Yearly Archives: 2016

Max’s impressive vintage radio collection

Many thanks to SWLing Post contributor, Max Youle, who writes:

I thought I would send you a link to my radio collection.

Many of these are unique to New Zealand, and could be of interest to your readers.

I saved many of these radios from being trashed, by searching junk sales and second hand stores, over a period of the last 25 years

Click her to view Max’s collection via DropBox.

Wow! That is an impressive collection of radios, Max. It’s interesting to see so many New Zealand brands–I’m glad you’ve rescued these!

Max’s collection is so large I couldn’t possibly share them all here on the SWLing Post, so I asked Max if he could tell us which models are his favorites. Max replied:

My favorite radios would be:

Barlow Wadley XCR-30

1. Barlow Wadley XCR-30 featured here before https://swling.com/blog/2016/02/maxs-barlow-wadley-receiver-is-a-keeper/

Philips D2999

2. Philips D2999 for its good looks, ease of use , sound from the two speakers 3″ and 7″ and sharp MW DX

Sanyo Transworld 17h-815

3. Sanyo Transworld 17h-815 A beautiful looking classic with lots of chrome and a good performer

National Panasonic R-021

4. National Panasonic R-021 because it was my first radio, and a fairly rare collectible (article at the bottom of page) http://www.panasonic.com/global/corporate/history/chronicle/1977.html

Its hard to choose a favorite, as every one of my radios has a story ,i.e where I found it, who gave it to me, how much I paid for it, how collectible it is, etc, etc!!

Yes indeed, Max! It is difficult to pick a favorite–especially from such a large collection.

Thanks again for taking the time to share these with us!

Click her to view Max’s collection via DropBox.

Spread the radio love

London Shortwave’s portable “spectrum capture lab”

4 Replies

SWLing Post contributor, London Shortwave, just posted a photo of his portable SDR setup on Twitter and noted:

“Portable spectrum capture lab back in operation. Grabbing the grey line hour on the 49 mb. Listening to Radio Fana!”

Wow! I love this go kit!

Looks like London Shortwave is running an AirSpy with Spyverter via SDR# on his Windows tablet.

Having played a lot of radio in the field, I think what’s great about this setup is the fact it’s all contained and properly laid-out inside the padded case. Simply open the case, deploy an antenna, and you’re in business! With all components inside the case, there’s much less chance a connector, battery, cable or SDR will be left in the field accidently. Quick deployment and quick pack-up time; that’s what it’s all about!

Great job, London Shortwave! I’m happy to see you’re back in the park capturing spectrum and logging DX!

Spread the radio love

Tropical Band DXing at home with Elad FDM DUO and Wellbrook ALA1530 active loop

5 Replies

Recently I have spent a little more time listening out for Tropical Band stations from my shack in Oxford UK, attempting to emulate some of the very nice signals I have previously recorded out on DX’peditions. The obvious problems with this (and they are numerous) include the relatively weak signal strength of many tropical band stations, the ubiquitous blanket of QRM, resulting in generally poor SNR, lack of space for a large antenna……need I go on?! Fortunately, the Elad FDM DUO has proven to be a very senstive and selective receiver, capable of, at times, incredible SNR, coupled with almost limitless signal conditioning options and SSB, SYNC, ECSS etc. Throw the Wellbrook ALA1530 active loop into the mix (not literally!) and you have a very powerful Tropical Band receive set-up. The Wellbrook is able to null most (although not all) QRM in my shack and that really can make the difference between simply observing a carrier and actually hearing audio. Clearly one cannot expect to hear DX at home under heavy QRM as well as you might outdoors, however, the following stations were logged in the past month or so, with respectable signals, with the ALA1530 indoors:

Video links also follow below, thanks for reading/ watching.

Direct link to Oxford Shortwave Log video; Radio Logos 4810 kHz, Peru

Direct link to Oxford Shortwave Log video; Radio Cultura Ondas Manaus 4845 kHz, Brazil

Direct link to Oxford Shortwave Log video; AIR Bhopal 4810 kHz, India

Direct link to Oxford Shortwave Log video; Rádio Educação Rural 4925.2 kHz, Tefé, Brazil

Direct link to Oxford Shortwave Log video; Radio Mosoj Chaski 3310 kHz, Bolivia

Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.

Spread the radio love

Gary’s Arvin Model 61R35 brings back memories

3 Replies

Many thanks to SWLing Post contributor, Gary Wise (W4EEY), who shares the following guest post:

It’s funny how much we radio folks share in common. The recent posts on Arvin radios made me smile because I have an Arvin radio too. An Arvin transistor was my very first radio, and here she is:

This is the Arvin Model 61R35 in Ice Blue (it also came in black). My parents bought it for me in roughly 1962 or 63. It was the first radio that was mine (though we did have an older Crosley tabletop in the living room of our house in Midland, Michigan that we all used). Mine had seven Germanium (!) transistors (as silicon transistors were not yet in wide production in the early 60s).

And Made in America! Arvin was an Indiana company as I recall.

