Introducing the amazing SULA: An affordable unidirectional DX-grade loop antenna that you can build!

Many thanks to SWLing Post contributor extraordinaire, 13dka, who brings us a three part series about the new SULA homebrew antenna project. This first article describes this affordable antenna and demonstrates its unique reception properties. The second article will focus on construction notes. The third and final article will essentially be a Q&A about the SULA antenna. All articles will eventually link to each other once published.

This wideband unidirectional antenna is an outstanding and innovative development for the portable DXer. I love the fact that it came to fruition via a collaboration between Grayhat and 13dka: two amazing gents and radio ambassadors on our SWLing.net discussion board and here on the SWLing Post. So many thanks to both of them!

Please enjoy and share SULA Part 1:


Introducing the Small Unidirectional Loop Antenna (SULA) 1-30MHz

A small and simple, unidirectional and DX-capable loop “beam” for SWLs!

by 13dka

In early June, Andrew (grayhat), SWLing Post‘s resident antenna wizard suggested a variation of the “cardioid loop” on the SWLing Post message board: The original “cardioid loop” is a small loop receiving antenna deriving its name from a cardioid shaped (unidirectional) radiation footprint. The design is strikingly simple but it has a few downsides: It relies on a custom preamp, it needs a ground rod to work and it is unidirectional only up to 8 MHz.

Andrew’s version had the components all shuffled around and it did not only lose the ground rod, it also promised a nice cardioid pattern over the entire shortwave, from a small, diamond shaped loop. Wait…what? It can be made using parts available on Amazon and your DIY store:

You need some 3m wire and PVC tubes to create a support structure to hold the wire, a 530 Ohm resistor and a 9:1 balun like the popular “NooElec One Nine”. Since it’s a “lossy” design, adding a generic LNA like the NooElec “LANA HF” would help getting most out of it. When you put that all together you have what sounds like an old shortwave listener’s dream: a small, portable, tangible, and completely practical allband shortwave reception beam antenna with some more convenient properties on top, for example, it is a bit afraid of heights.

That sounded both interesting and plain crazy, but the .nec files Andrew posted were clearly saying that this antenna is a thing now. Unfortunately Andrew suffered a little injury that kept him from making one of those right away, I on the other hand had almost all the needed parts in a drawer so I ended up making a prototype and putting it through some of its paces, with Andrew changing the design and me changing the actual antenna accordingly, then mounting it upside down. Let me show you around:

  •  Small, diamond shaped wire loop (with 76cm/29.92″ sides), needing as little space as most other small loops.
  • Unidirectional with a ~160° wide “beam” and one pronounced minimum with a front/back-ratio of typically 20dB over the entire reception range 1-30MHz.
  • Moderate height requirements: It works best up to 3m/10′ above ground, where it gives you…
  • …a main lobe with a convenient flat takeoff angle for DX
  • Antenna is comparatively insensitive to ground quality/conductivity.
  • Wideband design, works best on shortwave and is pretty good up to 70cm.

A functional small beam antenna for shortwave reception that’s just as small and possibly even more lightweight (prototype:~250g/9oz) than your regular SML, that can be easily made out of easy to obtain parts and easily carried around for mobile/portable DXing and due to its cardioid shaped directional pattern also for direction finding, a “tactical” antenna that’s also doing DX? Unlike conventional, Yagi-Uda or wire beams it can achieve a low takeoff angle at only 3m/10ft height or less, the front/back ratio is typically better than that of a 3-element Yagi, with a particularly useful horizontal pattern shape. That it’s rather indifferent to soil quality could mean that more people get to reproduce the good results and being a real wideband antenna is making the SULA an interesting companion for multiband radios and SDRs. Really? A miracle antenna? Is it that time of year again? If I had a dollar for every….

