some of my tube receivers. There are even adjustable 8-band equalizer settings for audio to improve this even further.

In addition, Elecraft has unique audio effects available in the audio effects menu. One I’ve found very valuable in broadcast listening is called “delay,” a stereo simulation effect that broadens the mono sound in such a way that the audio sounds even richer.

Memories, scanning and tuning

The KX3 has 100 general-purpose VFO A/B memories with optional alpha numeric labels. It also supports channel-hopping or scanning within any number of labeled memory groups. Auto scan is simple and works in both muted and (my favorite) non-muted, or continuous, modes.

The KX3 can also use the “K3 Memory” application from Elecraft’s K3 transceiver, which allows for longer labels and the instant selection of desired memories from a PC. The “K3 memory” application is a free software download on Elecraft’s website.

The tuning knob on the KX3 is substantial and of good quality. It’s only slightly smaller than the tuning knob on my Alinco DX-R8T, so it’s a substantial knob, which is helpful to big (or buttery) fingers. The drag can be easily adjusted with a supplied hex wrench. The tuning rate can be adjusted to .5 kHz increments, allowing you to quickly tune through the band. The small multi-function knob next to the main tuning knob can also be set for a 1 kHz rate.

At first glance, you might not realize that the KX3 has a direct frequency-entry keypad. Check out the photo, however [MAKE REFERENCE TO POSITION ON PAGE]. The buttons and multi-function knobs in the lower left quadrant of the KX3 double as number pad, decimal point, and an “enter” button for a keypad. I thought this a bit odd at first, but now find I use this all the time.

Installing the optional ATU is very simple and requires no special tools or soldering

Installing the optional ATU is very simple and requires no special tools or soldering

Optional ATU: Worth the Cost

As I mentioned earlier, the optional automatic antenna tuner, the KXAT3, makes a lot of sense for the ham who operates portable. If you are a licensed amateur radio operator, the ATU can be a powerful tool for matching random length, or multi-band antennas to your desired broadcast band by tuning to a nearby ham band frequency. The L and C parameters of the tuner can be manually adjusted to optimize without transmitting. The user can select one of 8 L’s or one of 8 C’s parameters in the ATU MD menu entry. When an L is selected, C is set to 0, and vice-versa. However, it is not presently possible to select combinations of L and C to achieve a closer resonance. Still, selecting an L or C value in this way will provide a useful increase in gain.

In addition, if you like medium wave (MW) DXing, the ATU comes with MW (AM broadcast band) filtering that tracks the VFO, somewhat improving image rejection between 300-1,000 kHz. I have tested the KX3 on medium wave both with and without the ATU installed and find that it certainly improves rejection.

To be clear though, sensitivity decreases as you tune below 1,500 kHz. Elecraft informed me that it was necessary because the KX3 uses PIN diodes in its T/R switch, and the signal must be high-pass filtered to avoid IP2 problems with the diodes. When you tune through the 300-1200 kHz range (or so) you will certainly notice the loss of sensitivity. Elecraft also noted that selectivity in the AM broadcast band was not a major design criteria, so in this band the 160 meter low pass filter is used. This is not ideal from a harmonic rejection standpoint, and there will be some 3rd and 5th-harmonic images from strong stations. Adding the ATU helps with this. However, adding the ATU doesn’t generally improve sensitivity in this range.

The ATU is very easy to install–almost “plug and play” (see photo).

Oh, yes–and it’s an SDR, too!

As if the KX3 didn’t do just about everything, it also has a quadrature down-sampling mixer compatible with PC-based SDR (software-defined radio) applications. This means, via a shielded stereo audio patch cable and a supplied USB control cable, you can connect the KX3 to your PC and use a freeware SDR application like HDSDR to turn your KX3 into a proper software-defined receiver.

SDR functionality is limited to receiver functionality, and depending on the bandwidth and sampling rate, will be dependent on the quality of your sound card. The true benefit is the ability to see a wide–48 kHz or more–chunk of spectrum.