It used a Round 9V battery. They were hard to find even back then, and I expect impossible to find today.

I used to love to put my fingers on the PC board while the radio was on and listen to the buzzes and noise that I could create. Unfortunately, I think this is what killed the radio and required my folks to mail it off to the big city (Flint, Michigan) to have it repaired. No one in my “little” town could fix solid state radios back then.

I was fortunate not to lose this radio in my many moves throughout the years. I display in proudly in my ham shack.

Thanks for the memories!

73,

Gary
W4EEY

And thank you for sharing your memories and the great photos of your Arvin Model 61R35, Gary! What a cute little radio–I’m glad you’ve taken care of it all of these years.

Spread the radio love

Myanmar Radio, Yangon, heard in Oxford UK on 49 and 41 metres

2 Replies

Hi there, I thought some of the readers of SWLing post might be interested in my reception of Mayanmar Radio, Yangon, during a late-night DX’pedition in Oxfordshire, UK. I managed to catch them on 5985 and 7200 kHz; the latter was a personal first and perhaps further confirmation that my 200 metre longwire is contributing in a positive way to my mobile listening post. Subscribers and regular visitors to Oxford Shortwave Log on YouTube will know that I am forever trying to push the performance of my vintage portables to the limit of what’s possible, in the hope that I might hear something very exotic. it’s happened once or twice and thus worth all the effort in the small hours. Thanks for watching/ listening.

Direct link to Oxford Shortwave Log for Mayanmar Radio reception video 5985 kHz

Direct link to Oxford Shortwave Log for Mayanmar Radio reception video 7200 kHz

Spread the radio love

AM Mode: Comparing the Elecraft KX2 with the LNR Precision LD-11

4 Replies

My new Elecraft KX2 tuned to Radio Australia this morning.

I’ve only had my Elecraft KX2 since Monday evening and have been so busy, I’ve only had an hour or so to tinker with this pocket transceiver. Monday evening, before putting it on the air, I updated the KX2 firmware to the latest Beta release which includes the new AM mode.

I’ve had so many questions from readers about the KX2’s AM audio already, I thought I’d do a quick comparison with the LNR Precision LD-11.

I set the LD-11 to a bandwidth of 9.6 kHz, and the KX2 to 5 kHz: their widest AM filter settings. Keep in mind, this is not an apples-to-apples comparison, but it does showcase each radio’s potential AM audio fidelity.

I tuned both rigs to the Voice of Greece last night on 9420 kHz around 00:30 UTC. VOG’s signal was strong into North America.

I made the following recordings with my Zoom H2N digital recorder, by feeding in-line audio patched from each radio’s headphone jack. I tried to balance the audio levels between the two rigs.

Here are the results:

The LNR Precision LD-11

Click here to download the audio.

The Elecraft KX2

Click here to download the audio.

The Elecraft KX2 in “Delay” audio mode

Note: Some Elecraft radios have an audio effects mode which includes a “delay” function. Elecraft describes it as “a quasi-stereo effect intended to provide depth and space to the received audio.” On an AM broadcast signal, it makes it sound wider and gives it almost a stereo depth.

Click here to download the audio.

I think the results from both radios are impressive. Since the LD-11’s bandwidth can be widened to 9.6 kHz, strong signals like this one sound pretty amazing. In truth, I actually prefer a filter width of about 8.2 kHz on strong signals, but VOG was wide enough to justify 9.6 kHz. I believe the LD-11 would rival many dedicated tabletop receivers.

The Elecraft KX2, in normal audio mode, sounds flatter and narrower than the LD-11 of course, but still very pleasant! In the KX2’s “delay” audio mode, the signal sounds much wider than 5 kHz, though the effect adds a little graininess to the audio. That’s okay, though–I love having the “delay” audio option in my tool bag.

Here’s what amazes me as an SWL and ham radio operator: both of these QRP transceivers offer excellent HF broadcast listening opportunities.

Please comment! Which audio sample do you prefer? Do you like the “delay” audio effect on the KX2? Keep in mind this is only one comparison and doesn’t address sensitivity or selectivity.

Spread the radio love

Galena, Alaska: Paul’s evolving listening post

6 Replies

Many thanks to SWLing Post contributor, Paul Walker, who writes:

My listening post as it stands now

Time: 1600-1700 UTC
Location: Galena, Alaska (Rural central interior, halfway between
Nome & Fairbanks)
Equipment:Tecsun PL880, 225 foot long wire oriented north south and 225 foot long wire oriented east west, EmTech ZM2 Antenna Tuner, Workman Antenna Switch and DXEngineering RPA-1PLUS HF PreAmp

Paul, I hope you’re enjoying the good weather while it’s still summer! I imagine the days and nights are getting cooler already and soon, that beautiful stretch of Yukon will be frozen.

I’m happy to see you’re employing the ZM-2 tuner; it’s an effective little antenna manual tuner and doesn’t need a power source. Plus, if you ever get your ham radio license, you can use it in the field with QRP equipment. You’ve got a great setup there with quality components!

Spread the radio love