Continue reading

Spread the radio love

Eton Elite Satellit HD Receivers – Now Shipping

Eton Elite Satellit HD

Thanks to commenter Keith on my “Consistently Inconsistent” article, we learn that the Eton Elite Satellit HD receiver is now shipping. Keith purchased the receiver from Amazon.com and is expecting delivery on August 18.

Note that over the half-hour it took me to write this update article, Amazon’s stock of the Elite Satellit HD dropped from 19 to 10!

There are also updates on availability found on three other web sites:

  • Eton Corporation: No longer does their page say “Arriving this month – reserve yours today!”. Instead, the radio is shown as “available today!”
  • Hammacher Schlemmer: their web page indicates “In stock – available for immediate shipment”.   EDIT: Wow, that was quick! Just after I posted this article, HS changed their web page to “We regret that this item is no longer available”.
  • Universal Radio: Gone is the “available late August” statement, and the radio is available for adding to your shopping cart and checkout.

This is great news for those who have awaited the receiver since its announcement in 2019, and especially for those getting the radio at the original pre-order price (myself included :^)

Keith, thanks again for the heads-up on your Elite Satellit HD order. Please leave some first impression comments when you receive it!


A regular contributor to the SWLing Post, Guy Atkins lives in the beautiful Puget Sound country of Washington State.

Spread the radio love

Radio Waves: US Emergency Alert System Vulnerabilities, Tape Measure Antennas, Eight Year Old Chats with ISS, and Power of Prison Radio

Radio Waves:  Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!


“Huge flaw” threatens US emergency alert system, DHS researcher warns (ARS Technica)

Hackers can disrupt legit warnings or issue fake ones of their own.

The US Department of Homeland Security is warning of vulnerabilities in the nation’s emergency broadcast network that makes it possible for hackers to issue bogus warnings over radio and TV stations.

“We recently became aware of certain vulnerabilities in EAS encoder/decoder devices that, if not updated to the most recent software versions, could allow an actor to issue EAS alerts over the host infrastructure (TV, radio, cable network),” the DHS’s Federal Emergency Management Agency (FEMA) warned. “This exploit was successfully demonstrated by Ken Pyle, a security researcher at CYBIR.com, and may be presented as a proof of concept at the upcoming DEFCON 2022 conference in Las Vegas, August 11-14.”

Pyle told reporters at CNN and Bleeping Computer that the vulnerabilities reside in the Monroe Electronics R189 One-Net DASDEC EAS, an emergency alert system encoder and decoder. TV and radio stations use the equipment to transmit emergency alerts. The researcher told Bleeping Computer that “multiple vulnerabilities and issues (confirmed by other researchers) haven’t been patched for several years and snowballed into a huge flaw.”

“When asked what can be done after successful exploitation, Pyle said: ‘I can easily obtain access to the credentials, certs, devices, exploit the web server, send fake alerts via crafts message, have them valid / pre-empting signals at will. I can also lock legitimate users out when I do, neutralizing or disabling a response,’” Bleeping Computer added. [Continue reading…]

Just how good is a tape measure antenna anyway? (Hackaday)

Amateur radio operators have played a longstanding game of “Will It Antenna?” If there’s something even marginally conductive and remotely resonant, a ham has probably tried to make an antenna out of it. Some of these expedient antennas actually turn out to be surprisingly effective, but as we can see from this in-depth analysis of the characteristics of tape measure antennas, a lot of that is probably down to luck.

At first glance, tape measure antennas seem to have a lot going for them (just for clarification, most tape measure antennas use only the spring steel blade of a tape measure, not the case or retraction mechanism — although we have seen that done.) Tape measures can be rolled up or folded down for storage, and they’ll spring back out when released to form a stiff, mostly self-supporting structure.

But [fvfilippetti] suspected that tape measures might have some electrical drawbacks, thanks to the skin effect. That’s the tendency for current to flow on the outside of a conductor, which at lower frequencies on conductors with a round cross-section turns out to be not a huge problem. [Continue reading on Hackaday…]

Broadstairs eight-year-old to feature on NASA website after radio chat with ISS astronaut (The Isle of Thanet News)

A Broadstairs eight-year-old has chatted with an astronaut aboard the International Space Station and a recording of the conversation will feature on the NASA website.