Summary

Every radio has its pros and cons. When I begin a review of a radio, I take notes from the very beginning so that I don’t forget some of my initial impressions. Here is the list I formed over the time I’ve spent evaluating the KX3. Note that I created this list with the shortwave listener in mind, not necessarily the ham radio operator.

I even had some success SWLing using an inexpensive whip antenna (attached via BNC).

I even had some success SWLing using an inexpensive whip antenna (attached via BNC).

Pros:

  • World class, benchmarked receiver performance powered by high-performance 32-bit floating-point DSP
  • Rich, full audio fidelity on AM despite limited bandwidth (see con)
  • AF and effective RF gain controls
  • Adjustable filters (no optional roofing filters needed for SWLing)
  • Superb sensitivity and selectivity; outperforming even my WinRadio Excalibur with weak signal DXing
  • Very low noise floor
  • Auto-notch, which helps eliminate annoying heterodynes, even in AM
  • Internal ATU option brings improved MW image rejection (see MW con) and hams have the ability to tune a random length antenna
  • Natively decode (170 Hz) 60-WPM RTTY and display it right on the KX3’s VFO B display, which is alphanumeric
  • Battery operation via 8 AA batteries
  • Lightweight
  • Dedicated headphone jack
  • For non-ham radio operators, the transceiver can be disabled and re-activated once you have a license with a simple hardware adjustment. No need to fear accidental transmission
  • For hams, or those who plan to become one, the KX3 is a QRP transceiver in the top of its class

Cons:

  • AM bandwidth limited to 4.2 kHz (see pro)
  • Hand mic connector is the less standard 3.5 mm audio plug
  • Built-in speaker is small with limited volume and fidelity–only intended as a back-up when headphones or external powered speakers are unavailable
  • AA batteries fit a bit tightly in internal holder and can present a challenge to remove
  • Medium wave reception is mediocre at best, but with the optional ATU, is improved though slightly better image rejection (see ATU pro)
  • Very slight audio whine (similar to a faint heterodyne sound) heard in some zero beat AM stations; may be fixed in future firmware update
  • No AM sync detector (AMS)

Did I buy one? Confession time

I must admit, I was appreciating my buddy Dave’s KX3 very much. Maybe too much…

I have three hobbies: shortwave radio listening, ham radio, and traveling. After using the KX3 for a few hours, I knew it would be my perfect companion. Not only is it a top-notch amateur radio transceiver, its also an excellent shortwave radio receiver. It’s portable, but also makes an excellent tabletop radio. It’s an all-in-one radio, but can also double as an SDR when connected to a PC.

So, is the KX3’s broadcast audio fidelity as good as a purpose-built broadcast receiver like the legendary Drake R8B? Not quite. But I would argue that its ability to receive weak signals would give even a Drake a run for its money. I have to admit, the KX3 receiver outperforms my Alinco DX-R8T in every respect. Even though the AM bandwidth is limited to 4.2 kHz, I think the audio also sounds better than my Alinco and any of my portable radios with wider bandwidth.

The Elecraft KX3 Transceiver (Click to enlarge)

My Elecraft KX3 Transceiver (Click to enlarge)

Needless to say, I bought one. It was only fair to Dave, who needed to discover for himself what his loaned-out rig could do.

The KX3 is a game changer for me. Though I’ve always carried portable transceivers in my travels, I’ve also had to carry a separate tabletop receiver and an SDR or portable radio for my SWLing. No more. Moreover, I like the broadcast audio on the KX3 well enough to record and archive shortwave broadcasts, which I frequently do for my blog, The SWLing Post and The Shortwave Radio Audio Archive. In my shack, I’m even considering purchasing Elecraft’s 100 watt amplifier and doing away with my 100 watt tabletop transceiver.

As for support? No worries there. I’ve been an Elecraft customer for years and I can tell you that they believe in and stand behind their products. I purchased with confidence.

I encourage you to try on the KX3 as well. It may very well be all the radio you’ll ever need.

Spread the radio love

A review of the Lowe SRX 100

The Lowe SRX 100 shortwave receiver (Click to enlarge)

The Lowe SRX 100 shortwave receiver (Click to enlarge)

I recently had the opportunity to spend some quality time with the Lowe SRX 100 (a.k.a., Target HF3, AKG HF-3, and Garex HF-3), a receiver produced in the UK around 1995-96. It’s not know for being a DXing machine, but virtually any Lowe product has a certain nostalgia factor, not to mention, collectability factor. As you can see in the photo on the right, the SR 100 is a very simple receiver, and as such, it’s just the type for which I have a personal affinity.

The antenna connection and attenuation switch on back panel of radio. (Click to enlarge)

The antenna connection and attenuation switch on back panel of radio. (Click to enlarge)

When I first brought the SRX 100 home and hooked it up, I used the supplied 10 meter antenna wire that Lowe shipped with all of these units when new. The antenna wire has the correct fitting for the antenna connector on the receiver:  an RCA type connector, instead of the more common SO-239 or BNC.  A bit strange. But nonetheless, I hooked it up, plugged in the supplied AC adaptor, and turned on the radio…to find I received nothing but loud static. I live in a fairly RFI-free house and area, but the supplied antenna was so good at receiving noise that I thought the receiver was “deaf” and broken. I decided to give it another chance:  I took the SRX 100 into my radio room and hooked it to my large, external horizontal loop antenna; lo and behold, it came to life!  Needless to say, it was a relief.  (I later learned that many others have experienced this symptom with the supplied antenna.)

(Click to enlarge)

(Click to enlarge)

Basics

The SRX 100 receiver coverage is from 30 kHz to 30 MHz, in one-kHz steps. The receiver is a dual-conversion design with the first intermediate frequency at 45 MHz, and the second at 455 kHz. During the past two months of use, I have noticed no serious overloading.

The bandwidth, however, is fixed in AM and SSB–there are none of the wide and narrow settings we’re used to seeing on modern portables, let alone tabletops. I found, though, that for broadcast listening, the AM filter is near ideal so long as no adjacent signals are present. In crowded conditions, you can tune off-frequency to decrease interference unless your desired signal is sandwiched between two others.

The sound quality is a major plus. My unit reminds me very much of the mellow sound I got out of my Palstar R30C; it has almost a tube-like quality.  And in my book, that’s a huge compliment.

Tuning around

photo_4As simple as the Lowe SRX 100 is, tuning it can take practice. First off, the tuning knob is substantial, with a weighted feel–it spins freely and hints of quality workings within.  The actual tuning encoder, moreover, is quite clever.  I thought it odd that this radio had no band switching–to permit moving from meter band to meter band, or even in 1 MHz increments–instead, it is adaptive, something I hardly recall in a receiver from this era. If you tune the SRX 100 slowly, you will move in 1 kHz increments; speed up, and you can skip in steps of 10, 100 or 1,000 kHz steps. So, if I wanted to move from the tropic lower bands up to 11 meters, one really quick spin will get me there in a second. While this seems intuitive, in practice, any jerky movement of the tuning knob will shoot you right past the desired frequency into the hinterlands.

Also, 1 kHz increments in single side band can seem like a large tuning step on a modern tabletop radio.  The SRX 100 gets around this with its “Clarify” knob, which allows for fine tuning. The LDC display, though, does not reflect any incremental changes with the clarify knob.

Back panel of the Lowe SRX 100 and RCA to BNC adapter (Click to enlarge)

Back panel of the Lowe SRX 100 and RCA to BNC adapter (Click to enlarge)

Sensitivity-wise, the Lowe SRX 100 is quite respectable in the lower bands, but above 15 MHz or so, started to drop off a bit. Selectivity-wise, you will have no contest grade receiver here. For most broadcast listening, it does quite well, even on medium wave.  But on SSB, it’s simply disappointing in crowded conditions. Forget CW listening unless your “internal filter ” (your brain/ears combo) can cope with multiple signals at once.