Isabella Payne spoke to Astronaut Kjell Lindgren as the ISS flew overhead last week.

The youngster was with dad Matthew who is a license holding amateur radio enthusiast and tutor. He and Isabella are both members of Hilderstone Radio Society.

Matthew said: “Isabella has been a member of the radio club ever since she was born and has been playing with the radio since she was six. Because I have the full licence she can sit on my knee and use the radio to speak to people as long as I am controlling it. Everyone at the club can do that. She has been involved in a few radio events, Children On The Air events, and will hopefully go for her own licence soon. [Click here to read the full article and view the photos.]

The power of prison radio in giving voice to the voiceless around the world (ABC)

“I plan my life by the radio these days, my contact with the outside world in a sense…”

The first ever international prison radio conference has just been held in Norway, bringing together representatives of prison radio shows from 19 countries, including Australia, where Indigenous people continue to be grossly over-represented in prison populations.

Prison radio shows, wherever they are in the world, all work to give voice to the voiceless and empower people by enabling them to tell their own stories.

Click here to listen to the podcast episode.


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Alan Roe’s A22 season guide to music on shortwave (version 3)

Many thanks to SWLing Post contributor, Alan Roe, who shares his A-22 (version 3) season guide to music on shortwave. Alan provides this amazing resource as a free PDF download:

Click here to download Music on Shortwave A-22 v3 (PDF)

Thank you for sharing your excellent guide, Alan!

This dedicated page will always have the latest version of Alan’s guide available for download.

Spread the radio love

Video: The Erres KY-418 radio set WWII era assembly line

Many thanks to SWLing Post contributor, Adid, who writes:

The Erres KY-418 Radio set assembly line. You must watch this:

Click here to view on YouTube.

My heart goes to the poor guys who work under all that machinery noise with no ear plugs or with no mask when spray paint.

Everything is hand made in-house even the loudspeakers, coils or the rotary switches….

Just remember that WWII is on while it was made and I don’t think the KY-418 was a cheap radio…

Regards, Adi

Thank you for sharing this, Adid. You’re right: there were a few generations of folks who lost much of their hearing early on due to the constant noise on factory floors. 

That said, I’ve been enjoying these videos of early radio production lines. Thank you!

Spread the radio love

Julian spots a Panasonic RF-3000A on eBay

Many thanks to SWLing Post contributor, Julian, who writes:

Thomas,

I stumbled across this listing for a Panasonic RF-3000A so I thought I’d share it in case some SWLingers interested in or who collect vintage solid state radios are interested in the following listing for a Panasonic RF-3000A for US$125.00.

73
Julian

Click here to view on eBay.

Thank you for the tip, Julian! I don’t think I’ve ever seen this model of Panasonic before. At first blush, it looks like a Barlow Wadley.

Based on the description of the radio, it sounds like it might need a little work. I think a re-capping would be in order and I’m sure the pots and switches need an application of Deoxit.

Perhaps our resident Panasonic collectors will let us know if this radio is rare or common? I doubt it’s exceptionally rare since there have been 3 offers made on it in the past. Please comment!

Spread the radio love

Video: Vintage SONY Japan Manufacturing Plants

Many thanks to SWLing Post contributor, Dave Zantow, who writes:

[Check out this] YouTube video :

Vintage SONY JAPAN Manufacturing Plants: TRINITRON TV, Video Recorder, late 1960-1970s

Click here to view on YouTube.

This very interesting near 12 minute video shows Sony manufacturing plants.

At 2:10 you will see the CRF-150 / 160’s being manufactured.

Thank you so much for sharing this, Dave! This is chock-full of Sony nostalgia!

Spread the radio love