Every receiver has pros and cons; I started noting them from when I first tuned on the radio:

Pros:

  • Simple design–even grandpa can figure out these controls without cracking open the manual
  • Nice weighted tuning knob
  • Easy to read LCD display (see con)
  • Tuning rate is adaptive to spin rate of tuning knob
  • Pleasant, mellow audio from its built-in speaker, reminiscent of the Palstar R30 series
  • Compact size for a tabletop receiver
  • 12 VDC power supply and current are only at 300 mah
  • Sturdy metal chassis and build quality excellent
  • Attenuator switch (Con: on back of unit)
  • Even at time of production, this was a relatively inexpensive tabletop with reasonable performance for price

Cons:

  • No adjustable bandwidth
    • SSB bandwidth too wide for listening to CW if any adjacent signals are present
    • AM too wide if competing station within 5 kHz of either side of desired carrier
  • No back lighting on display (see pro)
  • Clarifier only marginally effective on SSB signals
  • Only 10 memory positions
  • Adaptive tuning rate takes practice to become fast and accurate (see pro)
  • Non-standard RCA type antenna connector (will require an adapter for most people)
  • Supplied 10 meter length of antenna wire with RCA plug is useless in most environments
  • No bail

photoSRX100FrontPanelSummary

This is a fun little radio!  Even thought it’s a tad quirky, it may just be the best shortwave radio for an armchair shortwave radio listener, someone who wants an uber-simple design and small footprint. If you find used one on eBay, or with a company like Universal Radio, it may make a nice working addition to any shortwave radio collection.

Spread the radio love

A review of the Degen DE1129 portable shortwave radio

My Degen DE1129 as tested (Click to enlarge)

The Degen DE1129 is the latest compact, full-featured, DSP-based, AM/FM shortwave radio from Chinese manufacturer, Degen.  It’s available from TecsunRadio.com at $100 US, shipped. I received my sample radio last week, and published my initial impressionsof the unit. Since then, I’ve had time to put this tiny radio through its paces and learn the functions of the various buttons labeled in Chinese, which I don’t read. In the following review, we’ll study the positive characteristics–and the drawbacks–of this little radio.

Getting started:  the unit

I’ll begin by discussing some of the positive attributes of this radio. First, it should be noted that the DE1129 I have reviewed is one of the first to be produced, and as such, it currently has 18 buttons screen-printed in Chinese. Last week, Degen announced that they will be producing an English version, and (importantly) adding a number pad for keying in frequencies directly (see photo above). I have confirmed this via the manufacturer’s retailer. It will require squeezing a lot of buttons into a very small area, but I imagine this alteration will be easy enough, and probably remain functional even for those with larger fingers.

Degen has confirmed that they intend to produce a DE1129 with a number pad and English print in the future (Click to enlarge, Photo: Degen)

On the topic of buttons, those on the DE1129 are easy to push and have a very tactile response–very much like those on the Tecsun PL-380 and PL-390. I don’t expect these buttons are likely to be compressed accidentally if the radio is in your pocket, but just in case, there is a number lock button (with a key icon) that will further protect the radio.

The body of the radio is made of a hard, smooth plastic–without a rubberized coating–and seems durable enough. The speaker is not exactly flush-mounted. Instead, it protrudes from the rest of the body by about 1/4  inch. At first, I thought this quite odd, but I’m fairly sure this was in order to accommodate a larger speaker than it otherwise would have had.

For more on the DE1129 unit itself, be sure to read my initial impressions, which go into greater detail.

This little speaker packs a punch!

Audio

The audio from the built-in speaker is impressive–in fact, this is possibly the best feature of this little radio.  Just the other day, I was able to listen to an NPR FM station, with the volume turned up, as I cooked a meal; typically, I wouldn’t be able to hear a radio this small while doing other things–the output would be tinny with too much emphasis on the treble end of the audio, and the sound lost in all but a quiet room. However, the DE1129 speaker offers just enough bass to keep the audio (especially on FM, or from a quality digital audio file) comparatively rich and full. In essence, it sounds like a larger radio. Though the speaker lacks a bit of mid-range, the overall experience of listening to AM is quite pleasant, while FM is exceptional.

Digital Audio Player/Recorder

The “Music” mode will allow you to play pre-recorded MP3 files

With several of their latest DSP radios, Degen has added digital audio recording and playback features.  The DE1129 is no exception, and offers the following capabilities:

  • Records from a built-in microphone
  • Records directly from the radio while playing
  • Plays any MP3 formatted audio files
  • Offers many standard music playback options, like repeat, shuffle, etc.
  • Provides expandable memory via the insertion of a micro SD card into the radio, has 4GB of storage built-in

Perhaps the handiest feature is the fact that you can connect the Degen DE1129 to a PC, via supplied (standard) USB to miniUSB, for file transfer and maintenance. In my case, no additional software was needed for recognition of the DE1129 by my Windows 7 PC, which simply interpreted the radio as a storage device.

The “Voice” mode must be used to playback any recordings you make with the DE1129

NOTE: The DE1129 divides recordings into two different categories: “Music” or “Voice.”  “Music” is basically any MP3 file that is stored in the root directory of the radio (when viewed on your PC). “Voice,” on the other hand, is stored in the “Voice” folder on the radio and is accessible only via the radio’s “Voice” mode. I could not find a way, for example, to record music on the FM radio and save it in the “Music” category–I believe anything that is recorded on the radio itself will be filed under “Voice.” Of course, you can connect the radio to your PC, then manually drag the files from the “Voice” folder into the root directory to have access within the “Music” mode. If you actually used the built-in microphone to make a live recording, it will also be saved under “Voice.”

My DE1129 came with two preloaded MP3s–a Kenny G song and a Chinese pop song. I added a few of my own choices and, again, was favorably impressed with audio fidelity from its tiny speaker.

Recording from the radio, however, was a different story…

First of all, a note of caution: I know that some of the DE1129’s predecessors had  quality issues, when users tried recording from the radio without setting the volume to a very precise level.  I assume that’s the reason why, when you record from the radio, the DE1129 auto-adjusts the volume level to a rather specific setting. Therefore, while the radio is recording, you cannot adjust the volume. This wouldn’t be a problem, save the fact that the volume level it sets is rather loud. The first time I tried recording from the radio, I was using in-ear, noise-cancelling headphones; the radio rapidly shot the volume level up to such a level that I had to jerk the phones out of my ears to protect them. In many situations, I find the volume level via the built-in speaker a little loud, as well. You will not be able to discreetly record your favorite show during church or while eating dinner with the in-laws! During recording, I believe this radio adjusts the volume to 20.

Oddly, while recording, the DE1129 will allow you to engage the mute function–it even shows you the audio muted icon–but it has no effect on the audio level, whatsoever.

The “Record” mode is only used to record via the tiny built-in microphone–quality is quite good for voice

There are two levels of quality when recording: 129K or 96Kbps. Regardless of the setting, I find that there is a loss of quality when recording via the built-in recorder, though perhaps slightly less than with previous Degen models. When I recorded a stong FM station at 129K, I notice at least a 20% degradation in audio quality. The recorded audio sounds slightly muffled and garbled, more like an MP3 recording made at 48 Kbps. There was a noticeable lack of the higher and lower tones which make the DE1129’s internal speaker otherwise sound quite crisp.

There is a less noticable difference in audio quality while recording AM radio (whether shortwave or medium wave/AM). No doubt, this is due to the fact that AM radio lacks the higher and lower audio characteristics and general fidelity of FM radio.  While AM recording quality is acceptable and content is intelligible, for playing back a recorded program, it certainly leaves a lot of room for improvement. As with FM recordings, AM recording sounds muffled.

I would not recommend purchasing the Degen DE1129 if you’re seeking an all-in-one unit to record quality radio on-the-go. If you can settle for a mediocre recording, and you don’t mind the fact that while you’re recording, the radio will be playing at fairly high volume, then this may be a useful feature.

Radio performance

The “FM Radio” mode is actually the mode for all radio bands, including shortwave and medium wave

While I spent the bulk of my time testing the DE1129 on the shortwave and AM/MW bands, I will cover all three bands in order of performance, starting with the best.

FM

The Degen DE1129 is an excellent FM radio. In my tests, it received both strong and weak stations with relative ease and compared very favorably to my Eton S350DL, which I routinely use for receiving weaker FM stations in my area. Again, FM sounds great via the DE1129’s built-in speaker, providing nearly room-filling sound from a very tiny package.

The DE1129 (lower right), with its competitors, the Grundig G3 (top) and Tecsun PL-380 (lower left)

Shortwave

I always spend the bulk of my radio review time on the shortwave bands, of course, and to test the DE1129, I pitted it against my trusty Tecsun PL-380 and Grundig G3. Note, however, that neither the G3 nor the PL-380 have recording capabilities.

Sensitivity

First, the good news. Shortwave sensitivity, in general, is fairly good on the Degen DE1129. With it, I was able to hear most of the weaker stations that were received by the PL-380 and G3. I believe adding a length of wire to the antenna with an alligator clip–as there is no external antenna jack–could slightly improve performance. I may test this further. Again, since the radio lacks a fold-out stand and the telescopic antenna cannot rotate, attaching a wire to the antenna will be less than practical, as this will tip the radio over.

But unfortunately, the DE1129 suffers from several shortcomings that make it the clear loser against its two similarly-priced competitors. Note that I mentioned a few of these problems in my initial impressions post. Here is more detail, by function:

This image, with English translations for the keys on my DE1129, helped me identify each button’s function. Since there aren’t many buttons, I found that only after a few minutes of using the radio, I no longer needed to reference it. Click to enlarge

AGC (Automatic Gain Control)

The pre-defined AGC level is simply inadequate for comfortable shortwave radio listening of weaker signals. As mentioned above, though the radio has the sensitivity to detect the weak signals that its competitors can readily detect, the AGC gets in the way of comfortable listening. It creates a sort of pumping effect on weak stations, and truly seems to be “all or nothing:” at times, the radio’s signal will pop into clarity, then back into obscurity–obviously, it does not handle fading very well. The G3, in contrast, even without the sync detector engaged, did a much better job.

Bandwidth

The bandwidth is fixed–non-adjustable–on the DE1129. It is adequate for general shortwave broadcast listening, but a little too wide when you have two strong stations crowded together. Several times, adjacent broadcasts would bleed into the broadcast I was monitoring. I would expect even some rudimentary bandwidth control on a radio in the $100 US price category; the G3 (at $99) has wide/narrow, and the PL-380 (at $60 US) actually can be adjusted in 1 kHz increments from 6 kHz down to 1 kHz.

Single-Side Band

The DE1129 does NOT have SSB, thus would be useless for monitoring ham radio traffic, or listening to pirate radio stations in SSB, for example. The similarly-priced Grundig G3 does, of course, have SSB.

Shortwave can only be tuned in 5 kHz steps

Frequency steps

Unfortunately, the DE1129 has fixed frequency steps at 5 kHz; you cannot adjust it to be more or less.  In comparison, both the PL-380 and G3 can be adjusted down to 1 kHz steps.

Since the DE1129 mutes between frequency changes, it creates a “chuffing” sound while band scanning or tuning much like the PL-380. The Grundig G3, in contrast, tunes with smooth, continuous sound–much like an analog radio.

Tuning Speed

I normally don’t bother commenting on tuning speed, but I find that band scanning on the DE1129 leaves something to be desired. It’s rather arduous.

The DE1129’s hard plastic band covering the tuning wheel may protect it if dropped, but it’s also in the way of your thumb for easy tuning on the side

The tuning speed is not adaptive. Meaning, if I turn the tuning dial faster, it doesn’t increase the speed of tuning. This is very frustrating, especially since the model I reviewed does not have direct frequency entry via a number keypad. If I want to move from 5800 kHz to 6100 kHz, it takes a lot of tuning to get me there!

If I were stuck with the DE1129 as my only shortwave radio, I would be forced to fill its memory bank with all of my favorite frequencies, just to make tuning easier.

The DE1129 does have two different ways to navigate the shortwave spectrum:

  • By pressing the “Shortwave” button repeatedly, the DE1129 will move you from one SW meter band to the next highest. This is the only practical way of tuning.
  • The other way, (practical only if you want to listen to something outside of the normal broadcast meter bands) is to manually tune the entire SW spectrum (2.3 – 23 MHz) in 5kHz increments. Since the tuning rate is rather slow, this is a cumbersome process to say the least. To make it go a little faster, you could allocate memory locations, say at 3, 4, 5, 6 MHz etc. to make points (or bookmarks) from which you could tune.

Noise

My observation is that the radio’s internal processor and/or display seem to inject noise into the DE1129. This is especially noticeable on medium wave (see below).

While testing the radio against the G3 and PL-380, I even noticed that I could hear the (tuning) encoder noise of the DE1129, emanating from it, and even from other radios operating within two feet of it. Each tuning increment (via the tuning wheel) would produce a clicking sound in the audio of not only the DE1129, but even more noticably in that of other radios. The DE1129 is obviously generating a little RF noise of its own.

SW Summary

At $100 US, the DE1129 is simply not a good value for those interested in shortwave radio performance. Perhaps if it were in the $40-50 category, my expectations would be lower, and it might meet them at this price point. At the very least, a wide/narrow bandwidth control and the ability to speed up/slow down tuning speed would make this a more pleasant  and functional radio.  The sloppy AGC alone, though, would still keep me from recommending the DE1129 as a good shortwave radio.

AM/Medium Wave

On the positive side, the DE1129 can be used in any ITU region as the user can specify either 9kHz or 10 kHz spacing, although there is no option for choosing frequency steps less than 9 kHz.

How well does the DE1129 perform on medium wave? Not so well, I’m afraid–it’s mediocre at best. Medium wave suffers from many of the same problems as shortwave (described above), including the fact that the DE1129’s AGC (Auto Gain Control) simply cannot handle the up-and-down nature of weak AM stations.

Ticks like a clock?

Perhaps worst of all, though, is a “ticking” sound that plagues this Degen’s audio on the medium wave band. Spaced almost at second intervals, this “ticking” sound is present most anytime I listened to an AM broadcast. It was less noticeable in robust local broadcasts, but was still there, nonetheless. Recording a broadcast only seemed to make it more noticeable.

Unfortunately, if you purchase the DE1129 to listen to medium wave, you are likely to be disappointed.

The DE1129’s thin rechargeable pack fits neatly into the battery compartment on the back of the unit

Battery

As mentioned in my initial impressions, the DE1129 operates on a slim 3.7V 850 mAh Li Ion battery pack. Unlike most other shortwave portables on the market (but similar to the Grundig G2 and Degen DE1128), it does not operate on AA batteries.

No doubt, the slender battery pack allows for the compact form factor of the DE1129. In my testing, I found that the battery life is very good. Indeed, I have not needed to re-charge the battery even though I’ve played the radio for many hours in testing. I cannot speak to the overall longevity of the battery pack, however.

While I’m sure these battery packs are convenient, I still prefer the traditional AA battery.  If this battery pack wears out, I will have to order a replacement, whereas most portable radios only require the ubiquitous AA cell.

Stacking up the pros and cons

The rechargeable battery pack is very slim

Every radio has positive and negative attributes, and the DE1129 is no exception. Alas, in this case–especially since I’m reviewing this with a focus on shortwave and radio performance–the negatives outnumber the positives.

Pros:

  • Audio from built in speaker is superb for size (see con)
  • Sturdy, smooth plastic body (see con)
  • Perfect small size for travel
  • Strong FM radio performance
  • Ability to record either via built-in microphone or directly from radio (see cons)
  • One-button recording from any radio band
  • Crisp, easy to read backlit display
  • MP3 playback and functionality
  • Simple interface via supplied USB cable to both charge the radio and add/maintain recordings and MP3s
  • MW frequency steps can be adjusted between 9/10 kHz
  • Up to 32 GB of additional storage via micro SD card
  • Built-in microphone recordings of voice notes are excellent

Cons:

  • DE1129 plastic body lacks a back-stand and telescopic antenna cannot rotate
  • Shortwave performance is mediocre, AGC can’t handle weak signals and QSB
  • Mediumwave performance is poor, AGC flounders on weak signals, and most of the MW band is plagued with a ticking noise
  • Bandwidth cannot be changed and is too wide for crowded SW broadcast conditions
  • No direct frequency entry (though Degen plans to add this very soon!)
  • No complete (stand-alone) charging adapter; USB cable only, to plug into PC or wall-mounted USB charger
  • Tuning rate is fixed on SW at 5 kHz and not adaptive if you turn the dial faster
  • 4 or 5 second delay when turning radio on
  • Additional delays in response when changing frequency, mode, band and starting/ending a recording
  • Protective tuning knob strap prevents thumb tuning
  • While recording from radio, the volume level will spike loudly and cannot be changed or muted regardless if using built-in speaker or headphones
  • Recorded radio audio suffers from compression and is significantly degraded from the original broadcast–less noticeable on SW and MW/AM
  • No external antenna jack
  • No English manual (at time of this review, though I imagine this will be forthcoming)
  • In the current firmware version, the radio mode is displayed as “FM Radio” in the menu selection, though this mode covers all radio bands
  • There are no backlight options or modes that I could find–if you touch a control or move the frequency, the display will remain backlit for only about 10 seconds (please comment if you know how to change this)

Summary

I really should have started this review with the following disclaimer: it is possible that there is functionality to this radio, and adjustments that can be made to it, that I have yet to discover.  To my knowledge, I have toured and tried every menu option and explored every possibility with the radio’s settings.  However, since this is an early production unit and all of the instructions are in Chinese, I could easily have missed something. Future firmware updates and the forthcoming numeric keypad could also change my opinion of the DE1129.

With that said, I can freely comment on my experience:

If you are looking for a very compact radio with good FM reception, with MP3 recording and playback, with a compact form factor and a wonderful built-in speaker, you may want to consider the Degen DE1129 in your search.

If you are seeking a good shortwave or mediumwave radio, however, I would look elsewhere.

Overall, I feel like the DE1129 has much room for improvement, and I hope Degen is listening and will make firmware upgrades to quickly address some of my criticisms above. It’s as if  the DE1129 was built around the MP3/FM functionality and shortwave/mediumwave was simply an add-on, a bonus feature. I would never use the DE1129 for shortwave DXing, and certainly not for mediumwave DXing. The fact that the radio receives noise from its CPU–especially the ticking sound on MW–makes me believe that it was not thoroughly tested before production.

The Degen DE1129 & box (Click to enlarge)

For the price point (currently $100 US, shipped from the manufacturer), I simply expect better performance. In my tests, the Grundig G3 and Tecsun PL-380 outperformed the DE1129 in every respect on shortwave and mediumwave.

TecsunRadio.com provided a sample unit for this review and I paid for DHL shipping.  I can say that I’ve been very pleased with customer service at TecsunRadio.com. Since they are in a different time zone, and English is their second language, communication was slow, but they answered my many questions.

To my knowledge, the Degen DE1129 is only available from TecsunRadio.com and can be purchased for $80 US plus $20 shipping internationally.

Spread the radio love